• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.95.2-95.2
• /
• 2010

염료감응형 태양전지의 효율을 향상을 시키기 위하여, 이산화티타니아박막을 doctor-blade 방법으로 FTO 기판위에 15-16um 코팅을 한뒤, 다른 온도의 $400^{\circ}C-600^{\circ}C$ 범위에서, 소결을 하였다. 상대전극은 FTO 기판위에 5Ml의 Pt용액을 가지고, $450^{\circ}C$온도에서 제작을 하였다. 실험의 결과 이산화티타니아의 표면거칠기 및 입자사이즈의 소결의 형상에 따라 DSSC의 효율의 상관관계가 영향을 받았다. 표면의 형상은 AFM으로 측정을 하였으며, 표면의 단차가 RMS의 값이 7nm이하 일 때, 효율의 향상을 이루었다. 실험결과 $500^{\circ}C$ 이하일 때, 상대적으로 낮은 open circuit voltage를 이루었으며, 낮은 Fill-factor를 이루었다. $500^{\circ}C$이상의 온도에서는 상대적으로 높은 high circuit voltage와 높은 fill factor를 나타내었다. 실험결과 $500^{\circ}C$에서 소결된 전극을 가진 DSSC가 단락의 전압과 개방전류가 상호보완된 적정값을 가져 가장 개선된 FF와 Eff를 나타내었다. 이와 같은 특성은 이산화티타니아의 준위 모식도에서 설명이 될수 있고, 이산화티타니아의 최적의 necking 및 pore, 입자크기등이 제어될수 있음을 의미한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.2
• /
• pp.63-70
• /
• 2014

Design sensitivity analysis and topology design optimization for a piezoelectric crystal resonator are developed. The piezoelectric crystal resonator is deformed mechanically when subjected to electric charge on the electrodes, or vice versa. The Mindlin plate theory with higher-order interpolations along thickness direction is employed for analyzing the thickness-shear vibrations of the crystal resonator. Thin electrode plates are masked on the top and bottom layers of the crystal plate in order to enforce to vibrate it or detect electric signals. Although the electrode is very thin, its weight and shape could change the performance of the resonators. Thus, the design variables are the bulk material densities corresponding to the mass of masking electrode plates. An optimization problem is formulated to find the optimal topology of electrodes, maximizing the thickness-shear contribution of strain energy at the desired motion and restricting the allowable volume and area of masking plates. The necessary design gradients for the thickness-shear frequency(eigenvalue) and the corresponding mode shape(eigenvector) are computed very efficiently and accurately using the analytical design sensitivity analysis method using the eigenvector expansion concept. Through some demonstrative numerical examples, the design sensitivity analysis method is verified to be very efficient and accurate by comparing with the finite difference method. It is also observed that the optimal electrode design yields an improved mode shape and thickness-shear energy.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.264-273
• /
• 2015

Improvement of the radiation beam profile of a medical ultrasonic transducer has been researched in this paper. In order to improve the beam profile, a new transducer structure has been devised that includes both a shaded electrode and a multi-focus lens. For a linear sound source, the beam profile was investigated through finite element analysis, and then the optimal design of the devised structure was carried out by considering such performances as sidelobe level, focal range and beamwidth simultaneously. In the process, the optimal dimension of the devised structure was derived by using the ratio of the focal range to the minimum beamwidth as a performance index. As a result, the beam profile has been improved to have a lower sidelobe level at -20.2 dB and a consistent narrow beamwidth from 30 mm to 160 mm depth with the minimum beamwidth at 2.04 mm. Further, a prototype transducer was fabricated to have the devised structure, and its performance was measured and compared with the analysis results to confirm the validity of the devised transducer structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.624-627
• /
• 2002

A study on machining electrode for LEO(Light Emitted Diode) mold with shaped end-mill is presented. The electrode machining by shaped end-mill has been used for maximizing the productivity in manufacture of semiconductor mold. However, it has not been researched systematically for many difficulties such as the making of shaped end-mill, generation of tool path due to distinctive tool geometry, and so on. Tool path is generated on the shaped end-mill geometry and cutting force to provide accurate and efficient machining of electrode. The verification program can drive enhancement of productivity, selecting cutting conditions from experiment function of cutting force. Also, compensation of tooting and machina error can make the electrode accurate by modifying tool path. Therefore, the research on machining with shaped end-mill can contribute to enhancement of accuracy and productivity in building semiconductor mold.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.698-704
• /
• 2006

This paper presents an electrode shape design method for the multi-mode sensors that could deteict the selected structural multiple modes. The structure used for this study is an isotropic cantilever beam type with a PVDF (polyvinylidene fluoride) which is bonded onto the structure as a sensor. The shape optimization problem is solved by using Genetic Algorithm (GA) with an appropriate objective function. The performance of analytical optimal shape sensor is compared with that of experimental work. The results show that the, obtained electrode shape sensors have good performance to detect the multiple vibration modes simultaneously.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.776-777
• /
• 2015

본 논문에서는 송전급 전력계통 적용을 위한 축자계 방식의 전극 구조를 갖는 진공 인터럽터의 전자계 해석 및 설계에 대해서 기술하였다. 상대적으로 극간 거리가 먼 초고압 진공인터럽터의 전극 구조로 축자계 방식을 채택하였으며, 효과적인 아크 확산 면적을 확보하기 위하여 자계 해석을 통해 전극 사이즈를 선정하였다. 또한, 접지된 금속외함 내에서 진공 인터럽터의 절연을 확보하기 위하여 전계 해석을 통해 전극 및 쉴드 등의 형상 설계를 수행하였다. 본 논문에서는 72.5kV 40kA 정격의 진공 인터럽터의 설계를 위한 전자계 해석 결과를 실험결과와 비교하여 설계 기준의 타당성을 검증하였고, 국제표준인 IEC 62271-100의 시험 규격에 의한 차단시험을 통하여 설계된 진공 인터럽터의 성능을 검증하였다.

• Proceedings of the KWS Conference
• /
• 1999.05a
• /
• pp.189-192
• /
• 1999

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.293-293
• /
• 2008

• Electric Engineers Magazine
• /
• v.263 no.7
• /
• pp.28-35
• /
• 2004

접지 시스템의 계획은 접지전극 형상의 설계와 계통접지 방식에 따른 접지 시스템으로 구성하여야 하고 접지 또는 금속체간에 전위차가 발생하지 않도록 Bonding, 기술을 충분히 고려하여야 한다.<중략>

• Proceedings of the KWS Conference
• /
• 2001.10a
• /
• pp.187-189
• /
• 2001