• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.4
• /
• pp.258-270
• /
• 2012

Purpose: Use of inappropriate statistical methods may lead to incorrect conclusions and a waste of valuable resources. The goal of this study was to assess the frequency and the types of several common statistical errors in the published articles of the Journal of the Korean Academy of Prosthodontics (JKAP) for a 5-year period. Materials and methods: Of 336 articles in the JKAP published from 2006 to 2010, 255 articles using statistics were reviewed and classified by statistical method and year. The frequency and types of the statistical methods were examined, and the statistical errors were evaluated by the appropriateness of the experimental design, assumption check, independent outcomes, proper sample size and suitable use of statistical method. Statistical guidelines were completed based on the appropriateness. Results: Of the 255 articles using statistics, 193 articles (75.9%) used inferential statistics and 153 articles used SPSS statistical software (60.0%). Of the articles using inferential statistics, the three most frequently used statistical methods were ANOVA (41.5%), t-test (20.0%), and the nonparametric method (16.9%). The average rate of statistical errors was 61.2 percent, similar to the rate reported by several studies completed for the medical journal. Conclusion: After the whole analysis of the difference among the groups, post-hoc tests for the pairwise comparisons are required. The optimal sample size calculation is an essential part of this study protocol. To minimize the occurrence of statistical errors, statistical guidelines were developed according to each statistical test procedure and will contribute to the academic improvement in the JKAP.

• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.167-195
• /
• 2012

This study focuses on the characteristic of socio-psychological gender of a consumer except a biological gender. Socio-psychological gender is the self-image of a consumer which is related to the gender role. The goal of this study is, first, to examine if socio-psychological gender has more effect on the purchase intention than biological gender. Second, by classifying a group with femininity among socio-psychological gender, it is to examine what kinds of shopping value it aims at. Finally, it is to examine the difference between men and women from the purchase intention according to the circumstances. The result of this study is summarized as follows. First, a consumer can have both characteristics of biological gender and socio-psychological gender. There are masculinity, femininity, bisexuality, and undifferentiated type for the classification of socio-psychological gender. This study shows that there is relatively much bisexuality which has masculinity and femininity at the same time. The outcome showed that the purchase intention was higher for the product which corresponds to socio-psychological gender of a consumer than biological gender. Second, it indicated that a group with femininity pursued pleasurable shopping as compared to a group with masculinity. By contrast, it showed that a group with masculinity aimed at practical shopping more greatly. Finally, it showed that while women are less sensitive to the purchase intention at the male-dominated circumstances, men's purchase intention get lower at the female-dominated circumstances.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.201-208
• /
• 2008

Statement of problem: A new implant impression technique which use abutments as impression coping, and use resin cement as a splinting material was described. Accuracy of this technique was compared with conventional closed tray and resin splinted open tray technique for a $15^{\circ}$ angled 3-implant model Material and methods: A dental stone master model with 3 linearly positioned implant analogue and a reference framework which was passively fitted to it were fabricated. The center analogue was perpendicular to the plane of model and the outer analogues had a $15^{\circ}$angulation forward or backward. 10 closed tray impressions, 10 resin splinted open tray impressions, 10 abutment-resin framework cementation impressions and 10 abutment-metal framework cementation impressions were made with additional silicone material and poured with dental stone. A light microscope with image processing was used to record the vertical gap dimension between reference framework and analogue of duplicated cast made with each 4 impression techniques. Statistical analysis used one-way ANOVA with post-hoc tests Tukey test of .05 level of significance Results: Significant difference in the vertical gap dimension was found between closed tray technique; 74.3 (${\pm}33.4$)${\mu}m$ and resin splinted open tray technique, and two other new technique. (P<.05) Abutment-metal framework cementation technique;42.5 (${\pm}11.9$)${\mu}m$ was significantly different from resin splinted open tray technique. (P<.05) Abutmentresin framework cementation technique;51.0 (${\pm}14.1$)${\mu}m$ did not differ significantly from resin splinted open tray technique;50.3 (${\pm}16.9$)${\mu}m$. (P>.05) Conclusion: Within limitations of this study, the accuracy of implant level impressions of resin splinted open tray technique was superior to that of closed tray technique. A new technique using abutment and metal framework cementation was more accurate than resin splinted open tray technique.

• The Korean Journal of Mycology
• /
• v.41 no.3
• /
• pp.172-180
• /
• 2013

Grey mold infection rate in tomato was investigated with the inoculation of dead flowers on Botrytis selective media. The grey mold infection rate of flower after fruiting were higher in the order of after 45 days, after 25 days, and fruiting day with 100%, 87% and 65%, respectively. The number of infected flowers were increased with time increase after the flowering before fruiting. BSM (Botrytis selective medium) was used to check grey mold infection rate depending on the flowering stage and cultivar. Grey mold infection rate depending on the flowering stage was similar in all the beef-tomato cultivar as 1.5~5% at preflowering, 1.5~45% at flowering and 75~90% at fruiting. On the other hand, cherry tomato cultivar "KoKo" had lower infection rates of 0~3.5% at pre-flowering, 10~30% at flowering and 20~50% at fruiting. These resulted from the fact that beaf-tomato cultivar have much bigger flowers and larger amount of pollens compared to those of cherry tomato cultivar. The amounts of falling pollens of Botrytis spp. were checked for beaf-tomato cultivar and cherry tomato cultivar using BSTM. The amounts of falling pollens were increased as growth period was extended, and the amount of spores increased rapidly during the outbreak of grey mold. Twelve field trials in Buyeo and Iksan areas showed that Fluazinam, and Diethofencarb+Carbendazim were effective fungicides to control tomato grey mold, and these results were similar to those of field trials with BSTM. This is the first report of Fluazinam as a effective fungicide for the control of grey mold of tomato even though it has not been registered yet for the control of gray mold in tomato.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.193-202
• /
• 2012

'Joseong', a winter forage triticale cultivar (X Triticosecale Wittmack), was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2010. The cultivar 'Joseong' was selected from the cross FAHAD_5/RHINO1R.1D 5+10 5D'5B'//FAHAD_5 by CIMMYT (Mexico) in 1992. Subsequent generations were handled in pedigree selection program at Mexico from 1993 to 1998, and a line 'CTSS92Y-A-4Y-0M-5Y-0B' was selected for earliness and good agronomic characteristics. After preliminary and advance yield test in Korea for 2 years, the line designated as a line name of 'Iksan26'. The 'Iksan26' was subsequently evaluated for earliness and forage yield in 7 different locations such as Jeju, Iksan, Cheongwon, Yesan, Naju, Daegu, and Jinju from 2008 to 2010 and finally named as 'Joseong'. The cultivar 'Joseong' has characteristics of dark green leaf, yellow culm and spike, and large grain of yellowish brown color. The heading date of cultivar 'Joseong' was April 24, which was 5 days earlier than that of check cultivar 'Shinyoung'. It showed better tolerance or resistance to lodging, wet injury, powdery mildew, and leaf rust than those of the check cultivar 'Shinyoung'. The average forage dry matter yield of cultivar 'Joseong' at milk-ripe stage was 14.5 MT $ha^{-1}$, which was lower than 16.5 MT $ha^{-1}$ of the check cultivar 'Shinyoung'. The silage quality of 'Joseong' (5.3%) was lower to the check cultivar 'Shinyoung' (6.0%) in crude protein content, while was 2.1% superior to the check cultivar 'Shinyoung' (61.9%) in TDN (total digestible nutrients). It showed 5.1 MT $ha^{-1}$ of grain yield, which was 40% higher than that of the check cultivar 'Shinyoung' (3.65 MT $ha^{-1}$). This cultivar is recommended for fall sowing crop in the area where daily minimum mean temperatures are averaged higher than $-10^{\circ}C$ in January, and as a winter crop using whole crop forage before planting rice in around Korea.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.686-691
• /
• 2012

The objective of this research is to present method development and validation for the simultaneous determination of lutein and zeaxanthin using ultra performance liquid chromatography (UPLC). Also, rapid quantification was performed on six green leafy vegetables (Allium tuberosum, Aster scaber, Hemerocallis fulva, Pimpinella brachycarpa, Sedum sarmentosum and Spinacia oleracea) that are commonly consumed in Korea. Separation and quantification were successfully achieved with a Waters Acquity BEH C18 ($50{\times}2.1mm$, $1.7{\mu}m$) column by 85% methanol within 5 min. Two compounds showed good linearity ($r^2$ > 0.9968) in $1-150{\mu}g/mL$. Limit of detection (LOD) and quantification (LOQ) for lutein and zeaxanthin were 1.7 and 5.1 g/mL and 2.1 and 6.3 g/mL, respectively. The RSD for intra- and inter-day precision of each compound was less than 10.69%. The recovery of each compound was in the range of 91.75-105.13%. Aster scaber and Spinacia oleracea contained significantly higher amounts of lutein ($4.06{\pm}0.24$ and $3.97{\pm}0.10mg$/100 g of fresh weight), respectively.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.4
• /
• pp.223-237
• /
• 2008

The purpose of this research was to provide the information needed for improving the contents in housing unit of middle school technology and home economic textbook. For this purpose, a survey questionnaire was developed to examine teachers' importance perception of 48 contents in housing unit. A direct survey and an e-mail survey were used to collect data from teachers, and a total number of 233 data were analyzed. Conclusions were summarized as following: 1. Among the 48 contents in housing unit, the average score of teachers' importance perception of the 18 contents on 'interior environment and equipments' was 3.94; the average score of teachers' importance perception of the 15 contents on 'living space plan and use' was 3.78; and the average score of teachers'importance perception of the 15 content on 'housing maintenance and repair' was 3.42. Therefore, the 15 contents on 'housing maintenance and repair' must be revised. 2. Teachers' importance perception of 25 contents, among the 48 contents in housing unit, were significantly differentiated by gender, age, teaching experience, scholastic attainment, subject in charge(technology, home economics, technology and home economics), school type(boys' middle school, girls' middle school, coeducation), and region(city, county). Therefore, the 25 contents, of which importance perception were influenced by teachers' characteristics, must be revised in order to maintain the consistent importance perception. Suggestions were that the team teaching of technology and home economic textbook was more recommendable; that the local situations must be considered in the contents of housing unit and; that the contents of housing unit must be segmented into a minimum unit for the accurate evaluation.

• The Korean Journal of Pesticide Science
• /
• v.4 no.3
• /
• pp.40-46
• /
• 2000

To select the effective fungicides for the control of leaf spot disease of jujube tree (Zizyphus jujuba) caused by Phoma sp., inhibitory effects of 26 fungicides for mycelial growth were investigated at $250{\mu}g\;a.i./m{\ell}$. In the test, eight fungicides were selected and minimum inhibitory concentration (MIC) for mycelial growth and an inhibitory effect for spore germination were investigated. Among the fungicides, myclobutanil, hexaconazole, and triflumizole were excluded in control effect tests because of their relatively high MICs. MICs were ranged $10-50{\mu}g\;a.i./m{\ell}$ for benomyl, carbendazim + kasugamycin (CK), and thiophanate-methyl. triflumizole (TT), and $50-250{\mu}g\;a.i./m{\ell}$ for iprodione + propineb (IT) and iminoctadine-triacelate (IT). However, benomyl and IP showed very low inhibitory effect on conidial germination. When the fungicides were sprayed on the seedlings before the leaves were inoculated with conidial suspension of Phoma sp., the protective values of CK and TT were around 70% at 1,000 ppm and around 90% at 2,000 ppm. The protective values were around 70% at 2,000 ppm (benomyl), 4,000 ppm (IP), and 8,000 ppm (IT). When the fungicides were sprayed after inoculation, benomyl showed the highest curative values of over 90% at 1,000 ppm and the values of CK and TT ranged $70{\sim}80%$ at 1,000 ppm. However, IP and IT had little or no effect on therapy of the disease. IT caused necrotic phytotoxicity on the leaves of jujube seedlings. As results, the best fungicides for the protection of jujube trees from leaf spot disease were CK (2,000 ppm) and TT (2,000 ppm) and for the remedy of the tree, benomyl (1,000 ppm) was the best. Therefore, alternate application of benomyl and CK or TT will be effective in the disease control.

• Journal of Chest Surgery
• /
• v.32 no.12
• /
• pp.1093-1099
• /
• 1999

배경 : 류마티스성 승모판막 폐쇄부전증과 퇴행성 승모판막 폐쇄부전증에서 승모판막 성형술의 결과와 비교하여 류마티스성 승모판막 폐쇄부전증에서도 승모팍막성형술이 적합한 치료방법이 될 수 있는지를 알아보았다. 대상 및 방법 : 95년 1월부터 98년 12월 까지 승모판막 성형술을 시행받은 184명의 환자중에서 류마티스성 승모판막 폐쇄부전증 49례(1군)의 퇴행성 승모판막 폐쇄부전증 78례(2군)를 대상으로 하였다. 평균연령은 1군이 36.3$\pm$14.6(16-74세) 2군은 52.5$\pm$13.4(14-77)세였다 총 추적 관찰기간은 1군이 72.2인년 2군이77.2인년이었다 두군에서 수술후와 수술후 6개월 1년 및 이후 1년 단위로 주기적인 심초음파를 시행하였고 이를 통계적 검정하였다. 결과 : 두 군간에 수술전 혈류역학적인 차이를 보이지 않았고 수술전 평균 승모판막 폐쇄 부전의 정도는 1군이 3.0$\pm$0.4, 2군이 3.9$\pm$0.3였으나 수술후 추적 관찰에서 각각 0.9$\pm$0.9와 0.8$\pm$0.7정도의 양호한 판막 성형술의 결과를 보였고 승모판막 면적의 변화나 승모판막에서의 평균압력차이 등 혈류역학적인 결과에도 차이를 보이고 있지 않았다 수술조기 사망과 후기 사망은 없었으며 재수술율은 1군이 인년대비 1.4% 2군이 인년대비 2.6%였고 색전발생율은 1군이 인년대비 2.8% 2군이 1.3%였다. 심내막염발생은 1군에서만 1례있었으며 상기 결과들에서 두군간에 의미있는 차이를 보이고 있지는 않았다 결론 : 향후 장기적인 추적 관찰이 필요하나 중기 성적에서 승모판막 성형술이 류마티스성 승모판막 폐쇄 부전증에서도 효과적인 치료방법임을 알수 있었다.다 출생후 폐포막의 FN의 활성은 출생후 5일 및 7일에 최고주에 달했다. 출생직후 1-2일경에 혈관의 조직내 FN의 활성이 양성을 나타내지만 3일이후 활성이감소되었다. 폐포대식세포내 FN의 활성은 출생후 증가되었다. 폐조직내 소기관지의 FN의 활성은 출생후 완만하게 상승되었다. 큰 폐포세포는 출생 1-3일에 일정량의 FN 반응이 세포질과 미세융모내에 관찰되었다. 결론 : 이상과 같은 결과로 흰쥐의 폐포의 분화과정이 계속되는 출생후 폐에서 FN의 분비는 7일이내에 성숙흰쥐의 폐포내 반응과 비슷한 반응으르 보이며 이때 폐의 실질조직은 분화가 거의 완료되었을 것으로 사료되었고 큰 폐포세포에서도 FN이 분비되는 것으로 결론지울수 있다.X>에서 $1,332.75{\mu}g/mL$으로 최 대값을 나타내었으며, 추출시간 4.24시간 및 시료에 대한 용매비 9.71 mL/g에서 가장 높게 나타났다. 추출온도가 높고, 추출시간이 증가할수록 총 polyphenol 함량이 증가하는 경향을 나타내었다. Gallic acid 함량은 $65.84^{\circ}C$에서 $30.51{\mu}g/mL$으로 최대값을 나타내 었으며, 추출시간 1.65시간 및 시료에 대한 용매비 17.17mL/g에서 가장 높은 추출율을 보였다. Gallic acid 함량에 대한 추출조건의 영향은 추출시간과 용매비에 영향을 받는 것으로 나타났으며, 설정된 범위 내에서 온도에 대한 영향은 거의 나타나지 않는 것으로 나타났다. 실험연구가 더 필요하리라 본다. 혈액학적 변화를 유도하고 환자의 연령, 혈소판 수, 대동맥 차단 시간, 체외 순환 시간, 술후 PT 및 aPTT와 같은 다인적 상황들이 술후 출혈에 영향을 미친다는 점들을 시사하고

• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.101-116
• /
• 2012

Accident prediction models have been utilized to predict accident possibilities in existing or projected freeways and to evaluate programs or policies for improving safety. In this study, a traffic accident prediction model for freeways was developed for the above purposes. When selecting variables for the model, the highest priority was on the ease of both collecting data and applying them into the model. The dependent variable was set as the number of total accidents and the number of accidents including casualties in the unit of IC(or JCT). As a result, two models were developed; the overall accident model and the casualty-related accident model. The error structure adjusted to each model was the negative binomial distribution and the Poisson distribution, respectively. Among the two models, a more appropriate model was selected by statistical estimation. Major nine national freeways were selected and five-year dada of 2003~2007 were utilized. Explanatory variables should take on either a predictable value such as traffic volumes or a fixed value with respect to geometric conditions. As a result of the Maximum Likelihood estimation, significant variables of the overall accident model were found to be the link length between ICs(or JCTs), the daily volumes(AADT), and the ratio of bus volume to the number of curved segments between ICs(or JCTs). For the casualty-related accident model, the link length between ICs(or JCTs), the daily volumes(AADT), and the ratio of bus volumes had a significant impact on the accident. The likelihood ratio test was conducted to verify the spatial and temporal transferability for estimated parameters of each model. It was found that the overall accident model could be transferred only to the road with four or more than six lanes. On the other hand, the casualty-related accident model was transferrable to every road and every time period. In conclusion, the model developed in this study was able to be extended to various applications to establish future plans and evaluate policies.