• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.447-453
• /
• 2003

연구지역은 경남 양산시 상북면 삼삼리 일원으로 양산단층과 인접하며 급한 경사의 자연사면으로 이루어져 있다. 수치지형자료를 이용하여 고도값을 갖는 자료층을 추출한 후 10m$\times$10m 크기의 격자별로 DEM으로 변환하고, 이로부터 단위 격자의 경사도, 경사방향도, 음영도를 작성하고 흐름분배 알고리즘을 이용하여 설정된 격자별로 상부사면의 기여면적과 습윤지수를 산정하였다. 높은 습윤지수를 보이는 지역은 북서-남동 방향의 선형구조로 나타나며, 국소지역의 전단단열 특성과 일치한다. 한편 연구지역에서 전기비저항 탐사를 실시하여 높은 습윤지수를 나타내는 지역과 저비저항 이상대의 분포를 비교한 결과 습윤지수가 높은 지역은 모두 낮은 전기비저항 이상대로 관찰된다. 즉 습윤지수는 암석의 화학적 풍화를 수반하는 파쇄대의 분포와 일치하며 이를 토대로 국소지역에서 파쇄대의 예측과 암석의 안정성을 예측하는 방법으로 이용될 수 있다.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.120-128
• /
• 2022

There are 17,000 reservoir dams in Korea, of which more than 85% were built over 50 years ago. Old embankment dams are weakened by internal erosion and suffusion phenomena due to preferential leakage paths and this ongoing weakening can cause their failure. Therefore, early warning associated with leakage in an embankment dam is crucial to prevent its failure. An electrical resistivity survey is a non-destructive, real-time and in-situ technique for detecting the development of leakage zones and general conditions of embankment dams. Because of its advantages, the electrical resistivity survey is widely used for reservoir safety inspections. However, the electrical resistivity survey is still not officially included in the precise safety inspection of reservoir dams because it cannot present a quantitative index of dam safety. In this study, we propose a method for calculating the leak index according to the water content evaluated from the electrical resistivity survey and/or induced polarization survey. Particularly, by proposing a quantitative leak index calculation method from monitoring surveys and independent surveys, we provide a theoretical basis for including electrical resistivity and induced polarization surveys as components of the precise safety inspection of reservoirs dams.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.155-162
• /
• 2006

An abnormal seepage flow, which is mainly caused by the piping, is one of the major reasons for embankment dam failure. A leakage detection is therefore a vital part of an embankment dam's monitoring. Resistivity method, which is an efficient tool to detect leakage zones, has been used all over the world for an embankment dam's monitoring. Although the resistivity method gives us very useful information about the leakage problem, there is no more quantitative interpretation than the low resistivity zones in the 2-dimensional resistivity section are regraded simply as the anomalous seepage zones. Recently, resistivity monitoring technique is applied for the detection of leakage zones. However, its interpretation still remains in the stage of presenting the resistivity ratio itself. An increased seepage flow increases a porosity and an increasing porosity decreases the dam's stability. Therefore, the porosity is one of the major factors for an embankment dam's stability. Based on Archie's experimental formula, we try to evaluate a porosity distribution from the resistivity data which is obtained on the dam's crest. We also attempt to represent a procedure to evaluate a safety index of the embankment dam from the resistivity monitoring data.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.1 no.1
• /
• pp.107-114
• /
• 1998

Purpose: The purpose of our study is to provide useful information for me-asurement methods of childhood obesity and to provide clinical significance of bioelectrical impedance analysis. Methods: We measured height, weight, waist to hip ratio, skinfold thickness and bioelectrical impedance from 206 elementary students in Kwangju from May to July 1997. Results: In males; 1) There were statistically high correlations between tri-ceps skinfold thickness and body mass index (BMI), percentage of body fat (%BF), weight, Rohler index (RI), total fat weight (TFW), waist to hip (W/H) ratio, height, lean body mass (LBM) (all, p<0.001). 2) There were statistically high correlations between subscapular skinfold thickness and BMI, RI, weig-ht, %BF, TBW (all, p<0.001). 3) There were statistically high correlations between %BF and BMI, triceps skinfold thickness, RI, TFW, subscapular skinfold thickness, weight (all, p<0.001). In females; 4) There were statistically high correlations between triceps skinfold thickness and BMI, weight, LBM, height, %BF (all, p<0.001). 5) There were statistically significant correlations between subscapular skinfold thickness and BMI, weight, LBM, RI, height. 6) There were statistically high correlations between percentage of body fat and BMI, RI, triceps skinfold thickness. The percentage of body fat according to the bioelectrical impedance analysis highly correlated with that calculated by skinfold thickness in males (r＝0.57, p<0.01) and in females (r＝0.30, p<0.01). Conclusion: The results of our study suggests that bioelectrical impedance analysis is a useful method of estimating body fat in the childhood obesity.

• Geophysics and Geophysical Exploration
• /
• v.12 no.3
• /
• pp.239-245
• /
• 2009

To verify the reinforcing effect of grouting materials composed of colloid cement and ordinary portland cement on the water leakage region in a small scale dike, we performed a tubecasing method and applied surface electrical resistivity survey including electrical resistivity tomography (ERT) to find resistivity variation before and after grouting. Hydraulic conductivities after grouting show 10 times lower than those of before grouting. These variation indicates that the cement grout blocks the leakage pathway effectively. As the results of dipole-dipole resistivity survey along the dike, resistivity distribution after grouting did not represent noticeable spatial variation in time. Resistivity monitoring results at the dike with vertical electrical sounding (VES) showed that the region of decreasing apparent resistivity was occupied by the grout after grouting. Predicted resistivities from the inversion of ERT data well matched with results of VES at the same regions. From the ERT using check holes to inspect the effect of grouting, we could find that the ERT is quite effective to identify spatially the grout region in a dike.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.73-78
• /
• 2006

To verify reinforcing effect of grouting materials on the water leakage region in dike, we performed various hydraulic test and we also applied electric resistivity survey including electrical resistivity tomography(ERT) to see resistivity variation before and after grouting. As the results of dipole-dipole array survey along dike, resistivity distribution after grouting was without noticeable spatial variation. Long term resistivity monitoring results at dike with Schlumberger array electric resistivity survey showed that the decreasing region of apparent resistivity and one dimensional inversion results were the occupied region by grout after grouting. From the ERT using check holes to inspect the effect of grouting, we could find that the ERT is quite effective to evaluate spatially grout region in dike.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.179-184
• /
• 2008

Silt or clay alluvium fully saturated with water generally shows low resistivity. Sometimes it is believe that the low resistivity layer is considered as good aquifer but this makes problems in the development of groundwater. To overcome this problem, we adopted induced-polarization(IP) method with resistivity method. Laboratory experiments and resistivity/IP field surveys with non-polarization electrodes were conducted for the study. Laboratory experiments shows that the increase of clay contents in the sample mixed with sand and clay give low resistivity and high chargeability. We used this experiment results in the interpretation of resistivity/IP field data which were obtained in riverbank filtration. Finally, the layer which has low resistivity and chargeabilty would be regarded as a good aquifer for the development of groundwater intake.

• Journal of the Korean Geophysical Society
• /
• v.7 no.3
• /
• pp.171-183
• /
• 2004

Electrical resistivity survey is widely used to investigate the stability of center-core type fill dam against the seepage phenomenon. In this study, we analyze the resistivity information obtained on a earth fill dam and compare it with the geotechnical SPT result. The analysis shows that the zones showing low resistivity value generally have low N value. However, some zones with high resistivity pattern do not accompany the increase of N value, and even showing low N value. These results imply that the direct identification of resistivity value to the real status of the core material of fill dam is impossible, and a highly resistive zone may be in serious status due to the effect increasing the resistivity value by the piping condition. Therefore, multiple exploration should be planned to reduce the uncertainty in application of geophysical methods to dam safety evaluation.

• The Journal of Engineering Geology
• /
• v.31 no.2
• /
• pp.187-197
• /
• 2021

Clay mineral content of weathered zone is a key parameter for landslide studies. Electrical resistivity tomography is usually performed to delineate the geometry of complex landslides and to identify the sliding surface. In clay-bearing weathered zone, parallel resistivity Archie equation is employed to investigate the effect of conductivity added (resistivity reduced) by clay minerals of kaolinite and montmorillonite, which is dependent on their specific surface area and cation exchange capacities (CEC). A decrease of overall resistivity and apparent formation factor is observed with increasing pore-water resistivity, significantly in montmorillonite. Formation factor is found decreased with increasing porosity and decreasing cementation factor. Parallel Archie equation was applied to the electrical resistivity data from the test area (Sinjindo-ri, Taean-gun, Chungcheongnam-do, Korea) which experienced land creeping in the year of 2014. A panel test with varying clay-mineral contents provides the best fit section when the theoretical section constructed with the assumed contents approaches the field section, from which the clay-mineral content of the weathered zone is estimated to be approximately 10%. Resistivity interpretation schemes including the clay mineral contents for land creeping studies explored in this paper can be challenged more when porosity, saturation, and pore-water resistivity are provided and they are included in the numerical resistivity modeling.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.143-147
• /
• 2002

본 연구의 목적은 부산 동남부 해안지역의 대수층에서 염수화에 미치는 조건들을 파악하고 해수침투 범위를 추정하는데 있다. 이를 위하여 Tidal damping method와 SUTRA 모델링을 실시하고 대수층의 특성 및 염수화가능성을 파악하였으며, 모델링 결과의 타당성을 판단하기 위하여 전기비저항 탐사를 실시하였다. Tidal damping method에 의한 시간지연과 조석효율효과를 계산하여 대수층의 저류계수를 산출한 결과 시간지연 현상에 의한 방법이 적합하게 나타났다. SUTRA 모델링 결과, 건기인 5월에는 종분산 지수가 2.5m 일 때 500ppm의 TDS 등치선을 기준으로 해안에서 약 510m 내륙까지 해수의 영향을 받고 있는 것으로 나타났다. 그러나 우기인 7월에는 강수로부터 다량의 지하수 함양에 의한 지하수위 상승을 고려하여, 평균수리경사를 0.008로 설정한 조건에서는 500ppm의 TDS 등치선을 기준으로 해안에서 약 410m 내륙까지 해수의 영향을 받는 것으로 나타난다. 5월과 7월의 전기비저항 탐사결과를 비교하면 7월의 전기비저항 분포가 전반적으로 높게 나타났다. 그 이유는 6, 7월의 강수에 의한 지하수의 유입이 증가하여 침투된 염수의 농도가 다소 낮아졌기 때문이다.