• Composites Research
• /
• v.20 no.5
• /
• pp.1-6
• /
• 2007

This study was performed to make a comparison on low-velocity impact behavior between graphite/epoxy composite laminate and steel plate. In order to validate the proposed scheme fur the impact behavior of the plate, the Karas's impact model was used. The impact models for this comparative study are the graphite/epoxy composite plate having $[0/90/45/-45/-45/45/90/0]_{8S}$ laminate sequence and the steel plate with a steel ball impactor. The low-velocity impact behaviors for two types of plates were comparatively investigated and performed by considering different impactor velocities and weights respectively. In this investigation, it was found that the composite laminate has impact energy absorption effect due to more flexible behavior than the steel plate, and also it has better characteristics on impact damage and weight.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.1
• /
• pp.29-34
• /
• 2012

Even though the longitudinally stiffened laminated composite plates with closed section ribs should be an effective system for axially compressed members, the existing researches on the applications of closed-section ribs, especially for the laminated composite plates, are not sufficient. This study is aimed to examine the influence of the sectional stiffness of U-shaped ribs on the buckling modes and strengths of laminated composite plates. Applying the orthotropic plates with eight layers of the layup $[(0^{\circ})_4]_s$ and $[(0^{\circ}/90^{\circ})_2]_s$, 3-dimensional finite element models for the U-rib stiffened plates were setup by using ABAQUS and then a series of eigenvalue analyses were conducted. From the parametric studies, the minimum required ply thicknesses as well as the buckling strengths were presented for the analysis models. The buckling strengths were compared with the theoretical critical stress equation for simply supported plates based on the Classical laminated plate theory. This study will contribute to the future study for evaluating the minimum required stiffness and optimum design of U-rib stiffened plates.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.107-115
• /
• 1999

Microstructural variation and strengthening effects with lamination methods of alumina fiber-reinforced ${\gamma}$-LiAlO2 matrixes for Molten Carbonate Fuel Cell(MCFC) were studied. The porosities of all matrix laminated by hot-pressing of two green sheets under 1 kg/$\textrm{cm}^2$ at 45$^{\circ}C$ for 1 min and by double-casting which the second layer cast on the first green sheet dried for 3.5h were more than 50%. The strength of the Al2O3 fiber-reinforced matrix prepared by lamination was enhanced by 70% in comparison with the non-laminated matrix (115 gf/$\textrm{mm}^2$) and the strength-directionality due to fiber-orientation also could be removed. The strength of matrixes laminated by triple-casting was higher than that of the double-cast matrix, but triple-cast matrix showed the directionality with the casting direction, and furthermore its porosity was less than 50%. Although the strength of matrixes laminated by double-casting (195 gf/$\textrm{mm}^2$) is slightly less than that of matrixes laminated by hot-pressing (212 gf/$\textrm{mm}^2$), the double-casting method was evaluated to be more efficient laminating process in MCFC matrix processing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.193-198
• /
• 2021

In this study, the rheological characteristics and of 3D printing composite materials and the compressive strength characteristics according to the lamination patterns were evaluated. As a result of rheology test, rapid material change was observed after 60 minutes of extrusion, yielding stress 1.4 times higher than immediately after mixing, and plastic viscosity was 14.94-25.62% lower. The compressive strength of the specimens manufactured in the mold and the laminated specimens were compared, and the lamination pattern of the laminated specimens were 0°, 45°, and 90° as variables. The compressive strength of the mold casting specimen and the laminated specimen from 1 to 28 days of age showed similar performance regardless of the lamination pattern. In particular, at the age of 28 days, the modulus of elasticity, maximum compressive strength, and strain at maximum stress of all specimens were almost the same. In order to analyze the interface of the laminated specimens, X-ray CT analysis of the specimen whose compressive strength were measured was performed. Through CT analysis, it was confirmed that cracks did not occur at the lamination interface, which can be judged that the interface in the laminated specimen behaved in an integrated manner.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.249-249
• /
• 2012

최근 주목받고 있는 Flexible Organic Light Emitting Diode (OLED) display에서는 Flexible 특성이 요구된다. 이는 현재 쓰이는 유리기판 대신 플라스틱기판으로 만들어야 가능하다. 하지만 플라스틱기판은 구성물질로 유기물을 사용하므로 수분과 산소의 투과에 매우 취약하다. 이는 장시간 사용 시 기판 위에 제작된 소자성능저하를 야기하는 등의 소자 신뢰도에 치명적 결함을 갖게 하는 원인이 된다. 따라서 기판 위의 소자를 보호할 수 있는 봉지기술 개발이 필요한데 가장 잘 알려진 플라스틱 기판에 적합한 Barrier기술로 유기물과 무기물을 교대로 적층하는 기술[1] 등이 있다. 본 연구에서는 PE-CVD 공정기술을 이용한 Flowable Oxide 박막과 ALD 공정기술을 이용한 Al2O3 무기물 박막을 적층하여 봉지박막을 구성하려 한다. Flowable Oxide는 저온공정이 가능하며 높은 증착속도와 뛰어난 Gap fill 특성을 가지고 있는데 이는 플라스틱기판의 엉성한 분자구조를 치밀하게 만들 것으로 예상되며 표면의 Pin-hole 또한 쉽게 채우는 특성이 있다. 실험은 Polyethylene Naphthalate (PEN) film 위에 PE-CVD 공정을 이용하여 Flowable Oxide를 증착하고, 그 후에 ALD 공정을 이용하여 Al2O3을 적층한 것을 하나의 샘플로 하였다. 샘플의 분석은 Ca test를 이용한 Water Vapor Transmission rate(WVTR)과 FT-IR, FE-SEM을 이용하여 분석하였다. FT-IR로 박막의 구성요소를 확인 하고 FE-SEM으로 박막의 Cross section image를 얻을 수 있었으며 또한 $4.85{\times}10^{-5}g/m^2$ day의 초기 WVTR 값을 얻을 수 있었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.99-104
• /
• 2013

As a demand for the portable device requiring smaller size and better performance is in hike, reducing the size of conventionally used planar 2 dimensional integration circuit(IC) cannot be a solution for the enhancement of the semiconductor integration circuit technology due to an increase in RC delay among interconnects. To address this problem, a new technology of 3 dimensional integration circuit (3D-IC) has been developing. In this study, three-dimensional integrated device was investigated due to improve of reducing the size, interconnection problem, high system performance and functionality.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.64-69
• /
• 2002

Dynamic analysis of laminated beams with a embedded damping layer under tension or compression axial load is investigated. Improved Layer-Wise Zig-Zag Beam Theory and Interdependent Kinematic Relation using the governing equations of motion are incorporated to model the laminated beams with a damping layer and a corresponding beam zig-zag finite element is developed. Flexural frequencies and modal loss factors under tension or compression axial load are calculated based on Complex Eigenvalue Method. The effects of the axial tension and compression load on the frequencies and loss factors are discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.443-443
• /
• 2013

유기광전자소자는 아주 얇은 두께로 제작 가능하여 휘어지는 소자를 구현할 수 있다. 이런 장점 때문에 플렉서블 디스플레이, 플렉서블 태양전지 구현에 가장 적합한 소자로 각광받고 있다. 하지만 수분이나 산소에 의한 소자내의 유기물과 금속의 열화로 소자의 수명이 줄어들기 때문에 산소 및 수분 침투를 방지하는 봉지기술(encapsulation)이 필요하다. 본 연구는 원자층 증착법을 이용한 무기박막층과 분자층 증착법을 이용한 폴리머박막의 적층구조를 이용하여 유기소자에 적용할 수 있는 수분 투과 방지막을 제작하였다. 무기박막층으로는 trymethylaluminum (TMA)과 $H_2O$를 사용하여 $Al_2O_3$를 제작하였고 폴리머층으로는 TMA와 ethylene glycol를 사용하여 alucone박막을 제작하였다. 폴리머층으로 사용된 alucone박막의 X-선 광전자 분광 스펙트럼은 대기중 수분과 산소에 의한 화학결합구조의 변화를 보였지만, $Al_2O_3$와 적층구조로 사용되었을 때, 배리어특성을 증가시키고 휘어짐에 따른 보호막의 열화현상을 줄여줄 수 있는 것을 Ca-test를 통해 확인하였다. 이러한 현상은 alucone막을 적층함으로써 $Al_2O_3$를 침투한 소량의 수분과 산소가, alucone박막을 지나면서 다음 $Al_2O_3$ 층으로 침투하기 전까지의 경로를 늘려주기 때문이라 사료된다.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.219-226
• /
• 1994

In the comparison result of residual strain calculated from the load-strain curve under the repeated loading cycles, it was found that the larger the laminates is, the larger the stiffness of GFRP pipes under fatigue load is. This phenomenon is true until the fatigue failure. According to the S-N curves drawn by the regression analysis on the fatigue test results, the fatigue strength for percentage of the static ultimate strength increases by increasing the laminates of GFRP pipes. The fatigue strength for 2, 000, 000 repeated loading cycles In GFRP pipes with the laminates varing 15, 25, 35 shows 75.2%, 79.5%, 84.2% on the static ultimate strength, respectively.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.149-158
• /
• 1997

This paper presents the illustration of application under attached point mass to the special orthotropic plates with a pair of opposite edges simply supported and the other pair of opposite edges free. Design engineers need to calculate the natural frequencies of such elements but obtaining exact solution to such problems is very much difficult. Pretlove reported a method of analysis of beams with attached masses using the concept of effective mass. This method, however, is useful only for certain simple types of beam. Therefore, considering the method has been developed by D. H. Kim(1974) is simple, accurate, and very effective for the plates with arbitrary boundary conditions and irregular sections, this paper calculates the natural frequencies of composite laminated plate under attached point mass/masses.