• Pediatric Infection and Vaccine
• /
• v.15 no.2
• /
• pp.180-187
• /
• 2008

Purpose : We wanted to determine the characteristics of patients with Kawasaki disease (KD) who were unresponsive to intravenous immunoglobulin (IVIG). Methods : The patients with KD were divided into two groups: the IVIG responsive group (25 cases) and the IVIG unresponsive group (14 cases). We analyzed various parameters before and after the administration of IVIG, including the complete blood cell count with the differential count (%), the erythrocyte segmentation rate (ESR), the C-reactive protein (CRP) level and the protein and lipid profiles. Results : The IVIG unresponsive group had a prolonged duration of fever and a higher incidence of CAL compared to the IVIG responsive group (P<0.001, respectively). Before IVIG infusion, the neutrophil differential, the ESR and the CRP values were higher (P<0.001), and the total protein and albumin values were lower in the IVIG unresponsive group (P=0.01) compared to the IVIG responsive group. After IVIG infusion, there were no significant changes in the WBC count and CRP levels in the IVIG unresponsive group. The reduction of the HDL-cholesterol levels by IVIG was more significant in the unresponsive group (P=0.02). Conclusion : A more severe and prolonged inflammatory response occurred in the IVIG unresponsive group at an early stage, and this finding can be detected by such inflammatory parameters as the neutrophil count and the CRP and HDL-cholesterol levels after IVIG infusion.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.148-156
• /
• 2015

In this study the differences in the sample size and sample input changes as characteristics of bio-oil oak(Quercus variabilis), the oak 0.5~2.0 mm of the oak weighing 300~900g was processed into bio-oil via fast pyrolysis for 1.64 seconds. In this study, the physico-chemical properties of biooil using oak were investigated. Fast pyrolysis was adopted to increase the bio-oil yield from raw material. Although the differences in sample size and sample input changes in the yield of pyrolysis products were not significantly noticeable, increases in the yield of bio-oil accounted for approximately 60.3 to 62.1%, in the order of non-condensed gas, and biochar. When the primary bio-oil obtained by the condensation of the cooling tube and the seconary bio-oil obtained from the electric dust collector were measured separately, the yield of primary bio-oil was twice as higher than that of the secondary bio-oil. However, HHV (Higher Heating Value) of the secondary bio-oil was approximately twice as higher than that of the primary bio-oil by up to 5,602 kcal/kg. The water content of the primary bio-oil was more than 20% of the moisture content of the secondary bio-oil, which was 10% or less. In addition, the result of the elemental analysis regarding the secondary bio-oil, its primary carbon content was higher than that of the primary bio-oil, and since the oxygen content is low, the water content as well as elemental composition are believed to have an effect on the calorific value. The higher the storage temperature or the longer the storage period, the degree of the viscosity of the secondary bio-oil was higher than that of the primary bio-oil. This can be the attributed to the chemical bond between the polymeric bio-oil that forms during the storage period.

• Clinical and Experimental Pediatrics
• /
• v.48 no.2
• /
• pp.197-203
• /
• 2005

Purpose : Changes in metalloproteinases(MMP) activity have been demonstrated in several disease states, including rheumatoid arthritis and tumor metastasis. More importantly, increased myocardial MMP activity has been reported to occur in both clinical and experimental forms of dilated cardiomyopathy. There was no report about MMP in adriamycin(ADR)-induced cardiomyopathy. The purpose of this study was to investigate gene expression of MMP and tissue inhibitor of metalloproteinases(TIMP) in ADR-induced cardiomyopathy and clarify the relationship between MMP and cytokines. Methods : Male Sprague-Dawley rats were divided into two groups. The first group was control. The second group was given intraperitoneal injections of ADR(5 mg/kg) twice a week over two weeks. Serum concentrations of MMP, TIMP, interleukin(IL)-6 and tumor necrosis factor(TNF)-${\alpha}$ were measured. RNA extraction was performed from frozen rat hearts. Reverse transcription polymerase chain reaction(RT-PCR) was employed. cDNA Microarray analysis was performed by using a set of 5,184 sequence-verified rat cDNA clones. Results : Serum MMP and TIMP levels were not significantly different between the two groups. IL-6 was $36.8{\pm}2.8pg/mL$ and TNF-${\alpha}$ $2.2{\pm}2.7pg/mL$ in the ADR group. They were significantly higher than in the control group. Serum MMP correlated significantly with TNF-${\alpha}$(r=0.41, P<0.05). There was no gene expression of MMP, IL-6 or TNF-${\alpha}$ in the hearts of both groups. Gene expression of TIMP was significantly depressed in the hearts of the ADR group. Conclusion : These results suggested a potential role for TNF-${\alpha}$ in the regulation of extracellular matrix remodeling in ADR induced cardiomyopathy. Rapid screening of multiple decreased gene expression by DNA chip may be a useful diagnostic test to detect early cardiac injury before developing ADR induced cardiomyopathy.

• Korean Journal of Food Science and Technology
• /
• v.44 no.2
• /
• pp.228-234
• /
• 2012

The varying characteristics between traditional and commercial soy sauce may be initiated by raw materials and fermentation techniques for the production of $meju$ and $koji$. We examined properties regarding polysaccharides isolated from commercial soy sauce made by the $koji$ process (CSP-0) and Korean traditional soy sauce made by the $meju$ process (KTSP-0) as well as their immuno-stimulating activities. KTSP-0 had rhamnogalacturonan II (RG-II) including 1.1% of unusual monosaccharides 3-deoxy-D-$manno$-2-octulosonic acid (KDO). Anti-complementary activities of CSP-0 and KTSP- 0 were increased dose-dependently but KTSP-0 (64.7%) was higher than CSP-0 (56%) at $1,000{\mu}g/mL$. C3 activation products were identified by crossed immuno-electrophoresis. CSP-0 caused complementary activations $via$ only classical pathway while KTSP-0 caused complementary activations $via$ both alternative and classical pathways. KTSP-0 significantly increased the secretion of interleukin (IL)-6 at $8-1,000{\mu}g/mL$ and IL-12 at $40{\mu}g/mL$ on macrophages. The results suggest that the immuno-stimulating activity of KTSP-0 is greater than that of CSP-0 from anti-complementary activity.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.716-723
• /
• 1995

The fucoidan purified from Korean brown seaweed, Ecklonia stolonifera was characterized on molecular structure and blood anticoagulant activities. Extraction was conducted at $100^{\circ}C$ with water and repeated twice. The crude fucodian was 151.1g out of 20.0 kg of Ecklonia stolonifera. The Fucoidan-1, which was purified from crude fucoidan using calcium chloride and cetyl pyridium chloride (CPC), was 35.2% against crude fucoidan. Fucoidan-5 was obtained approximately 28.1% from Fucoidan-1 through DEAE-Toyopearl 650 M ion-exchange column chromatography and showed one band by cellulose acetate electrophoresis. The molecular weight of Fucoidan-5 was estimated to be about 21,000∼23,000 dalton by Sephacryl S-300 gel filtration chromatography. Fucoidan-5 consists of 35.7% of fucose and 4.3% of galactose and the molar ratio of fucose and sulfate was about one to one. IR spectrum of Fucoidan-5 showed absorption at $1240\;cm^{-1}\;and\;850\;cm^{-1}$ and specific rotation value, $[\alpha]$, was $[\alpha]$. These results suggests that the sulfate maybe bind at $C_{4}$ carbon on ${\alpha}-L-fucose$. Gas chromatograph of methyl alditol acetate revealed that Fucoidan-5 is a fucose containing sulfated polysaccharide with $({\alpha}l-2)\;or\;({\alpha}l-2)$ glycosidic linkage. Anti-thrombin activity of the Fucoidan-5 was estimated as 1.4 time stronger than heparin. From above results, the purification methods using CPC and ion exchange chromatography is effective tools for obtaining highly purified fucoidan from Gompi, Ecklonia stolonifera.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.333-340
• /
• 2011

Purpose: The aim of this study was to study the effect of hydroxyapatite (HA) coating crystallinity on the proliferation and differentiation of human osteosarcoma cells. Materials and methods: Surface roughness of the titanium disks increased by anodizing treatment and then HA was coated using ion beam-assisted deposition (IBAD). HA coating was crystallized by heat-treated at different temperature ($100^{\circ}C$, $300^{\circ}C$, $500^{\circ}C$, $800^{\circ}C$). According to the temperature, disks were divided into four groups (HA100, HA300, HA500, HA800). With the temperature, crystallinity of the HA coating was different. Anodized disks were used as control group. The physical properties of the disk surface were evaluated by surface roughness tests, XRD tests and SEM. The effect of the crystallinity of HA coating on HOS cells was studied in proliferation and differentiation. HOS cells were cultured on the disks and evaluated after 1, 3, 5, and 7 days. Growth and differentiation kinetics were subsequently investigated by evaluating cell proliferation and alkaline phosphatase activity. Results: Regardless of the heat-treated temperature, there is no difference on the surface roughness. Crystallinity of the HA was appeared in the groups of HA500, HA800. HOS cells proliferation, ALP activity were higher in HA500 and HA800 group than HA100 and HA300. Conclusion: Within the results of this limited study, heat treatment at $500^{\circ}C$ of HA coating produced by IBAD has shown greater effect on proliferation and differentiation of HOS cells. It is considered that further in vivo study will be necessary.

• Korean Journal of Environmental Biology
• /
• v.27 no.1
• /
• pp.66-72
• /
• 2009

Diabetic Retinopathy (DR) is a leading cause of blindness among adults in the western countries. Hyperglycemia is a condition, that induces apoptotic cell death in a variety of cell types in diabetes, but the mechanism remains unclear. The aim of the study is to understand the effects of high Glucose on Human Retinal Endothelial Cells. Retinal endothelial cells were cultured in Iscove's Modified Dulbecco's Medium (IMDM) containing 5, 25 and 50 mM Glucose, incubated for 24, 36 and 48 hours in humidified 5 % CO$_2$ incubator at 37$^{\circ}C$. Human Retinal Endothelial Cell Line (HREC) were characterized for morphology with different treatment by phase contrast microscopic analysis. Number of dead and viable cells was counted by trypan blue exclusion and supported by MTT assay. The intracellular Hydrogen peroxide (H$_2$O$_2$), a Reactive Oxygen Species (ROS) generation in high glucose conditions was assessed by FOX II assay and apoptosis by caspase-3 assay. The high glucose treated cells undergoing DNA fragmentation was witnessed by Agarose gel electrophoresis. We found that the cells incubated with 25 and 50 mM glucose containing medium for 48 hours altered the morphology of the cell, induced apoptosis and DNA fragmentation. The dead cell number were high in 25 and 50 mM when compared to the cells incubated with 5 mM glucose for 24, 36, and 48 hours. Also, the H$_2$O$_2$ levels and the activity of caspase-3 were increased in high glucose treated cells. Conclusions/interpretation: Our results demonstrated that elevated glucose induces apoptosis in cultured HREC. The hyperglycemia-induced increase in apoptosis may be dependent on caspase activation. The association between ROS generation and caspase-3 activation on high glucose treated cells is yet to be investigated.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.318-330
• /
• 2009

A high heat flux test facility using a graphite heating panel was constructed and is presently in operation at Korea Atomic Energy Research Institute, which is called KoHLT-1. Its major purpose is to carry out a thermal cycle test to verify the integrity of a HIP (hot isostatic pressing) bonded Be mockups which were fabricated for developing HIP joining technology to bond different metals, i.e., Be-to-CuCrZr and CuCrZr-to-SS316L, for the ITER (International Thermonuclear Experimental Reactor) first wall. The KoHLT-1 consists of a graphite heating panel, a box-type test chamber with water-cooling jackets, an electrical DC power supply, a water-cooling system, an evacuation system, an He gas system, and some diagnostics, which are equipped in an authorized laboratory with a special ventilation system for the Be treatment. The graphite heater is placed between two mockups, and the gap distance between the heater and the mockup is adjusted to $2{\sim}3\;mm$. We designed and fabricated several graphite heating panels to have various heating areas depending on the tested mockups, and to have the electrical resistances of $0.2{\sim}0.5$ ohms during high temperature operation. The heater is connected to an electrical DC power supply of 100 V/400 A. The heat flux is easily controlled by the pre-programmed control system which consists of a personal computer and a multi function module. The heat fluxes on the two mockups are deduced from the flow rate and the coolant inlet/out temperatures by a calorimetric method. We have carried out the thermal cycle tests of various Be mockups, and the reliability of the KoHLT-1 for long time operation at a high heat flux was verified, and its broad applicability is promising.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.609-625
• /
• 2022

Validation of satellite data products is critical for subsequent analysis that is based on the data. Particularly, performance of ocean color products in turbid and shallow near-land ocean areas has been questioned for long time for its difficulty that stems from the complex optical environment with varying distribution of water constituents. Furthermore, validation with ship-based or station-based measurements has also exhibited clear limitation in its spatial scale that is not compatible with that of satellite data. This study firstly performed validation of major GOCI-II products such as remote sensing reflectance, chlorophyll-a concentration, suspended particulate matter, and colored dissolved organic matter, using the in-situ measurements collected from ship-based field campaign. Secondly, this study also presents preliminary analysis on the use of drone images for product validation. Multispectral images were acquired from a MicaSense RedEdge camera onboard a UAV to compensate for the significant scale difference between the ship-based measurements and the satellite data. Variation of water radiance in terms of camera altitude was analyzed for future application of drone images for validation. Validation conducted with a limited number of samples showed that GOCI-II remote sensing reflectance at 555 nm is overestimated more than 30%, and chlorophyll-a and colored dissolved organic matter products exhibited little correlation with in-situ measurements. Suspended particulate matter showed moderate correlation with in-situ measurements (R²~0.6), with approximately 20% uncertainty.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.257-267
• /
• 2023

Purpose. The purpose of the study was to fabricate a prototype robotic simulator for dental education, to test whether it could simulate mandibular movements, and to assess the possibility of the stimulator responding to stimuli during dental practice. Materials and methods. A virtual simulator model was developed based on segmentation of the hard tissues using cone-beam computed tomography (CBCT) data. The simulator frame was 3D printed using polylactic acid (PLA) material, and dentiforms and silicone face skin were also inserted. Servo actuators were used to control the movements of the simulator, and the simulator's response to dental stimuli was created by pressure and water level sensors. A water level test was performed to determine the specific threshold of the water level sensor. The mandibular movements and mandibular range of motion of the simulator were tested through computer simulation and the actual model. Results. The prototype robotic simulator consisted of an operational unit, an upper body with an electric device, a head with a temporomandibular joint (TMJ) and dentiforms. The TMJ of the simulator was capable of driving two degrees of freedom, implementing rotational and translational movements. In the water level test, the specific threshold of the water level sensor was 10.35 ml. The mandibular range of motion of the simulator was 50 mm in both computer simulation and the actual model. Conclusion. Although further advancements are still required to improve its efficiency and stability, the upper-body prototype simulator has the potential to be useful in dental practice education.