• Ceramist
• /
• v.3 no.1
• /
• pp.45-52
• /
• 2000

전자싸이클로트론공명플라즈마 화학기상증착법(ECR-PECVD)에 의한 Pt 및 $RuO_2$ 기판에서의 PZT 박막의 증착특성 및 전기적 특성을 조사하였다. $RuO_2$ 기판에서는 Pt 기판에 비하여 Pb-관련 이차상이 형성되기 쉬웠고, PZT 페로브스카이트 핵생성이 어려웠다. 하지만, $RuO_2$ 기판에서도 금속유기 원료기체의 정확한 유량조절(특히, $Pb(DPM)_2$ 유량)과 Ti-oxide 씨앗층의 도입을 통하여 $450^{\circ}C$의 비교적 낮은 증착온도에서 단일한페로브스카이트 박막 제조가 가능하였으며, $RuO_2$ 기판에서도 미세구조가 향상된 PZT 박막의 경우 $10^{-6}A/cm^2@100kV/cm$의 우수한 누설전류 특성을 나타내었다. 4 가지 전극배열의 PZT 커패시터들 중에서 $RuO_2//RuO_2$ 커패시터는 누설전류밀도가 $10^{-4}A/cm^2@100kV/cm$ 정도로 높았지만, 피로현상은 나타나지 않았다. 일방향 전계 (unipolar) 피로특성에서 나타난 polarization-shift 현상과 양방향 전계 (bipolar) 피로특성의 온도의존성 결과는 PZT 박막내 charged defect의 이동이 어려움을 나타내었다. Bipolar 신호에 의한 피로현상은 인가전계에 의한 분극반전 과정에서 Pt 계면에서 charged defect의 형성과 관련이 있는 것으로 판단되었다. 또한, 상하부 전극물질 이 다른 경우에는 상하부 계면의 charged defect 밀도에 차이가 생겨 내부전계가 형성되는 것으로 판단되었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.61-68
• /
• 2018

In this paper, we described about methods and results to verify the Tx/Rx beam characteristics of a planar active phased array antenna as using a near-field measurement. The near-field system can effectively measure multiple beams and predict the performance degradation due to the partial failure of individual elements. Also, it can accurately predict the EIRP relating to detection performance of the active phased array radar. We briefly described the near-field measurement method to verify the Tx/Rx beam characteristics, and then verified the effectiveness of measurement method by analyzing the measured results.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.3 no.1
• /
• pp.20-27
• /
• 1992

A synthesized isotropic pattern antenna can be realized by arrangeing $\lambda$/ 2 dipole along each x, y, z axis. The sleeve type $\lambda$/ 2 dipole antenna is used as a basic element for a proper impedance matching at feeding point and minimum mutual coupling effect between each element at 820 MHz - 895 MHz band. The total electric field intensity radiated from the designed isotropic pattern antenna is drived from the magnetic vector potential which is produced by each sleeve $\lambda$/ 2 dipole in the far field. This total electric field intensity is inversely proportional only to distance $\gamma$from the origin of coordinates, and pattern factor variation is less than 2.1dB. The measured value of total electric field variation depending on pattern factor is less then 2.8dB, and the difference between the calculated and measured value is 0.7dB.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.165-172
• /
• 2012

Integrated-optic asymmetric Mach-Zehnder interferometer at $1.3{\mu}m$ wavelength and segmented electrode structure were designed and fabricated as a sensing part for the electric-field measurement system. The device was simulated based on the BPM software and fabricated utilizing Ti-diffused $LiNbO_3$ channel optical waveguides and lumped-type electrodes. Almost half-maximum power transmission was observed for asymmetric interferometers with ${\pi}/2$ intrinsic phase difference. Expected experimental measurements were observed for 1KHz electrical signal bandwidth.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.59-65
• /
• 2022

In this paper, a digital active phased array antenna is briefly introduced and beam forming method for a dual-channel side-lobe blanking applied to blank the side-lobe of the main beam is described. Next, the antenna performance was verified from results of design and antenna near-field measurement for the antenna main beam and side-lobe blanking beam. Then, a single-channel side-lobe blanking beam forming method was proposed to reduce the number of channels than the existing system operating dual-channel side-lobe blanking beam and weight distribution for each element of the side-lobe blanking antenna was designed with the proposed method. Finally, the designed single-channel side-lobe blanking beam pattern and blanking ability were verified and compared with the dual-channel side-lobe blanking beam. In addition, by comparing/verifying the conventional dual-channel and the proposed single-channel side-lobe blanking beam patterns measured through the receiving near-field test of the digital active phased array antenna and their ability to blank side-lobe of the main beam, validity of the proposed method for forming single-channel side-lobe blanking beam was confirmed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.414-423
• /
• 2015

Array error analysis and correction of active array antenna are described in this paper. Array elements composed of radiator and TR(Transmit & Recive) module have error(magnitude and phase difference among array elements) which affects SLL(Side Lobe Level). Error affectedness level depends on ideal SLL according to antenna aperture weighting, number of array elements and antenna effective aperture. To satisfy required SLL, correction of array elements is necessary; adopted differently per errors, and weighted differently per shapes of antenna and required SLL. Errors of every individual element had been defined, performance of the antenna with or without error correction had been estimated and proved through near field test.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.128-134
• /
• 2012

The performance evaluation and fabrication of integrated-optic electric-field sensor utilizing $Ti:LiNbO_3$ asymmetric Mach-Zehnder intensity modulator with a push-pull lumped electrode and a plate-type probe antenna to measure an electric field strength is described. The modulator has a small device size of $46{\times}7{\times}1\;mm$ and operates at a wavelength $1.3{\mu}m$. The devices are simulated based on the BPM software and fabricated utilizing Ti-diffused $LiNbO_3$ channel optical waveguides. The minimum detectable electric field is 1.02 V/m and 6.91 V/m, corresponding to a dynamic range of ~35 dB and ~10 dB at the frequencies of 500 KHz and 5 MHz, respectively.

• Journal of Sensor Science and Technology
• /
• v.5 no.2
• /
• pp.9-14
• /
• 1996

We have fabricated the vacuum magnetic sensor with a lateral field emitter arrays constructed on n-Si substrate, and investigated its magnetic characteristics. The device consists of 100 field-emitter tips with a $10{\mu}m$ pitch, gate, and split-anodes which are laterally structured. The electron-emission characteristics from the emitter followed the Fowler-Nordheim tunnelling theory. The sensor has good linear characteristics and high sensitivity of 825 %/T.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.295-301
• /
• 1997

다양하고 방대한 양의 정보를 효과적으로 처리, 분배하는 멀티미디어 정보통신 시스템이 광신호에 의한 처리를 통해 구현되어갈 전망이다. 이를 위해 빛을 발생시키는 발광소자, 빛을 검출하는 소광소자, 광신호를 처리하는 광신호 처리소자 그리고 광신호를 전달해주는 광섬유 및 화상정보의 표시를 위한 표시소자 등이 중요한 요소기술이다. 이같은 소자의 제작에 있어 기존 물질로는 요구에 대한 대응이 어려워 보다 우수한 성능의 소재개발이 요구된다. 이에 대한 대체물질로 최근 유기물 또는 고분자가 각광을 받고 있으며, 이를 사용한 소자개발이 활발히 진행되고 있다. 이제까지 무기물로 달성하기 힘들었던 많은 기술들이 유기물로 쉽게 구현이 가능하게 되면 고성능의 소재 및 소자기술은 다가오느 정보화 시대를 더축 풍요롭게 하는데 크게 기여할 것이다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.3
• /
• pp.32-40
• /
• 1991

A modified transmission line model is proposed for input impedance analysis of a square microstip antenna with single-circularly-polarized. Alog-periodic arrangement with microstrip antenna (LPMA) which consists of 3 resonant element ($3\times1$) is designed for broadband operation ranging from 11.2 GHz to 12.4 GHz, based on this pro- posed model from transmission line model. Aplanar array ($3\times4$array), in which 4sets of the above LPMA are in the same plane, is fabricated for high gain X-band satellite communication antennas. The optimum spacing between each LPMA is determined using computer simulation for the minimum bariation of far field pattern and null. This $3\times4$array has a measured values of gain greater than 8dBi, VSWR les then 2.3, and bandwidth greater than 7% respectively.