• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.472-476
• /
• 1994

Phase transformation of PbO-precursor prepared from $Pb(NO_{3})_{2}$ by precipitation technique was observed by TG-DTA, XRD, FT-IR, and Raman spectral analysis. PbO-precursor was derived from an aqueous solution of $Pb(NO_{3})_{2}$ at $45^{\circ}C$ and pH of 9.0. The precipitate showed it to be the mixture of hydrous lead oxynitrate and lead hydroxynitrate. With increasing heat-treatment temperature ranging up to $560^{\circ}C$, the precursor changed to $3Pb(NO_{3})_{2}$ . 7Pb0, $Pb(NO_{3})_{2}$. 5Pb0 and PbO(litharge), in turn. Finally, it transformed to massicot form of PbO above $560^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.113-113
• /
• 2011

Cobalt oxide 박막은 gas sensor, electro-chromic 소자 그리고 energy storage 소자등 광범위한 분야에서 연구되고 있으며 sputtering, CVD 그리고 electrochemical deposition 를 포함한 다양한 방법으로 증착할 수 있다. 최근에는 원자층 증착 방법을 이용한 cobalt oxide박막 증착이 연구되었는데, cyclopentadienyl계열의 전구체와 ${\beta}$-diketonate계열의 전구체를 이용하였다. 하지만 전구체의 낮은 증기압으로 인해 낮은 growth rate (약 0.02~0.05 nm/cycle)을 보였다. 본 연구에서는 증기압이 높은 전구체인 CCTBA (dicobalt hexacarbonyl tert-butylacetylene) 를 선정하여 원자층 증착 공정의 growth rate를 향상시키고자 하였다. 반응기체로는 O3을 사용하여 cobalt oxide 박막을 증착하였다. 반응기체의 주입시간 및 공정온도를 달리하여 시편을 증착한 결과 $80^{\circ}C$에서 0.1 nm/cycle로 기존의 보고된 growth rate보다 높은 수치를 얻을 수 있었다. 또한 증착된 cobalt oxide 박막내 조성분석과 I-V 측정 등을 이용하여 물리적, 전기적 특성을 규명하였다

• Journal of the Korean Electrochemical Society
• /
• v.18 no.3
• /
• pp.107-114
• /
• 2015

Electrochemical fabrication of nanostructured Au surfaces has received increased attention. In the present work, electrochemical modification of Au surfaces for fabricating nanostructured Au surfaces in the absence of externally added precursors is presented, which is different to the previous methods utilizing electrochemical deposition of externally added precursors. Application of anodic potential at Au surfaces in phosphate buffers containing $Br^-$ resulted in the anodic dissolution of Au, which produced Au precursors at the electrode surfaces. The resulting Au precursors were further reduced at the surface to produce nanostructured Au structures. The effects of applied potential and time on the morphology of Au nanostructures were systematically examined, from which a unique backbone type Au nanostructures was produced. The backbone type Au nanostructures exhibited high surface-enhanced Raman activity. The present work would give insights into the formation of electrochemical fabrication of nanostructured Au surfaces.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.4
• /
• pp.191-197
• /
• 2013

The one of the cathode material, $Li(Ni_{0.5}Co_{0.2}Mn_{0.3})O_2$, was synthesized by the precursor, $Ni_{0.5}Co_{0.2}Mn_{0.3}(OH)_2$, from the co-precipitation method and the morphologies of the primary particle of precursors were flake and needle-shape by controlling the precipitation parameters. Identical powder properties, such as particle size, tap density, chemical composition, were obtained by same process of lithiation and heat-treatment. The relation between electrochemical performances of $Li(Ni_{0.5}Co_{0.2}Mn_{0.3})O_2$ and the primary particle morphology of precursors was analyzed by SEM, XRD and EELS. In the $Li(Ni_{0.5}Co_{0.2}Mn_{0.3})O_2$ cathode from the needle-shape precursor, the primary particle size was smaller than that from flake-shape precursor and high Li concentration at grain edge comparing grain center. The cycle and rate performances of the cathode from needle-shape precursor shows superior to those from flake-shape precursor, which might be attributed to low charge-transfer resistance by impedance measurement.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.570-572
• /
• 2006

본 연구에서는 Cu와 In 성분을 포함하는 메탄을 용액을 닥터 블레이딩 방법으로 코팅한 후 이를 Se 분위기에서 열처리하여 CIS 광흡순층을 제조하였다 $Cu(NO_3)_2,\;InCl_3$를 출발 물질로 선정하고, 이를 메탄을 용매에 녹여 전구체 용액을 만든 후 여기에 유기물 바인더 물질을 첨가하여 닥터 블레이드 코팅에 적합한 점도를 맞춘 후. 이를 Mo/glass 기판에 코팅하였다. 코팅된 Cu, In 함유 유기물 혼합체를 공기중에서 1차 열처리 후 Se 분위기에서 열처리하면 태양전지용 CIS 광흡수층을 얻게 된다 특히 본 연구에서는 전구체 합성, 유기물 첨가, 공기중 열처리 및 Se 열처리 각 단계에서 광흡수층 막의 형상, 결정구조, 화학조성의 변화과정을 분석하여 CIS 박막의 형성 과정을 고찰하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.227.2-227.2
• /
• 2015

세포를 부착하는 기술은 세포를 배양하기 위한 가장 기초적이며 중요한 기술이다. 세포 부착기술은 대상물과 세포 간의 다양한 생물학적, 물리화학적 연관 관계가 있으나 세포와 부착 대상물 간의 복잡한 상호작용 때문에 완벽히 예측하기는 어렵다. 우리는 이 연구에서 siloxane 성분을 포함하고 있는 전구체인 tetrakis(trimethylsilyloxy)silane과 hydro-carbon을 포함하고 있는 전구체인 cyclohexane을 혼합하여 플라즈마 중합 박막을 만들고 그 박막에서의 mouse embryonic fibroblast cells과 bovine aortic endothelial cell 부착의 정도를 확인하였다. 플라즈마 중합 박막을 제작하기 위해 capacitively coupled plasma chemical vapor deposition system을 사용하였고 carrier gas로는 Ar을 사용하였다. Plasma RF power는 13.56MHz 70W를 사용하였다. Bubbler에서 기화된 전구체를 포함하고 있는 Ar carrier gas가 process chamber에서 혼합되고 두 전구체의 비율을 조절하기 위해 carrier gas를 0 에서 150sccm으로 변화시켜 플라즈마 중합 박막을 제작하였다. 플라즈마 중합 박막의 화학적 조성은 Fourier transform infrared absorption spectroscopy와 X-ray photoelectron spectroscopy를 이용하여 측정하였고, 생물학적 세포 부착 정도는 현미경을 통해 관찰하였다. 또한, 물과 박막의 접촉각(Water contact angle)을 측정함으로써 본 박막과 세포 부착에서의 친, 소수성의 연관성을 확인하였다. Tetrakis(trimethylsilyloxy)silane를 전구체를 사용한 박막에서 세포 부착 억제 표면특성이 관찰되었고, 주입되는 cyclohexane 비율이 늘어날수록 세포부착 가능한 표면 특성을 보였다. 결과적으로, 전구체인 tetrakis(trimethylsilyloxy)silane와 cyclohexane의 비율을 조절함으로써 세포의 부착정도를 제어할 수 있음을 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.182-188
• /
• 2011

Polysilazane and polymethylsilazane based precursor films were deposited on Si-substrate by spin-coating, subsequently annealed at $150{\sim}850^{\circ}C$, and characterized. Structural analysis, shrink, compositional change, etch rate, and gap-filling were observed. Annealing the precursor films led to formation of spin-on dielectric films. C-containing precursor films showed that less loss of N, H, and C while less gain of O than that of C-free precursor films at $400^{\circ}C$, but more loss of N, H, and C while more gain of O at $850^{\circ}C$. Thus polysilazane based precursor films exhibited less reduction in thickness of 14.5% than silazane based one of 15.6% at $400^{\circ}C$ but more 37.4% than 19.4% at $850^{\circ}C$. FTIR indicated that C induced smaller amount of Si-O bond, non-uniform property, and lower resistance to chemical etching.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.593-599
• /
• 2023

Nickel oxide (NiO) nanoparticles were successfully synthesized by a simple liquid phase process for producing ceramics powder using a precursor impregnated with a nickel(II) nitrate hexahydrate aqueous solution in an industrial pulp. The microfibrile structure of the precursor impregnated with nickel nitrate hexahydrate aqueous solution was confirmed by scanning electron microscope (SEM), and the crystal structure and particle size of nickel oxide (NiO) particles produced as the heat treatment temperature of the precursor were analyzed by X-ray diffraction (XRD) and SEM. As a result, it was confirmed through XRD and SEM analysis that the temperature at which the organic material of the precursor is completely thermally decomposed was 495-500℃, and the size and crystallinity of the nickel oxide particles produced increased as the heat treatment temperature increased. The size of the nickel oxide particles obtained by heat treatment at 500-800℃ for 1 hour was 50-200 nm. It was confirmed by XRD and SEM analysis that a NiO crystal phase was formed at a heat treatment temperature of 380℃, only a single NiO phase existed until 800℃.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.143.2-143.2
• /
• 2000

• Clean Technology
• /
• v.19 no.1
• /
• pp.59-64
• /
• 2013

Pt/carbon Electrode catalysts for PEMFC were synthesized using colloidal method. PSA (platinum sulfite acid) was used as a Pt precursor and CPA (chloroplatinic acid) was also used to replace relatively expensive PSA. Electrode catalysts prepared using PSA showed Pt particle size less than 3.5 nm and Pt yield higher than 90% in 10~40 wt% Pt loading. Electrode catalysts prepared using CPA also showed Pt particle size less than 4.4 nm and Pt yield higher than 80% in 10~40 wt% Pt loading. The MEA (membrane electrode assembly) using 20 wt% Pt/VXC72 showed equivalent I-V curve comparing with commercial electrode catalyst in single cell test.