• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.2
• /
• pp.11-19
• /
• 2013

Many companies are developing a numerous number of new products and business models for their sustainable growth. First, their unique technological capability needs to be obtained to develop new products and services. However, as the applicable period of a technology into its industrialization becomes shorter and shorter, the necessity of technological convergence is increasing. Therefore, this study aims to look at the patent status in Korea for the last ten years to analyze in which direction technological convergence had advanced and further compare the patent status in Korea with that in U.S., Europe, and Japan. In addition, this study looks at the impact of converged patent technology on the sales in relevant industries. To this end, this study collected 5,000 patents applied from 2000 to 2009 for the last ten years in Korea, U.S., and Europe every year and conducted network analysis by using UCINET, social network analysis program. In this study, we drew our research findings as follows: First, we could find that technological convergence increased over time and what technology was in the center of fusion. Second, our correlation analysis found that as we had more technological convergence, it was more related to the sales in relevant industries.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.141-150
• /
• 1999

Twenty organic chemical substances, tetrachloroethylene, toluene, ethylbenzene, p-xylene, m-xylene, isopropyl benzene, stylene, bromobenzene, 1,3,5-trimethylbenzene, 2-chlorotoluene 1,2,4-trimethylbenzene, p-isopropyltoluene, 4-chlorotoluene, n-butylbenzene, 1,2,4-trichlorobenzene, naphthalene, tert-butylbenzene, sec-butylbenzene, phenol, isopropyl benzene hydroperoxide were isolated from untreated and treated wastewater collected at 76 companys of 9 types industry in the basin of Young San River. Their organic compounds were elucidated by Gas Chromatography/Mass Spectrometry (GC/MS) and by comparison with each standard reagents. Especially, phenol compound is detected from effluent water but not detected from plant wastewater in the chemical industry. Heavy metal, which are Cr, Mn, Cu, Zn, Cd, Pb, As, Al and Fe, are contained in the plant wastewater of all industry, Fe, Al of them is more detected than the other metals in plant wastewater. Cr, Cd, Pb, As is contained much in plant wastewater of electricity and electron, metal molding industry. Nine metals is nearely treated when plant wastewater is treated, and then the concentration of each other metals is detected below water quality standard or not detected by using AA.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.38.2-38.2
• /
• 2011

폴리머 박막은 그 고유한 특성으로 인해 여러 산업적으로 널리 사용되고 있는 재료이다 예로 의약품이나 식품 포장지의 배리어, 전자부품의 절연체, 반도체 공정에서의 사용, 혹은 부식방지를 위해 사용 되어지기도 한다. 이 폴리머 박막을 증착 하기 위한 방법으로 이전부터 CVD (Chemical Vapor Deposition) 방법이 많이 사용되었고 지금까지도 가장 많이 사용되는 방법이다. CVD를 사용하여 $SiO_2$-like 필름의 증착은 전구체(precursor)로 Silane ($SiH_4$)을 사용하였으며, 플라즈마 발생 소스(source)로 열 혹은 전기장 등을 사용 하며 공정 시 압력 또한 대부분 저압 하에서 실시 하였다. 이와 같은 이전 CVD 방법의 문제는 사용되는 Silane 자체가 인체에 해로울 정도로 독성이 있으며 폭발성도 같이 가지고 있어 작업환경의 위험성이 높으며 열을 사용한 CVD의 경우 높은 공정 온도로 인해 증착 할 수 있는 대상이 제한 되어 지며 높은 열의 발생을 위해 많은 에너지의 소비가 필요하다. 저압 플라즈마를 사용한 CVD 는 공정상 높은 열의 발생이 일어나지 않아 기판 운용상 문제가 되지 않지만 저압 환경에서 해당 공정이 이루어기 때문에 인해 필수적으로 고가의 진공 챔버가 필수적이며 저압을 유지할 고가의 진공 펌프나 추가 장비들이 필요하게 된다, 또한 챔버 내에서 이루어지는 공정으로 인해 공정의 연속성이 떨어져 시잔비용 또한 많이 잡아 먹는다. 이러한 열 혹은 저압 플라즈마등을 사용한 공정의 단점을 해결하기 위해 여러 연구자들이 다양한 방법을 통해 연구를 하였다. 대기압 유전체 배리어 방전(AP-DBD: Atmospheric Pressure-Dielectric Barrier Discharge)을 사용한 폴리머 박막의 증착은 이전 전통적인 방법에 비해 낮은 장비 가격과 낮은 공정 온도 그리고 연속적인 공정 등의 장점이 있는 폴리머 박막 증착 방법 이다. 대기압 유전체 배리어 방전 공정 변수로 공급 전압 및 주파수 그리고 공급 전압의 영향, 전구체를 유전체 배리어 방전 전극으로 이동 시키기 위해 사용된 캐리어 가스의 종류 및 유량, 화학양론적 계수를 맞추기 위해 같이 포함되는 산소 가스의 유량, DBD 전극의 형태에 따른 증착 박막의 균일성 등 이 존재하며 이런 많은 변수 들에 대한 연구가 진행 되었지만 아직 이 대기압 DBD를 이용한 폴리머 박막의 증착에 대한 명확한 이해는 아직 완전 하다 할 수 없다. 본 연구에서는 이러한 대기압 DBD를 이용하여 폴리머 박막의 증착시 영향을 미치는 많은 공정 변수 등이 박막생성에 미치는 영향과 증착된 박막의 성질에 대한 연구를 진행 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.664-668
• /
• 2018

Free-standing structures that are especially high are more likely to receive brain attacks caused by lightning. Since special structures are generally part of national industrial structures, lightning strikes mostly cause socio-economic damage. Lightning protection facilities are installed to prevent such lightning damage, but in 2015, support cables on West Sea bridges were hit by lightning, causing a lot of economic damage. Accordingly, the design of a lightning protection system shall establish protective measures after analyzing the risk of debris falling onto the structure. In this thesis, lightning strikes are analyzed directly in relation to the modeling system that operates the actual information collection system for lightning strikes, depending on the location of the tall, free-standing structures, and practical lightning hazard information is provided by a meteorological station. In addition, we propose monitoring and applying a probability correction rate to the calculation of the lightning risk based on the number of lightning strikes directly reaching the ground in order to obtain an effective lightning risk assessment.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.06a
• /
• pp.91-120
• /
• 1996

경제발전과 더불어 산업의 많은 분야에서 순수 및 초순순의 사용이 증가하고 있으나, 환경오염에 의한 원수의 오염에 따라 순수 및 초순순제조의 장치비와 처리비용의 증가가 야기되고 있다. 현재 국내에는 화력, 원자력발전소를 비롯하여 열병합발전소, 석유화학공장, 제약회사, 전기 전자부품회사, 반도체회사 및 철강회사 등 많은 분야에서 순수 및 초순수 제조장치의 구성과 성능이 많은 차이를 나타내고 있다. 국내의 초순수 제조장치는 90% 이상이 이온교환수지를 사용하는 이온교환법과 UF, R/O System과 같은 Membrane을 사용하는 Membrane System을 병행하여 적용하고 있다. 국내 초순수처리 Plant에서는 통상 전처리 System과 1차 순수제조 System 및 초순수 System이 상호 연결되어 Plant가 구성 운영되고 있다. 전처리 System에는 응집침전, 여과 흡착, 살균 등이 적용되고 있으며 여과 System에 Membrane을 적용할 수 있으나 국내에서는 특별한 경우를 제외하고 대부분 전처리 여과 System에 Media Filter를 사용한다. 전처리 System도 순수처리 장치의 전처리로는 없어서는 안되는 System이지만 여기에는 전처리 System을 제외하고 국내에서 적용하고 있는 초순수처리 System의 공정현황과 각 System별 특징을 설명하고 있다. 초순순 System에는 요구 수질에 따라 다소 차이가 있지만 반도체 공업에서 사용되는 초순수 System이 이중 최고의 Grade로 반도체공업에서 적용되고 있는 System을 기준하였다. 특히 Membrane을 적용한 초순수제조 System이 증가하고 있어 R/O, ED, EDR, CDI, (EDI)와 같은 Membrane System의 특성과 원리를 검토하였다.대적으로 높은 산소확산계수와 물에 대해서는 낮은 투과도를 가져야 한다. 높은 산소확산계수는 반응을 빠르게 하는 잇점이 있으며 물에 대한 낮은 투과도는 센서내의 전해질 물질을 유지보호하는 역할을 한다. 분리막이 산소전극에 이용될 경우 높은 산소 확산계수 이외에도 적절한 기계적 강도, 열적 안정성 등이 요구된다. 몰입이 가능하여 임계치가 저하된 것으로 여겨진다. 또한 광학적 이득의 존재는 이 구조에 의한 극단파장 반도체 레이저다이오드의 실현 가능성을 나타내는 것이다.548 mL에 비해 통계학적으로 의의 있게 적었다(p<0.05). 결론: 관상동맥우회로 조성수술에서 전방온혈심정지액을 사용할 때 희석되지 많은 고농도 포타슘은 fliud overload와 수혈을 피하고 delivery kit를 사용하지 않음으로써 효과적이고 만족할 만한 심근보호 효과를 보였다.를 보였다.4주까지에서는 비교적 폐포는 정상적 구조를 유지하면서 부분적으로 소폐동맥 중막의 비후와 간질에 호산구 침윤의 소견이 특징적으로 관찰되었다. 결론: 분리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술은 통증이 적고, 입원기간이 짧고, 사회

• Resources Recycling
• /
• v.11 no.6
• /
• pp.3-11
• /
• 2002

Recently, waste printed circuit board (PCB) has significantly increased in its amount due to the rapid development of electronic industries. Since several kinds of noxious materials and also valuable metals are contained in it, the waste PCB is in an urgent need of recycling for the dual purposes for the prevention of environmental pollution and recovery of valuable resources. Also, the catalyst which equipped in the exhaust pipes of automobiles to reduce emission of air pollutants contains precious met-als so that their recovery from the waste auto-catalysts is required. In this study, the recovery of valuable metals from waste PCB and auto-catalyst by arc furnace melting process has been investigated, which is known to be very stable and suitable f3r less production of pollutants due to its high operating temperature. The effect of the kind of flux on the recovery of precious metals was examined by using quicklime, converter slag, and copper slag as the flux. In addition, the influence of direct and alternating current and the applying direction of direct current has been investigated. It was observed that using converter or copper slag as a flux was more desirable for a higher efficiency in the precious metal recovery compared with quicklime. For the effect of current, application of direct current taking the bottom as a negative pole generally showed a better efficiency for the extraction of valuable metals from waste PCB, which was also observed for the case of waste auto-catalyst. The average recovery of precious metals from both wastes by arc furnace melting process was very high, which was up to in the range of 95～97%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.114-123
• /
• 2007

As a promising technology that enables ubiquitous computing and will lead the information technology industries of the next generation, the new field of sensor networks is one of the most active research topics today. From now on, each node, the network formation, and even the sensor network itself will interact with the generic network and evolve dynamically according to environmental changes, in a process of continual creation and extinction. In this paper, we propose a address-Internetworking scheme for interactive networking between a sensor network and the Internet based on the TCP port-numbers. The proposed scheme enables internetworking between a sensor network address scheme based on Zigbee and the Internet address scheme based on the Internet Protocol version 6 (IPv6). We implement the proposed address-Internetworking scheme using Berkeley TinyOS, Mica Motes, and IP. In addition we verify the proposed scheme by an interconnection experiment, which involves wireless sensor networks and the Internet, using IPv4/IPv6.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.123-128
• /
• 2021

For accurate speed and current control in industrial applications, SRM (Switched Reluctance Motor) is very important to synchronize the stator phase excitation and rotor position in the drive due to its nature. In general, position sensors such as encoder and resolver are used to generate rotational force by exciting the stator winding according to the rotor position and to control the motor by using speed and position information. However, for these sensors, 1) the cost of the sensors is quite large in terms of price, so the proportion of the motor system to the total system cost is high. 2) In terms of mechanical, position sensors such as encoders and resolvers are attached to the stator to increase the size and weight. In conclusion, in order to drive the SRM, control based on the rotor position information should be basically performed, and it is important to design the SRM driving system according to the environment in consideration of the application field. Therefore, in this paper, we intend to study the driving and control characteristics of SRM through variable switching duty control by designing a low-cost analog driving device, deviating from the general control system using the conventional encoder and resolver.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.801-807
• /
• 2021

In various industrial fields and infrastructure based on electronic components, such as communication equipment, transportation, computer networks, and military equipment, the need for electromagnetic pulse shielding has increased. Two methods for applying electromagnetic pulse shielding are effective. The first is construction using shielding materials, such as shielding concrete, shielding doors, and shielding windows. The other is coating shielding paints on non-shielding structures. Electromagnetic pulse shielding paints are made using conductive materials, such as carbon nanotubes, graphite, carbon black, and carbon fiber. In this paint, electromagnetic pulse shielding performance is added to the commonly used water-based paint. In this study, the shielding effectiveness and bonding performance of paints using conductive graphite and carbon black as shielding materials were evaluated to develop electromagnetic pulse shielding inorganic paints. The shielding effectiveness and bonding performance were evaluated by applying six mixtures composed of different kinds and amounts of shielding material. The mixture of conductive graphite and carbon black at a weight ratio of 1:0.2 was the most effective in shielding as 33.6 dB. Furthermore, the mixture produced using conductive graphite only showed the highest bonding performance of 1.06 MPa.

• Clean Technology
• /
• v.27 no.2
• /
• pp.132-138
• /
• 2021

Research is being conducted on graphene to provide graphene having both excellent physical as well as electrical properties in addition to unique physical properties. In this study, Hummer's method, which is a representative method for chemical exfoliation, was applied in order to investigate the possibility of the mass production of high-quality graphene oxide. Three types of graphite (graphite, crystalline graphite, and expanded graphite) were used in the preparation of graphene oxide with variations in the amount of potassium permanganate added, reaction temperature, and reaction time. Then a Fourier transform infrared spectroscopy (FT-IR), a Raman spectrometer, and a transmission electron microscope (TEM) were used to measure the quality of the prepared graphene oxide. Of the three types of graphite used in this experiment, crystalline graphite showed the highest quality. The prepared graphene oxide was then purified with an organic solvent, and an analysis conducted using energy dispersive X-ray spectroscopy (EDS). From the results of the residual values, we were able to confirm that both acid wastewater and wastewater were best purified using cyclohexane. The method for manufacturing graphene oxide as well as the method of purification using organic solvents that are presented in this study are expected to have less of an environmental impact, making them environmentally friendly. This makes them suitable for use in various industrial fields such as the film industry and for heat dissipation and as coating agents.