• Title/Summary/Keyword: 전계강도

Search Result 234, Processing Time 0.023 seconds

A Study on Optimal ERP and Antenna HAAT for Transmission of the 8-VSB DTTB (8-VSB DTTB 송신을 위한 최적 ERP와 안테나 HAAT에 관한 연구)

  • 김재섭;임승우
    • Journal of the Korea Computer Industry Society
    • /
    • v.2 no.9
    • /
    • pp.1147-1154
    • /
    • 2001
  • In this paper, we make plans for facilities, the 8-VSB DTV transmission system, installed in the near future, based on presently NTSC TV operating it. First of all we estimate transmission power for analog NTSC, digital 8-VSB terrestrial broadcasting and the effective condition of optimal receiving power result from it. It's also to estimate optimal receiving condition by using Longley-Rice's Field Strength calculating method that is to guess a profile between transmitting station and many receiving points. The 8-VSB DTV Propagation aims to high-speed transmission rates of 19.39Mbps datum to enable HDTV(High Definition Television) at NTSC 6MHz bandwidth. First of all, an optimization of field strength between transmission station and receiver must deal with considerable. Because of these reasons, 8-VSB DTV transmission needs effective extension for NTSC TV service coverage. Finally we present the transmitting output that is expected in changing NTSC VHF to DTV UHF for maintaining the transmitting output of NTSC TV that is equal to 8-VSB DTV in service coverage.

  • PDF

컴퓨터 시스템에 의한 저온에서의 질소가스(G$N_2$)에 대한 방전특성측정

  • 이광식;주재현;이동인;김인식
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.8 no.4
    • /
    • pp.30-37
    • /
    • 1994
  • 본 연구는 전온하의 질소가스에서 구대 평판전극을 사용하여 온도변화([$0^{\circ}C$]~[$80^{\circ}C$]와 전극간 거리(d=1.0, 2.0, 3.0[mm])를 변환시켰 을 때의 방전트성을 연구하였다. 본 연구에서 얻은 중요한 결론은 다음과 같다. \circled1 온도가 저하함에 따라 절연파괴전압(VB)은 상승한다. \circled2 온도를 강하시킴에 따라 방전지속시간(t)이 길어진다. \circled3 전극의 불평등성이 클수록 절연파괴전압(VB)의 온도의존성이 커진다. \circled4 절연파괴 전계강도(EB)는 다음식으로 표현할 수 있다. 여기서, A, B 및 C는 상수이며 그 값은 다음표와 같다. EB=$AT^2$+BT+C(EB: 절연파괴 전계강도[kV/mm], T: 측정시의 온도[$^{\circ}C$]).

  • PDF

In-Flight Field Strength Measurement of KNDGPS (공역에서의 NDGPS 신호 전계강도 측정 연구)

  • Ahn, Jae-Hyung;Yoo, Byeong-Seon;Kang, Ja-Young
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.18 no.2
    • /
    • pp.1-8
    • /
    • 2010
  • In order to determine the possibility of using NDGPS signals for flight operations, in-flight measurements of signals transmitted from various ground reference stations(RS) were conducted along the air routes of South Korea. Signal strength and signal to noise ratio(SNR) data were collected along domestic flight routes and recorded with time. By using three-dimensional geographical position data of the aircraft, signal strength data of en-route position were calculated and used to obtain scatter-plot of signal strength. These results were used to outline the effective coverage and field strength hemispheres of the selected DGPS signals.

Three Dimensional Electric Field Analysis for 3-phase encapsulated Arrangement of GIS (3차원 전계해석법을 통한 초고압 GIS 상배치 구조에 관한 절연성능평가)

  • Yoon, J.H.;Jeong, S.Y.;Choi, J.W.;Kang, S.M.;Oh, I.S.;Im, S.S.
    • Proceedings of the KIEE Conference
    • /
    • 2003.10b
    • /
    • pp.60-62
    • /
    • 2003
  • 본 연구는, 초고압 GIS(Gas Insulated Switchgear)용 GCB(Gas Circuit Breaker)의 3상 배치구조를 설계 하기 위한 상간, 대지간의 절연성능을 평가하였다. 피임펄스 전압과 상용주파 전압인가시 상간, 대지간의 절연설계 기준과 비교하여 절연설계 안전율을 고려하여 설계에 적용하였다. 수치적 전계 해석법으로 3차원 전계 해석법과 2차원 축대칭 전계 해석법을 통해 전계 강도를 비교하였으며 3차원 전계 해석법으로는 경계 요소법(Boundary Element Method)을 사용하는 상용프로그램인 coulomb을 사용하였으며, 2차원 전계 해석법으로는 유한요소법(Finite Element Method)을 사용하는 Maxwell을 통해 절연성능 평가를 하였다. 마지막으로, 전계 해석을 통해 절연설계 기준에 적합한 상배치 구조 설계를 하였다.

  • PDF

The Analysis for Electric Field Strength on the Ground Level from DMB Transponder in Stratosphere HAPS (성층권 고공항등체 DMB 트랜스폰더의 지표면 수신전계 강도 분석)

  • Kuk Jay-Il;Chinn Yong-Ok
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.1A
    • /
    • pp.16-22
    • /
    • 2006
  • This papers described with the analysis for electric Field strength on ground level transmitted from DMB transponder in stratosphere HAPS. It is compare with horizontal propagated ground wave. Resultly we confirm the equal strength a electric field on ground level between hish altitude vertical propagated wave and horizontal ground wave, also, is only 1W compare with terrestrial facility as transmitted output power for the DMB transponder in stratosphere HAPS. It is corresponding to 1Kw as same power value in ground propagated wave. Lastly it is new material wave source and also we concluding remarks as ubiquitous communication networking media.

The Susceptibility of LNA(Low Noise Amplifier) Due To Front-Door Coupling Under Narrow-Band High Power Electromagnetic Wave (안테나에 커플링되는 협대역 고출력 전자기파에 대한 저잡음 증폭기의 민감성 분석)

  • Hwang, Sun-Mook;Huh, Chang-Su
    • Journal of IKEEE
    • /
    • v.19 no.3
    • /
    • pp.440-446
    • /
    • 2015
  • This study has examined susceptibility of LNA(Low Noise Amplifier) due to Front-Door Coupling under Narrow-Band high power electromagnetic wave. M/DFR(Malfunction/Destruction Failure Rate) was measured to investigate the diagnostic of IC test. In addition, decapsulation analysis was used to understand the inside of the chip state in LNA devices. The experiments is employed as an open-ended waveguide to study the destruction effects of LNA using a 2.45 GHz Magnetron as a high power electromagnetic wave. The susceptibility level of LNA was assessed by electric field strength, and its failure modes were observed. The malfunction of LNA device has showed as the type of self-reset and power-reset. The electric field strength of malfunction threshold is 524 V/m and 1150 V/m respectively. Also, he electric field of destruction threshold is 1530 V/m. Three types of damaged LNA were observed by decapsulation analysis: component, onchipwire, and bondwire destruction. Based on these results, the susceptibility of the LNA can be applied to a database to help elucidate the effects of microwaves on electronic equipment.

Frequency Compatibility of FH Spread spectrum Communications in TV Channels (FH대역확산통신과 TV채널의 주파수 양립성에 관한 연구)

  • 박창일;조형래;이명수;강창언
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.14 no.1
    • /
    • pp.84-92
    • /
    • 1989
  • The purpose of this paper is to demonstrate the effect of a FH spread spectrum communication interference in TV channels and frequency compatibility in 30-88 MHz frequency band. To calculate this interferece, the strength of electric field of TV signals is derived as a function of distance between TV transmitter and receiver. An interference model is established based upon thefield strength by using the relation between the transmitted power of FH spread spectrum communications and the distance between the TV image signals, which makes TV screen a cceptble, Simultaneous transmission of FH sprea spectrum signals and TV signals is shown to be feasible, as far as the interference level is lower than the TV image signal level by 23.5dBm. As a result of frequency analysis and experiment, the FH spread spectrum communication can be used together with TV channels.

  • PDF

Optimum Configuration of Single Frequency Network DMB to enhance the QoS and Service coverage (QoS 개선과 서비스 커버리지 확장을 위한 단일 주파수망 지상파 DMB 최적화 배치)

  • Cho, Young-Hun;Won, Chung-Ho;Seo, Jong-Soo
    • Journal of Broadcast Engineering
    • /
    • v.19 no.4
    • /
    • pp.439-452
    • /
    • 2014
  • This paper suggests the method to extend service area by using the transmit offset delay in T-DMB single frequency network (SFN). In general, synchronization of the transmit time of all site can be done by using the reference clock of GPS, which dose not reflect the details geographical characteristics and transmit specifications of each site. Applying the site-specific transmit offset delay, we could extend the service area of SFN T-DMB. Applying the transmit offset delay, it is found that the signal quality in the region of weak receive field strength was improved and upto 4~8 km service area expansion was achieved by satisfying the minimum field strength ($45dB{\mu}V/m$) recommended by the Korea Communications Commission (KCC). Site-specific offset delay was calculated considering the geographic service area characteristics, distribution of electric field strength between neighboring sites and site-specific service target area. Experiments were carried out in order to analyze impact of calculated offset delay on the T-DMB SFN and also to confirm that the offset delay extends T-DMB service coverage. The experiment was done in metropolitan T-DMB service areas.

A Study on the Technical Regulation of Weak Electric Filed Strength Radio Equipment about 8.2Hz Frequency Band (8.2MHz 대역 미약 전계강도 무선기기의 출력기준에 관한 연구)

  • Kim, Sun-Youb;Ra, Yoo-Chan
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.13 no.12
    • /
    • pp.2498-2504
    • /
    • 2009
  • This paper compared the output limit value of the Korean weak electric field strength wireless device in the 8.2MHz band with the standard values of foreign countries. Through this, the study confirmed that the Korean regulation was lower by about 10-20dB than those of the USA or Europe. In order to prove this, the study measured outputs by entrusting the 8.2MHz EAS system to two measuring companies. As a result of these measurements, electric field strengths were shown to be $70.6dB{\mu}V/m$ and $68.3dB{\mu}V/m$ respectively, and these values were confirmed to exceed the current Korean standard of $59.8dB{\mu}V/m$. Accordingly, it is deemed necessary to review the specifications of the Korean standard in the 8.2MHz band.