• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.3
• /
• pp.147-155
• /
• 2022

The accumulated ice and snow during the operation of aircraft and railway vehicles can degrade aerodynamic performance or damage the major components of vehicles. Therefore, it is crucial to predict the temporal growth of ice for operational safety. Numerical simulation of ice is widely used owing to the fact that it is economically cheaper and free from similarity problems compared to experimental methods. However, numerical simulation of ice generally divides the analysis into multi-step and assumes the quasi-steady assumption that considers every time step as steady state. Although this method enables efficient analysis, it has a disadvantage in that it cannot track continuous ice evolution. The purpose of this study is to construct a surrogate model that can predict the temporal evolution of ice shape using reduced-order modeling. Reduced-order modeling technique was validated for various ice shape generated under 100 different icing conditions, and the effect of the number of training data and the icing conditions on the prediction error of model was analyzed.

• Journal of the Korean Society of Visualization
• /
• v.15 no.2
• /
• pp.59-67
• /
• 2017

To verify floatability of ABB (Air bubble barrier), we compared bubble swarm behavior with and without the air-driven ejector. Experiment was conducted using the fabricated air-driven ejector with 5 mm nozzle on the bottom of 1 m3 water tank. Reynolds number of air in the nozzle was ranged 1766-13248. We analyzed data with statistical method using image processing, particle mage velocimetry (PIV) and proper orthogonal decomposition (POD) analysis. As a result of POD analysis, there was no significant eigenmode in bubbly flow generated from the ejector. It means that more complex turbulent flows were formed by the ejector, thereby (1) making bubbles finer, (2) promoting three-dimensional energy transfer between bubble and water, and (3) making evenly distributed velocity profile of water. It is concluded that the air-driven ejector could enhance the performance of ABB.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.281-281
• /
• 2022

바닥에서 생성되는 난류는 순간적으로 강한 모멘텀을 바닥에 전달함과 동시에 바닥에 있는 입자를 움직이게 한다. 경계층 내 난류 운동에 대한 분석은 다양한 유사 이송 문제를 이해하기 위해 필수적이며 이에 따라 많은 선행 연구들은 실험실 실험을 통해 해당 연구를 수행하였다. 본 연구에서는 선행 연구에서 사용하지 못했던 진보된 실험 방법을 활용하여 바닥 경계층 내의 난류 운동에 대해 확인하고 해당 운동에 의해 관성 입자의 움직임이 어떻게 발생하는지에 대하여 물리적으로 설명하고자 한다. 다양한 흐름 조건에서 3가지의 입경 크기를 가지는 모래 입자를 가지고 실험을 수행하였으며, 실험 조건별 고해상도 유속장 및 관성 입자의 움직임은 3차원 입자 영상 유속계 (Particle Image Velocimetry; 이하 PIV)와 입자 추적 유속계 (Particle Tracking Velocimetry; 이하 PTV)를 동시에 적용하여 파악하였다. 취득된 3차원 유속장과 입자 궤적을 기반으로 실험 조건별 흐름 및 입자 거동 특성에 대해 분석하였으며, 관성 입자의 움직임을 발생시키는 3차원 난류 운동은 측정된 유속장에서 산정한 Q-criterion 값을 기반으로 도식화하였다. 측정값 내에는 난류 운동에 대한 정보와 더불어 잡음이 포함되어 있으므로 이를 제거하고자 적합 직교 분해 (Proper Orthogonal Decomposition; 이하 POD) 방법을 적용하였다. 그리고 POD로 추출한 유속장을 통해 바닥면 부근에 존재하는 헤어핀 와류 운동 혹은 와류 묶음과 같은 난류 고유 구조를 파악하였다. 해당 와류 운동들의 3차원 난류 특성을 확인하고자 비등방성 불변 지도(anisotropy invariant map)를 활용하였으며 경계층 내부에서 난류의 형태가 흐름 방향으로 늘어진 럭비공 형태임을 확인하였다. 마지막으로, 입자의 움직임을 발생시키는 난류 이벤트를 결정하고자 사방구 분석 (Quadrant analysis) 기법을 적용하였으며 흐름 조건별로 입자를 움직이게 하는 난류 이벤트는 달라짐을 확인하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.37-44
• /
• 2018

To understand the dynamic characteristics of the vessel with hydroelastic response, it is very important to estimate the dynamic modal parameters such as mode shapes, natural frequency, and damping ratio. These dynamic modal parameters of full scale ship are a priori unknowns, hence to be estimated directly based upon the full scale measurement data. In this paper, dynamic modal parameters were extracted by signal processing of acceleration and strain data measured from a large container ship whose loading capacity is 9400TEU. The mode shapes of the vibrating hull were identified using the proper orthogonal decomposition and the vibration response of hull was decomposed into its modal magnitudes. Natural frequencies of specific modes were derived via Fourier transform of these modal magnitude. Also, the free decay signal of the vibrating hull was obtained through the random decrement technique and the damping ratio was estimated with accuracy.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.45-55
• /
• 2018

Concerns are emerging in marine industry on the additional fatigue damages induced by hydroelasticity, and large container carriers, among others, are considered to be susceptible to this hydroelastic response due to its large size, deck openings and high speed. This study focuses on the fatigue damage estimation of 9,400TEU container carrier based on the full scale measurement data via long-base strain gage installed on the ship. Some correlation analyses have been also done to check whether there was significant torsional response during the voyage. Direct cycle counting method was used to derive stress histogram and the long-term fatigue damage was estimated based upon that analyzed data. It turned out that the fatigue damage of this particular ship during the measurement period increased by more than 60% due to the hydroelastic response of the hull, and main contribution is considered to come from vertical bending mode.