• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.200-200
• /
• 2020

본 연구에서는 SWAT 모형과 APEX-Paddy 모형의 연계 모델링을 통한 대표 BMP(Best management practice) 적용, 정식시기 및 벼 생육기간을 고려한 시나리오 적용을 통해 농업용수의 관리 및 수질환경 개선 등에 활용할 수 있는 저영향 영농활동을 분석하고자 하였다. 만경강 유역을 대상으로 SWAT 모형을 구축하고 유역 내에 위치한 논 시험포장을 대상으로 강우-유출 및 비점오염원 모니터링 자료를 활용하여 APEX-Paddy 모형을 구축하였다. SWAT 모형과 APEX 모형을 연계하여 유역의 수문, 수질에 대한 정밀한 모델링을 수행하였으며, 이는 저영향 영농활동을 분석하기 위한 필드단위의 정확한 결과를 유역차원에 반영하기 위함이다. 특히, 본 연구에 사용된 APEX-Paddy 모형은 농촌진흥청과 Texas A&M의 공동연구를 통해 개발된 새로운 모형으로서 한국의 논 영농활동 및 담수환경을 반영하여 논에서의 유출 및 비점오염원을 모의할 수 있다. 연계 모형의 적합성 평가를 위해 R² (Determine of Coefficient), RMSE (Root mean square error), NSE (Nash-sutcliffe efficiency)를 사용하였다. 적합성 평가 지표를 분석한 결과, 유출량은 R² 평균 0.91, RMSE 평균 2.87 mm/day, NSE 평균 0.78로 나타났다. T-N 부하량은 R² 평균 0.74, RMSE 평균 59.3 kg/ha/day, NSE 평균 0.50으로 나타났다. 저영향 영농활동 관리방안을 위한 시나리오로 1) 논의 물꼬높이(BMP) 관리 적용, 2) 벼 생육기간 조절을 고려하여 기온변화에 따른 정식시기, 벼 생육기간 등을 조정하여 적용하였다. 기후변화 시나리오는 10개 GCM 모델의 RCP 8.5 시나리오를 통해 분석하였으며, 유역차원의 미래 영향을 분석한 결과, 물꼬관리 BMP에 따라 담수심이 증가되며, 관개량이 감소하고 유출량 10.7%, T-N 11.2% 저감되는 것을 나타냈으며, 벼 생육기간 조절은 BMP보다 상대적으로 효과가 높진 않았지만, 유출량 1.4%, T-N 3.1%의 저감효과를 나타냈다. 따라서 두 가지의 저영향 영농활동 관리방안은 미래기간의 기후변화에 대응하여 농업용수 및 물관리에 도움이 될 것으로 사료된다. 하지만 본 연구결과는 모델링 결과에 의존한 것이며, 추후 지속적인 연구와 보완이 필요하다.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.51-63
• /
• 2005

Concrete pavement may suffer from material deterioration or structural problems, which lead to surface cracks and deflection of a concrete pavement. Degraded concrete pavement, when it is still under operation, should be recovered by an urgent maintenance to avoid the discontinued service leading to the significant traffic problems and economic loss. Seismic techniques are good tools to assess the structural integrity of concrete runway. It is because seismic techniques can evaluate engineering properties nondestructively and quickly and the evaluation can be extended to subgrade. In this study, a series of numerical simulations of stress-wave propagation were performed to verify feasibility of seismic techniques as an assessment tool. Based on the results of the numerical simulation, a framework of using seismic techniques was presented fur the nondestructive integrated assessment fur structural integrity of concrete runway. And the presented framework was applied to $\bigcirc\bigcirc$ concrete runway with surface cracks, which required urgent maintenance, to identify the causes of the surface cracks. The results obtained from the structural integrity assessment were compared with the measurements of the cores collected from the same runway for verification of the presented framework.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.377-380
• /
• 2004

최근 생체인식 분야는 IT 분야의 보안기술과 함께 빠르게 진전되어 왔으며, 현재 생체인식의 중요성이 인식되면서 국내외 생체인식 소프트웨어 시장이 급격히 증가하고 있는 추세이다. 이에 따라 생체인식 소프트웨어의 품질에 대한 평가가 요구되고 있으며. 생체인식 소프트웨어의 품질시험과 평가를 위한 기준으로 평가모듈(Evaluation Module)이 도출되어야 한다. 또한. XML(eXtensible Markup Language) 은 네트워크와 어플리케이션간 교환되어지는 정보를 명세하기 위한 언어로 데이터 교환과 공유에 대한 표준으로 그 응용 영역이 확장되어 적용되고 있다. 본 논문에서는 ISO/IEC 9126과 ISO/IEC 12119를 기반으로 생체인식 소프트웨어에 적합한 품질평가 체계를 위해 XML 스키마를 제안하였다. 실제 생체인식 소프트웨어의 평가모듈(EM)에서는 제안한 XML 스키마를 통해 유효성을 검사한다.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.325-329
• /
• 2023

높은 주조 품질을 요구받고 있는 대부분의 다이캐스팅업체들은 양산공정을 통해 사용되고있는 용탕의 청정도를 평가하고 모니터링을 해야만 한다. 여러 가지 평가방법들을 사용할 수 있지만 현장에서는 일부 측정방법만이 다이캐스팅에 적용되고 있으며 목적에 맞게 적절하게 사용하여야 한다. 세 가지 가능한 평가 방법인 K-Mold, 기계적물성 평가 및 PoDFA(다공성 디스크 여과 장치) 를 대상으로 소개하고자 한다. 우선, 각 방법들은 서로 사용 목적 목적에 따라 선택될 수 있으며 K-Mold는 현장에서 빠르고 간단하게 적용할 수 있는 방법으로 일정한 규격화된 시편의 파면을 만들고 파단면 관찰을 통해 일정한 크기 이상의 산화물 갯수를 확인하여 용탕의 품질을 관리하는 편리한 평가방법 중 하나다. 기계적 물성 테스트는 용탕 청결도에 대한 정성적, 정량적 정보를 모두 확인할 수 있으며 샘플링 테스트에 적합한 시험법이라 할 수 있다. 또한, PoDFA는 용탕내에 개재물의 종류별 정밀분석과 양에 대한 상대적 비교 분석으로써 현장의 많은 경험을 통하여 데이터 축적하고 분석하는 방법으로 사용방법에 대한 전문교육이 필요하다.

• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.111-117
• /
• 2023

Sampling inspection methods for quality control have been proposed a lot in the industry. However, the sampling inspection method for reliability, which is a quality over time, has been relatively less presented, and there are not many literatures that are clearly summarized. Therefore, this paper focuses on the reliability conformity test to verify that the reliability evaluation scale value of the target is satisfied during the reliability test. To this end, first, we look at the conditions that both consumers and producers can satisfy in terms of the OC curve and find out what sampling methods satisfy the desired level of producer risk and consumer risk. Next, two methods of the reliability sampling methods such as attribute and variable reliability sampling methods are examined. Specifically, the attribute reliability sampling method is a form of sampling plan where n samples are tested for a certain period of T hours and the lot is accepted if the number of failures is less than or equal to a certain number c. On the other hand, the variable reliability sampling method is a form of sampling plan where the lot is accepted if the reliability evaluation scale such as MTBF satisfies a certain standard. Both sampling plans may also use inspection tables.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.1
• /
• pp.19-25
• /
• 2019

In this present study, to evaluate the applicability of the monitoring system of the entire reservoir dam facility using the wireless sensor network system and a section representative of the domestic reservoir dam was selected as the test bed site and to operated a system that can evaluate the condition of the facility at the real time with monitoring. In order to set up a wireless sensor network system, the system assessment of present state was carried out for confirmation the risk factors and the limit values of the risk factors in limit state were calculated. The type and position of the sensor to be measured in the field were determined by setting the measurement items suitable for the hazardous area and the risk factor. In this paper, we evaluated the feasibility of the system by monitoring and constructing a wireless sensor network system in a field for a fill dam that can represent a domestic reservoir dam. Applicability evaluation was verified by comparing directly with the measurement of partial concentration method which is the measurement management technology of the dam.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1705-1713
• /
• 2010

The reliable fatigue life for hybrid composite joint structures was estimated by a statistical method for evaluating fatigue life; the results of the fatigue test varied widely. Cyclic bending tests were performed on a cantilever beam with a hybrid composite joint, which was developed for the body of a low-floor bus. In order to estimate the fatigue life of the hybrid composite joint structure by comparing the data obtained during the fatigue tests, the most suitable probabilistic density function among the normal, lognormal, and Weibull distributions was selected. The probabilistic-stress-life (P-S-N) curves calculated by using the selected Weibull distribution was suggested for process of statistical fatigue life estimation and reliability design.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.2
• /
• pp.140-146
• /
• 2008

Marine ecotoxicological standard method using fish larvae was established with the standard test species of Oryzias latipes(Japanese Medaka) and Paralichthys olivaceus(flounder) and with the 7 day $LC_{50}$ as endpoint. Test method referred to the USEPA(1994) with the replacement of test species found in the Korean water. Standard test species were selected in terms of the species supply and ecological importance in Korean waters. Japanese medaka can be reared with small tanks in the lab and has wide tolerance on salinity, and flounder eggs can be easily obtained from commercial fish hatcheries. General conditions for larval fish toxicity test are as follows. The possible salinity ranges for toxicity test were $0{\sim}35\;psu$ for medaka and >20 psu for flounder. Test type was designated as static non-renewal test if the dissolved oxygen in the test chamber does not fall below 4.0 mg/L. Ages of test species were selected as 7 days after hatched for medaka(about 5 mm TL) and 25 days for flounder(about 10 mm TL) because of the low natural mortality after these periods. Test can be accepted when the survival rates are over 80% in control. Also, species sensitivity on standard reference materials(copper, cadmium or zinc) must be provided with the toxicity test results.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1075-1086
• /
• 2008

In order to investigate the applicability and suitability of the industrial by-products to apply mono-layer cover system for non-sanitary landfill sites, 6 different industrial by-products, such as construction waste, bottom ash, gypsum, blast furnace and steel manufacture slags, and stone powder sludge, were evaluated. Various physicochemical and hydrodynamic properties of the industrial byproducts were investigated. The environmental safety was monitored using batch and long-term leaching tests as well. In addition, the flexibility of plants was observed by cultivating them in the industrial by-products. The results for physicochemical properties indicate that most of the materials considered appeared to be suitable for landfill cover. Particularly, the concentration levels of hazardous elements regulated by the Korean Law for Waste Management did not exceed the regulatory limits in all target materials. In addition, the concentrations of regulated elements for the Korean Soil Conservation Law were examined below the regulatory limits in most of materials considered, except for the stone powder sludge. The results of batch and long-term experiments showed bottom ash and construction waste were the most suitable materials for landfill cover among the industrial by-products considered. The results of plant studies indicate that the bottom ash among industrial by-products considered was most effective in developing vegetation on landfill site, showing fast germination and large growth index. At the final covering system made of mixture of soil and bottom ash, the optimum application rate of farmyard manure was observed to be 40-50 Mg/ha.

• Journal of The Korean Association of Information Education
• /
• v.14 no.4
• /
• pp.651-658
• /
• 2010

This paper is to study adequacy of developing tutorial series for primary school students regarding MOS certification and to analyze a validity. In order to analyze a level of difficulty, current primary teaching materials being used after class, in comparison with ICT discretionary hour materials being used through primary discretionary class, were evaluated. It was done by primary teachers with in- depth understanding of a level of difficulty and after class instructors using Likert scale through quantitative analysis. As a result, level of PowerPoint has a satisfactory fit (76%), however, the degree of difficulty of Word and Excel is quite high. On its subject matter, there is quite a dispute with present curriculum. Therefore, in order to introduce MS-Word or Excel, it is necessary to adjust a level of difficulty or related subjects according to the level of students.