• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.104.1-104.1
• /
• 2012

타이타늄(Ti)은 비강도가 높고, 내식성이 우수하여 항공기, 자동차 및 선박과 같은 수송기기의 소재로 사용되고 있다. 이러한 특성을 가진 타이타늄을 이종소재와 결합하여 더 우수한 기계적 특성을 얻을 수 있다면, 그 응용범위를 확대할 수 있을 것이다. 본 연구에서는 타이타늄과 알루미늄(Al) 판재를 적층한 후, 열간압연을 통해 타이타늄/알루미늄 적층재를 제조하였다. 이와 같은 적층재를 다양한 압하율로 냉간 압연한 후 미세조직을 관찰하였으며, 인장시험을 통해 기계적 특성을 조사하였다. 아울러 타이타늄 판재만으로도 유사한 실험을 실시하여 기계적 특성을 적층재와 비교 평가하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.4
• /
• pp.280-284
• /
• 2002

This paper presents computer simulations of the stacking and transferring system for the fast freeform fabrication system. The stacking and transferring system is essential for the fast freeform fabrication system and its stable motion is very important for consistent stacking of the cut slices. The stacking and transferring system can be modeled as a pneumatic system. The system consists of air compressor, the control valve, and the cylinder. The governing parameters have been changed and the simulation results are shown to predict the time response of the system. The results show some parameters should be correctly tuned to obtain stable system response.

• Composites Research
• /
• v.13 no.6
• /
• pp.63-72
• /
• 2000

In this paper, statistical treatments of effective properties for plain weave textile composites were presented. Configurations up to 32 layers with varied stacking phase shifts were considered. Effective properties were calculated by numerical simulation in which uni-axial tensile and shear load were applied at unit cell. Sample analysis was utilized to consider the inherent randomness in the phase shift and the results were treated statistically. It was found that effective properties were dependent on stacking phase shifts for thin plain weave textile composites. The distribution of $E_{xx}$ and $V_{xy}$ were skewed and the range of possible values was relatively large. As the number of layers increased, however, the distribution width became narrower and mean values converged. In contrast, $G_{xy}$ was not affected by phase shifts and thickness changes.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.188-195
• /
• 2021

In recent years, additive manufacturing (AM) processes have emerged as an important manufacturing technology for a multi-item small sized production to lead the 4th industrial revolution. The layer-by-layer deposition characteristics of AM process can rapidly produce physical parts with three-dimensional geometry and desired functionality in a relatively low cost environment. The goal of this paper is to investigate the applicability of AM process to appropriate technologies for developing countries. Through the review of examples of appropriate technology of the AM process, the possibility of a practical usage of the AM process for the appropriate technologies is examined. In addition, significant applications of the AM process to the appropriate technology are introduced. Finally, future issues related to production of physical parts for developing countries using the AM process are discussed from the viewpoint of the appropriate technology.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.219-225
• /
• 2011

Advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The simply supported laminated plates are analyzed by the specially orthotropic laminates theory. This method, however, may be too difficult for some practising engineers. In this paper, the result of analysis for such plate by means of the beam theory with unit width is reported. The plate aspect ratio considered is from 1 : 1 to 1 : 5. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms($M_x$) on the relevant partial differential equations of equilibrium. In this paper. the influence of the aspect ratio on the natural frequency of the specially orthotropic laminated plates is studied and it is concluded that the method used is sufficiently accurate for engineering purposes. The result of this paper can be used for simply supported laminated plates analysis.

• Composites Research
• /
• v.32 no.6
• /
• pp.327-334
• /
• 2019

The delamination is a special mode of failure occurring in composite laminates. Several numerical studies with finite element analysis have been carried out on the delamination behavior of unidirectional composite laminates. On the other hand, the fracture for the multi-directional composite laminates may occur not only along the resin-fiber interface between plies known as interply or interlaminar fracture but also within a ply known as interyarn or intralaminar fracture accompanied by matrix cracking and fiber bridging. In addition, interlaminar and intralaminar cracks appear at irregular proportions and intralaminar cracks proceeded at arbitrary angle. The probabilistic analysis method for the prediction of crack growth behavior within a layer is more advantageous than the deterministic analysis method. In this paper, we analyze the crack path when the mode I load is applied to the cross-ply carbon/epoxy composite laminates and collect and analyze the probability data to be used as the basis of the probabilistic analysis in the future. Two criteria for the theoretical analysis of the crack growth direction were proposed by analyzing the stress field at the crack tip of orthotropic materials. Using the proposed method, the crack growth directions of the cross-ply carbon/epoxy laminates were analyzed qualitatively and quantitatively and compared with experimental results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.481-481
• /
• 2013

Chemical bath deposition (CBD) 기술에 의해 slide glass 기판 위에 CdS 박막을 적층 형성하였다. 적층된 박막들은 CdCl2와 thiorea (H2NCSNH2)를 증류수와 혼합 시dipping의 온도 조건, pH 조건, 시간 및 횟수를 달리하여 균일한 표면이 형성되도록 하였다. 적층된 박막은 $200^{\circ}C$ 이상의 고온에서 annealing하여 결정화하였다. 적층한 박막은 결정화 요인들을 XRD, FE-SEM, AFM, EDX, UV-Vis spectroscopy를 통해 조사하였다. 형성된 박막은 포토레지스터로 활용될 가능성을 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.586-589
• /
• 2004

Ni 내부전극을 적용한 X7R의 온도특성을 가지는 고압용 적층 칩 캐패시터를 설계, 제작하였으며 제작된 캐패시터 신뢰성을 검토하였다. 고압용 캐패시터 설계시 절연파괴전압과 유전체 두께간의 최적의 두께가 있음을 볼 수 있으며 그린시트 두께 24 um의 경우 weibull 계수는 13.38, 단위 절연파괴전압은 70 [V/um]을 얻을 수 있었다. X7R 3216, 100 [nF] 정격전압 250[V] 캐패시터를 설계하여 절연파괴전압은 최고 1.29 [KV]인 고압용 칩 캐패시터를 제작하였다. 적층 칩 캐패시터 절연파괴 모드는 유전체 층간의 절연파괴와 더불어 내부전극과 외부 전극 또는 세라믹 소체와의 절연파괴 모드가 나타남을 볼 수 있다.

• Composites Research
• /
• v.28 no.5
• /
• pp.277-284
• /
• 2015

This paper presents a method to detect the fiber property variation of laminated GFRP plates from natural frequency response data. The combined finite element analysis using ABAQUS and the inverse algorithm described in this paper may allow us not only to detect the deteriorated elements from the mirco-mechanical point of view but also to find their numbers, locations, and the extent of damage. To solve the inverse problem using the combined method, this study uses several natural frequencies instead of mode shapes in a structure as the measured data. Several numerical results show that the proposed system is computationally efficient in identifying fiber stiffness degradation for complex structures such as composites with various layup sequences.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.76-82
• /
• 2000

PTC thermistors with multilayer structure were fabricated by internal electrode bonding technique in order to realize low resistance. MLPTC (Multilayer Positive Temperature Coefficient) possess various features, such as small size, low resistivity and large current. We describe the effect of additives on the PTC characteristics, voltage - current characteristics, temperature dependence of resistance and complex impedance spectra as a function of frequency range 100 Hz to 13MHz to determine grain boundary resistance. It was found that MLPTC thermistor has both highly nonlinear effects of temperature dependent resistance and voltage dependent current behaviors, which act as passive element with self-repair mechanisms. Decrease of room temperature resistance with increasing the number of layers was demonstrated to be a grain boundary effect. Switching characteristics of current were caused by heat capacity of PTC thermistor with multilayer structure. Switching times are lengthened by increasing the number of layers.