• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.243-248
• /
• 2014

The permanent magnet linear synchronous motors facilitate maintenance, for it is structurally simple compare to rotating machine and has lots of advantage such as a precision control, high speed, high thrust and so on. However, it causes an increase of material cost because of structural characteristics that need to arranges the armature on the full length of transportation lines. Thus, in order to resolve this problem, we propose the discontinuous arrangement method of the armature but the edge always exists due to the structure when the armature is arranged discontinuously. Due to this edge, the cogging force is greatly generated and it causes thrust force ripple generating noise, vibration and decline of performance. Therefore, in this paper, we examined the characteristic of end edge according to the skew angle through 3-D numerical analysis using finite element method(FEM) and improved the operation characteristics.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1241-1246
• /
• 2013

Currently, The general transportation system arranges the armature on the full length of transportation lines. However, when this method is applied to the long distance transportation system, it causes an increase of material cost and manufacturing time. Thus, in order to resolve this problem, discontinuous arrangement method of the armature has been proposed. However, in the method of using stationary discontinuous armatures, mover can stop in the freewheeling section which is non-installations section when disturbance is generated and the mover can not be moved because armature control is impossible. Thus, the distance determination of armature is very important. Also, when the armature is arranged discontinuously the edge always exists due to the structure. Due to this edge, the cogging force is greatly generated during the entry and ejection of the mover to the armature. This cogging force causes thrust force ripple generating noise, vibration and decline of performance, it must be reduced. Therefore, in this paper, we examined the end edge cogging force generated by the stationary discontinuous armatures through 2-D numerical analysis using finite element method (FEM) and we figured out distance of armature for end edge cogging force minimization.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1675-1680
• /
• 2013

Recently, the permanent magnet linear synchronous motor as low noise, high speed and high thrust force transportation system has been proposed but this motor causes an increase of material cost because of its characteristic arranging the armature on the full length of transportation lines when this system is applied to the long distance transportation system. Therefore, we suggested discontinuous arrangement method of the armature to solve this problem. However, Detent force which causes thrust force ripple generating noise, vibration and decline of performance is generated when a mover pass between the armatures. Thus, in this paper, we examined characteristic of detent force to reduce the end edge effect according to the end edge teeth's height and auxiliary teeth and suggested the shape that can the most reduce the detent force.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1067-1068
• /
• 2007

최근 영구자석 선형 동기 전동기(PMSLM)는 이동 장치로써 많은 분야에 사용되고 있다. 영구자석 선형 동기 전동기는 구조적으로 간단하며 고속화 고추력화 등의 많은 장점을 가지고 있다. 그러나 단 1차형 영구자석 선형 동기 전동기는 매우 큰 디텐트력을 지니고 있어 추력 맥동의 원인이 되며, 이는 소음과 진동을 발생시킨다. 단 1차형 영구자석 선형 동기 전동기의 디텐트력은 전기자 내부의 치와 영구자석 사이에 작용하는 힘과 전기자 양 단부와 영구자석 사이에서 작용하는 힘의 합으로 표현된다. 본 논문에서는 코깅력을 줄이기 위한 방법으로 영구자석의 극 수와 전기자의 슬롯 수의 비를 변경한 새로운 구조의 단1차형 영구자석 선형 동기 전동기(PMLSM)를 제안하였고, 단부력을 줄이기 위하여 전기자 양 단부에 전기자 길이 조정법과 챔퍼링 법을 사용하였고, 반응표면법과 (($1+{\lambda}$) evolution strategy)[14]을 이용하여 최적화를 수행하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.613-619
• /
• 2010

The stationary discontinuous armatures that are used in permanent magnet linear synchronous motors (PM-LSMs) have been proposed as a driving source for transportation systems. However, the stationary discontinuous armature PM-LSM contains the outlet edges which always exist as a result of the discontinuous arrangement of the armature. For this reason, the outlet edge cogging force generated between the armature's core and the mover's permanent magnet. This paper contemplated the outlet cogging for ceaccording to 2-D numerical analysis by FEM. We installed the auxiliary pole for in order to minimize the outlet cogging force.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.306-308
• /
• 2000

부분여자된 영구자석형 선형동기전동기(PMLSM)의 단부효과를 고려한 특성을 나타낸다. 선형동기전동기의 고효율 운전을 위하여 전기자 권선을 가동자의 위치별 부분여자하였으며, 이와 더불어 양단부의 제한된 자석길이에 의한 단부효과를 나타낸다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.979-980
• /
• 2011

영구자석 선형 동기 전동기(Permanent Magnet Linear Synchronous Motor)는 구조적으로 간단하며 고속화 고추력화 등의 많은 장점을 가지고 있지만 전기자 권선부의 슬롯-치 구조로 인한 코깅력과 단부효과에 의한 코깅력이 발생한다. 이는 추력 맥동의 원인이 되며, 소음과 진동을 발생시킨다. 따라서, 본 연구에서는 전기자를 분산배치할 경우 필연적으로 생기는 단부에 의한 코깅력을 저감하기 위해 기존의 전기자 끝단에 설치한 보조치를 응용하여 계단형 형상을 가진 보조치의 설치를 제안하였다.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.101-103
• /
• 2007

최근 영구자석 선형 동기 전동기(PMSLM)는 이동 장치로써 많은 분야에 사용되고 있다. 영구자석 선형 동기 전동기는 구조적으로 간단하며 고속화 고추력화 등의 많은 장점을 가지고 있다. 그러나 단 1차형 영구자석 선형 동기 전동기는 매우 큰 디텐트력을 지니고 있어 추력 맥동의 원인이 되며, 이는 소음과 진동을 발생시킨다. 단 1차형 영구자석 선형 동기 전동기의 디텐트력은 전기자 내부의 치와 영구자석 사이에 작용하는 힘과 전기자 양 단부와 영구자석 사이에서 작용하는 힘의 합으로 표현된다. 본 논문에서는 코킹력이 획기적으로 감소한 9극 10슬롯 모델의 단부력을 줄이기 위한 방법으로 양 단부에 전기자 길이 조정법과 챔퍼링 법을 사용하였고, 반응표면법과 ($(1+{\lambda})$ evolution strategy)을 이용하여 최적화를 수행하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.889-895
• /
• 2011

PMLSM is structurally simple and it have a lot of merits such high speed, high thrust force etc., but cogging force by slot-teeth structure of armature and cogging force by outlet edge effect occurs. This is the cause of thrust force ripple and generate the noise and vibration. Therefore, in this paper we proposed installation of an auxiliary pole to mover of the PMLSM in order to decrease cogging force by the outlet edge which came necessarily into being discontinuous arrangement of the armature. Also, outlet edge cogging force designed a form of the auxiliary pole which the minimum became, and we compared a outlet edge cogging force characteristic along a winding method of an armature as we used 2-D of finite element analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1067-1072
• /
• 2012

Recently, linear motors have been widely researched and have been increasingly used in various industrial applications. Especially, permanent magnet linear synchronous motors(PMLSMs) have been getting the spotlight in the transportation system. A PMLSM is structurally simple and has a lot of merits such as high speed, high thrust force, etc. However, in case of a long stator system which arranges armature to the full length of transportation lines, a PMLSM has some disadvantages such as the material cost increase and long manufacturing time. Hence, in order to overcome these problems, the PMLSM with stationary discontinuous armature structure and concentrated windings was proposed. However, this method occurs undesirable cogging force by outlet edge effect. The cogging force causes thrust force ripples and generates noise and vibration. Therefore, in this paper, we proposed installation method of auxiliary pole PMLSM with concentrated winding applying bifurcating in order to reduce cogging force by the outlet edge when the armature is placed in a discontinuous arrangement. Also, we have examined characteristics of outlet edge cogging force using 2-D finite element analysis(FEA).