Park, Su-Dong;Kim, Bong-Seo;Lee, Hee-Woong;Chung, Hyun-Woock
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2005.07a
/
pp.613-614
/
2005
재료의 상변태 현상을 규명하기 위한 목적으로 이용되는 전기저항 측정법은 "비열측정", "선팽창율 변화 측정"등의 주요 분석방법에 비해 상대적으로 우수한 정밀성과 편이성으로 많은 연구자들에 의해 이용되고 있다. 그러나 전기저항 측정법은 전기저항의 온도민감성, 크기효과(size effect) 등으로 인해 실험결과에 대한 폭넓은 응용과 해석에 제한을 받고 있다. 최근 전기저항 변화율을 미분한 "DVRC 측정법"을 통해 보다 정밀하게 상변태 현상을 규명하고자 하는 노력들이 진행 중에 있다. 본 연구에서는 Al-Mg합금을 대상으로 수행된 전기저항 측정결과와 DVRC측정결과를 비교 분석함으로서 미시적 상변태 해석을 위한 기초적 해석 자료를 도출하고자 하였다.
지구 물리학이나 의공학 분야등에서 이용되왔던 전기비저항 탐사법은 관심 영역에 전류 입력을 가한 후, 그에 대한 전압 응답을 측정하여 관심 영역 내의 전기비저항 분포를 규명하는 방법으로서 역해석 문제의 범주에 포함된다. 따라서 일반적인 역해석 문제가 지니고 있는 해의 존재성, 유일성, 그리고 측정 데이터에 대한 해의 연속적 의존성이라는 기본적 문제들을 가지게된다. 이러한 역해석 문제의 해결에는 정확한 정해석 풀이법과 효율적인 역해석 방법이 요구되어진다. 본 논문에서는 정해석 방법으로 유한요소법을, 역해석 방법으로는 전체 최적점을 발견할 가능성이 높은 유전 알고리즘을 최적화 방법으로 사용하였다. 기존의 역해석 문제의 해결책으로 제시되어왔던 기울기 방법에 기반한 결정론적 최적화 알고리즘들이 지니고 있는 국소해로의 수렴, 즉 단순한 전기비저항 분포의 불연속성 확인이라는 한정된 정보의 획득을 넘어서 실제 전기비저항 분포와 가장 가까운 분포는 전체 최적점 근처에서 발견될 수 있음을 보이고자 한다. 이러한 전기비저항 분포의 역해석적인 규명을 간단한 2차원 수치해석문제를 풀어보므로서 확인해본다.
Journal of the Korean Society for Nondestructive Testing
/
v.21
no.5
/
pp.532-541
/
2001
Developments of nondestructive evaluation techniques for reduction of strength or toughness by aging of material have been carried out, and the method using electrical resistivity is one of them. In this study, to examine the application of electrical resistivity to the evaluation of degradation of metallic alloy, ten different non-magnetic materials were selected as test materials. Electrical resistivities measured by DC two-point probe method and those measured by non-contact type eddy current method were compared with each other. In addition, to examine the application possibility of four-point probe technology in field, the electrical resistivities for 1Cr-lMo-0.25V steel measured by DC two-point probe method and four-point probe method were compared with each other Differences between two measured values for the 1Cr-1Mo-0.25V steel were 0.6%. Therefore, the four-point probe method can be applied to the estimation of the degradation of metallic alloy. ect.
Given that induced polarization (IP) and direct current (DC) resistivity surveys are similar in terms of data acquisition, most DC resistivity systems are equipped with a time-domain IP data acquisition function. In addition, the time-domain IP data include the DC resistivity values. As such, IP and DC resistivity data are intimately linked, and the inversion of IP data is a two-step process based on DC resistivity inversions. Nevertheless, IP surveys are rarely applied, in contrast to DC resistivity surveys, as proper inversion software is unavailable. In this study, through numerical modeling and inversion experiments, we analyze the problems with the conventional inverse mapping technique used to invert time-domain IP data. Furthermore, we propose a modified inverse mapping technique that can effectively suppress inversion artifacts. The performance of the technique is confirmed through inversions applied to synthetic IP data.
Setting time of cement-based materials can represent a developing strength in early-age mixture, and it can be used a significant parameter of high-performance concrete having various mix-proportions. Generally, initial and final setting time of concrete is measured by penetration resistance method that used a wet-sieving mortar mixture, therefore, it hardly represents the setting time of sound concrete including coarse aggregate. Recently, several nondestructive methods, such as ultrasonic velocity and impendence measurement, are proposed to evaluate the setting time of fresh concrete. This study attempts to measure an electrical resistivity using four-electrode method for evaluation of setting time in early-age cement-based materials. For this purpose, total 10 mixtures are prepared as different mix-proportions including chemical admixture. Based on the experimental results, two electrical parameters, such as initial electrical resistivity and rising time, are proposed to reflect a microstructure development by hydration of cement-based materials. As a result, proposed parameter is also discussed with the measured setting time by penetration resistance method.
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.60-60
/
1999
단결정 다이아몬드의 열전도도는 약 22W/cm.K로 열전도도가 가장 큰 물질로 알려져 있으며, 비저항은 10$\Omega$.cm 이상의 높은 값을 갖는다. 대부분 열전도도가 큰 것으로 알려진 물질들은 Cu, Ag 등과 같이 전자의 흐름에 의하여 열이 전도되기 때문에 큰 전기전도도를 함께 갖는 것일 일반적이다, 그러나, 다이아몬드는 빠른 phonon의 이동에 의하여 열전도가 이루어지므로 전기적으로 절연 특성을 갖으면서도 큰 열전도가 가능하다. 단결정 다이아몬드는 고방열 절연체로서 이상적인 물질 특성을 보여준다. 전기절연성을 갖는 열전도층으로 다이아몬드를 이용하기 위해서는 저가로 제조가 용이한 화학기상증착법을 이용하여야 한다. 화학기상증착법으로 제조된 다결정 다이아몬드 박막의 열전도도는 약 21W/cm.K로 여전히 매우 높은 값을 갖는 것으로 알려져 있지만, 비저항 값은 인위적으로 도핑을 전혀 하지 않은 상태에서도 106$\Omega$.cm 정도의 낮은 값을 갖는다. 전혀 도핑을 하지 않았음에도 전도성을 갖는 특이한 특성을 다결정 다이아몬드가 보여 주고 있으므로 이에 대한 연구는 주로 전기 전도성을 갖는 특이한 특성을 다결정 다이아몬드가 보여주고 있으므로 이에 대한 연구는 주로 전기전도성의 원인을 규명하는데 집중되고 있다. 아직 명확한 전도 기구는 제안되고 있지 못하지만 전도성의 원인은 수소와 관련이 있고 전도는 표면을 통하여 이루어진다는 것이다. 산(acid)을 이용하여 다결정 다이아몬드 박막을 세척하면 전기 전도성이 사라지고 높은 저항값을 갖는 박막을 얻게 되는데 박막을 세척하는 공정은 박막의 표면만을 변호시키므로 표면에 있던 전기전도층이 용액 처리를 통하여 제거되므로 전도성이 사라진다고 생각하는 것이다. 그러나, 본 연구에서는 두께가 두꺼울수록 저항값이 증가하는 것이 관찰되었고 기존의 측정방식인 수평적인 저항 측정법에 대하여 수직적 방향으로 저항을 측정하면 저항값이 1/2 정도 작게 측정되었다. 다결정 다이아몬드에서 표면을 통하여 전류가 흐른다면 박막의 두께에 따른 변화가 나타나지 않아야 하고 수직적인 전류 측정법이 오히려 더 큰 저항을 보여주어야 한다. 기존의 표면 전도 모델로는 설명되지 못하는 현상들이 관찰되었고 정확한 전기 전도 경로를 확인하기 위하여 전해 도금법으로 금속들이 석출되는 모습을 관찰하였다. 이 방법을 통하여 다결정 다이아몬드에서 전류는 결정입계를 통하여 전도됨을 알 수 있었다. 온도에 따른 다결정 다이아몬드의 전기전도도 변화를 관찰하였고 이로부터 활성화 에너지 값을 구할 수 있었다. 다결정 다이아몬드의 전도도는 온도에 따라서 0.049eV와 0.979eV의 두 개의 활성화 에너지를 갖는 구간으로 나뉘어졌다. 이로부터 다결정 다이아몬드에는 활성화 에너지 값이 다른 두 종류의 defect level이 형성되는 것으로 추정할 수 있고 이 낮은 defect level에 의하여 전도성을 갖는 것으로 생각된다.
Size distributions of rice flour measured by microscope, sieve, Coulter counter (electrozone) and aerodynamic (Aerosizer) methods were compared. Among the particle sizes measured by four methods, those by microscope and sieve were the smallest and the largest, respectively. Difference was found between the particle sizes measured by Coulter counter and aerodynamic methods.
Kim, Hak-Soo;Kwon, Dong-Jun;Wang, Zuo-Jia;Gu, Ga-Young;Kim, Dae-Sik;Lee, Chun-Soo;Park, Joung-Man
Composites Research
/
v.26
no.3
/
pp.201-206
/
2013
The electrical resistance measurement was investigated as a damage monitoring method. In this study, 0.5 wt% Carbon nanotube reinforced polypropylene (CNT/PP) composites were evaluated under compressive fatigue loading. The shape of specimens was $20^{\circ}$ curved round type. Compression strength and electrical resistance were measured at different sections of specimen during compression. The microcracks of CNT/PP composites were detected based on the changing ratio of electrical resistance. Micro-damage during compressive fatigue test could be detected by electrical resistance measurements. The reason is that the contact points of CNTs in composites decreased under fatigue loading. During compressive fatigue test, larger change of electrical resistance was detected at the microcrack sections. It was proved that microcracks could be detected by electrical resistance measurement under compression test, whereas the real delamination parts were consistent with the predicted results by electrical resistance measurement.
Resistivity method is a practical and effective geophysical technique to detect leakage zones in embankment dams. Generally, resistivity survey conducted along the crest assumes that the embankment dam has a 2D structure. However, the 3D topography of the embankment distorts significantly resistivity data measured on anywhere of the dam. This study evaluates the influence from 3D effects created by specific dam geometry and effects of water level fluctuations through the 3D finite element modeling technique. Also, a comparison between different locations of survey line are carried out, and topographic correction technique is developed for the resistivity data obtained along the embankment dam. Furthermore, using synthetic resistivity data for an embankment dam model with leakage zone, detectability of leakage zones is estimated through 2.5D inversion.
Journal of the Institute of Electronics and Information Engineers
/
v.53
no.4
/
pp.117-128
/
2016
Installation of earth grounding system is essential to ensure personnel safety and correct operation of electrical equipment. Earth parameters, especially, soil resistivity has to be determined in designing an efficient earth grounding system. The most common applied technique to measure soil resistance is Wenner four-point method. Implementation of this method is expensive, time consuming and cumbersome as large set of measurements with variable electrode spacing are required to obtain a one dimensional resistivity plot. It is advantageous to have a method which is of low cost and provides fast measurements. In this perspective, electrical resistance tomography (ERT) is applied to estimate subsurface resistivity profile. Electrical resistance tomograms characterize the soil resistivity distribution based on the measurements from electrodes placed in the region of interest. The nonlinear ill-posed inverse problem is solved using iterated Gauss-Newton method with Tikhonov regularization. Through extensive numerical simulations, it is found that ERT offers promising performance in estimating the three-dimensional soil resistivity distribution.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.