• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.1
• /
• pp.42-48
• /
• 2001

Over two decades, many researchers have performed studies on strength size effects in composite laminates under tensile and flexural loads. It is well known that there is a tendency for the strength of fibre-reinforced composites to decrease with increasing specimen size. Under compressive load, however, little work has been done on the effect of specimen size to failure strength. This is due to the fact that compressive testing of composite is very difficult. In this paper, the effect of the test specimen size on the compressive strength of composites containing open hole was considered using T300/924C, $>[45/-45/0/90]_{3S}$. For sizing test specimens, the in-plane scaling method is used i.e., the change of two- dimensional specimen area in specimen width and gauge length. The results clearly show that there is a hole size effect in the finite width plates. In addition, the specimens which have the same a/W(hole diameter/specimen width) exhibit a tendency of size effect. In contrast, test results of the unnotched specimens did not show a clear strength size effect.

• Composites Research
• /
• v.20 no.5
• /
• pp.56-63
• /
• 2007

An approach using complex potentials is presented for analysis of composite plate with an elliptical hole or a rectilinear crack. Composite structure is susceptible to encounter impact damages, which lead to considerable decrease in its residual strength. Such impact damages could be modeled as an equivalent elliptical hole or notch-like crack. Even though finite element method is widely used to analyze stresses or fracture mechanics parameters around such damage, it is tedious to make successive FE-modeling for damage tolerance assessment under fatigue loadings. In this point of view, the solutions based on complex potentials are very simple and easy to use. The computed results are also compared and discussed with those from FEA.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.259-268
• /
• 2000

Because of their superior mechanical properties to isotropic materials, composite laminated plates are used for many structural applications that require high stiffness-to-weight and strength-to-weight ratios. Composite materials are always subject to a certain amount of scatter in their elastic moduli, but most analyses and designs with the materials are usually conducted by assuming that the material properties are fixed and have no uncertainties. In this paper, a convex modeling approach is introduced to take account of such uncertainties in elastic moduli. It is used with the finite element method to predict the onset of failures in composite laminated plates subject to in-plane loading. Numerical results show that failures begin at the smaller load when the uncertainties of elastic moduli considered and therefore, such uncertainties should be considered at the design stage for the safety and reliability of the structures.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.155-158
• /
• 2001

The layup optimization by genetic algorithm (GA) for the strength of laminated composites with free-edge is presented. For the calculation of interlaminar stresses of composite laminates with free edges, extended Kantorovich method is applied. In the formulation of GA, repair strategy is adopted for the satisfaction of given constraints. In order to consider the bounded uncertainty of material properties, convex modeling is used. Results of GA optimization with scattered properties are compared with those of optimization with nominal properties. The GA combined with convex modeling can work as a practical tool for light weight design of laminated composite structures since uncertainties are always encountered in composite materials.

• Defense and Technology
• /
• no.10 s.164
• /
• pp.43-44
• /
• 1992

복합재 연소관과 노즐을 기계적 체결방법으로 결합하면 결합부위에서 재료의 불연속성과 기하학적 불연속성으로 인한 높은 응력집중이 발생해 구조적으로 매우 취약하게 됩니다. 복합재 연소관의 경우에는 내압을 받는 원통형 구조물이므로 기존의 평판에 대한 연구결과를 그대로 사용할수 없으므로, 이 글에서는 복합재 셀 구조물의 응력 및 파손 해석을 수행할수 있도록 1차전단변형 셀이론을 이용한 유한요소해석 프로그램을 개발하였습니다. 기계적체결부위의 모델링에 대해 검토하였으며 복합재료의 파손평가에 사용되는 여러가지 파손식을 적용해 비교하였습니다. 이 해석 방법을 이용해 복합재 연소관의 적층각, 볼트직경, 연소관의 끝단까지의 길이 등이 파손하중에 미치는 영향을 제시하였습니다

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.249-252
• /
• 2005

Prediction of damage caused by low-velocity impact in laminated composite plate is an important problem faced by designers using composites. Not only the inplane stresses but also the interlaminar normal and shear stresses playa role in estimating the damage caused. The work reported here is an effort in getting better predictions of damage in composite plate using DNS approach. In the DNS model, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. Through comparison with the homogenized model. In the view of microscopic mechanics with DNS model, interlaminar stress behaviors in the inside of composite materials is investigated and compared with the results of the homogenized model which has been used in the conventional approach of impact analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1337-1343
• /
• 2004

Shape optimization was performed to obtain a precise shape of cutouts including the internal shape of cutouts in a laminated composite plate by three dimensional modeling using solid element. Volume control of the growth-strain method was implemented and the distributed parameter chosen as Tsai-Hill fracture index for shape optimization. It makes Tsai-Hill failure index at each element uniform in laminated composites under the predetermined volume a designer requires. Shapes optimized by Tsai-Hill failure index were compared with those of the initial shapes for the various load conditions and cutouts. The following conclusions were obtained in this study; (1) It was found that growth-strain method was applied efficiently to shape optimization of three dimensional cutouts in a laminate composite, (2) The optimal shapes of the various load conditions and cutouts were obtained, (3) The maximum Tsai-Hill failure indices of the optimal shapes were remarkably reduced comparing with those of the initial shapes.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.277-282
• /
• 2003

The growth-strain method was applied to cutout optimization in laminated composite plates. Since the growth-strain method optimizes a shape by generating the bulk strain to make the distributed parameter uniform, the distributed parameter was chosen as Tsai-Hill value. In this study, of particular interest is to see whether the growth-strain method developed for shape optimization in isotropic media would work for laminated composite Plates. In volume control of the growth-strain method, it makes Tsai-Hill value at each element uniform in laminated composite plates under the predetermined volume. The shapes optimized by Tsai-Hill fracture index were compared with those of the initial shapes for the various load conditions and predetermined volumes of laminated composite plates. As a result, it was verified that volume control of the growth-strain method worked very well for cutout optimization in laminated composite plates.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.69-73
• /
• 1999

This study discusses a non-contact optical technique, electronic speckle pattern interferometry(ESPI), that is well suited for in-plane and out-of-plane deformation measurement. AS4/PEEK[30/-30/90]s, composite laminate plate was analyzed by ESPI to determine the vibration characteristics with tensile loading and without it. vibration mode shapes are quantitatively compared with the result of numerical analysis. The experimental results agree well with those of numerical analysis. we found that when the composite laminate plate is under the tensile loading, vibration modes can be measured with high accuracy by ESPI.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.1
• /
• pp.39-46
• /
• 2000

An analysis of the free vibration for the metal-piezoceramic laminated thin plates is described. The purpose of this study is to develop a equivalent method for the free vibration analysis of metal-piezoce-ramic laminated thin plate which are not sysmmetric about the adhered layer and the piezoelectric effect. In order to confirm the validity of the vibration analysis, double Fourier sine series is used as a modal displacement function of a metal-piezoceramic laminated thin plate and applied to the free vibration analysis of the plate under various boundary conditions.