• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.310-317
• /
• 2008

Although aerial LiDAR had been launched commercially several years ago, it is still difficult to study data acquisition conditions and effects with various datasets because of its acquisition cost. Thus, this research was performed to study data acquisition conditions and effects with virtually various datasets. For this research, 3D tree models and forest stand models were built to represent graded tree sizes and tree plantation densities. Also, a variable aerial LiDAR acquisition model was developed. Then, through controlling flight height parameter, one of the data acquisition parameters, virtual datasets were collected for various data acquisition densities. From those datasets, forest canopy volumes and maximum tree heights were estimated and the estimated results were compared. As the results, the estimated is getting closer to the expected during the data acquisition density increase. This research would be helpful to perform further studios on relations between forest inventory accuracy and LiDAR cost.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.551-556
• /
• 2018

In recent years, drones have been used to measure aircraft flights data and weather information. Related applications include the measure for low-altitude atmospheric data, the measure for atmospheric fine dust, and the measure for air pollution. However, the mounting position of the atmospheric measurement sensor should be mounted by considering the effects of propeller flow, the EMI effects, and the changes in the weight of the drone. Among these, the upper flow of the propeller affects the wind speed and direction, so the optimal position should be selected. This study deals with the proper height of the atmospheric data measurement sensor. Through the flow analysis, we study the flow characteristics of around a drone and suggest the proper sensor mounting height.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.211-215
• /
• 2021

It is estimated that there are 40 million people with AIDS worldwide, with most cases occurring mainly in developing countries. HIV, the virus that causes AIDS, is infected with CD4+ T cells in the blood and gradually destroys CD4+ T cells for several months to 10 years, thereby lowering the patient's immune function. AIDS patients who have weakened immunity in this way will die from various diseases. The current method for counting the number of CD4+ T cells is usually performed by flow cytometry. The flow cytometry method has the advantage of high accuracy, but it is difficult to use in developing countries because it requires skilled professionals and equipment is expensive. As a result of this study, a device for AIDS screening was developed by capturing leukocytes from a small amount of 5 ㎕ blood through a microfilter and analyzing CD4+ T cells and CD8+ T cells from the captured cells. cheaper and easier to carry and use than current test equipment.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.450-454
• /
• 2023

Chloride ions in the alloy powder used as flux in Flux Cored Arc Welding (FCAW) can cause pores on the bead surface of the welding metal to cause defects, or chloride remaining in the alloy powder can cause corrosion of the metal. Combustion-ion chromatography is mainly used to quantify the chloride ions in alloy powder, but there is a limitation in that the equipment is expensive and requires a high degree of expertise. Therefore, this study aims to find an easy and accurate quantification method in the field by comparing combustion-ion chromatography (C-IC), which is mainly used for chloride ion quantification of alloy powder, X-ray fluorescence analysis (XRF), and potentiometric titration. In this article, magnesium-aluminum alloy powder is applied to the quantification of chloride ions because it is most commonly used as flux. This study confirmed that potentiometric titration can be applied to the quantification of chloride ions in the alloy powder in the industry field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.2
• /
• pp.143-146
• /
• 1991

The present experiment was carried out to investigate the effects of direct sowing time culture of Perilla frutescens var. acuta KUPO on growth yield and it's components. The number of days from seeding to emergence was recognized linear negative correlation between seeding dates. Stem length was the longest in Apr. 1 seeding, and was short in the early, and the late seeding. Stem diameter was the thickest in Apr. 1 seeding, and was thin in the early, and the late seeding. Dry weight of leaf and stem was increased on Apr. 1 seeding. Grain yield was the highest in Apr. 1 seeding date. Therefore, optimum time for direct sowing was on Apr. 1.

• Journal of Bio-Environment Control
• /
• v.4 no.2
• /
• pp.223-231
• /
• 1995

Judicious control of high temperature is the most important task for a successful intensive - cultivation in greenhouses during the hot summer. Therefore, the climatological data at 31 locations in Korea were calculated using the modified model equation for ventilated in glasshouses during summer. Furthermore, the adequate number of air- changes or frequency of ventilation was estimated based on temperature settings, which is considered to be more active means of controlling summer glasshouse temperatures, was investigated. The major results can be summarized as follows: Forced ventilation of one air change per minutes was effective in maintaining the maximum air temperature below 35$^{\circ}C$ in the glasshouse haying 40% shading. It was impossible, however, to maintain air temperature below 3$0^{\circ}C$ in 40% shaded glasshouse with forced ventilation only.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.217-222
• /
• 2004

고도 정보화 사회의 진전으로 전기에너지의 소비는 급격히 증가하고 있다. 특히 업무용 빌딩과 같은 전력다소비 건물에서는 전력의 효율적 이용에 의한 에너지절감은 물론 설계 단계에서의 합리적인 전기설비 설계가 요청되고 있다. 현재 우리나라의 기후 특성과 전력소비 특성을 고려한 합리적인 전기설비 설계를 위한 기초 자료가 매우 미흡한 실정이다. 본 연구에서는 합리적인 수용률 기준을 설정하기 위하여 사무소용 빌딩의 전력 소비 특성을 조사 분석하였고, 아울러 전기설비설계사무소에서 적용하고 있는 수용률을 조사 분석하였다. 조사된 자료 전체의 특징과 중심적인 경향을 알아내기 위해서 평균값, 중앙값, 표준편차, 최대 값, 최소 값, 회귀모형식, 최소제곱 평균오차 등의 확률 통계적 파라미터들을 수용률 기준 설정을 위한 특징 파라미터로 선택하였다. 그리고, 데이터의 신뢰성을 비교 분석하기 위하여 선형적인 방법과 비선형적인 방법으로 그 경향을 추정하여 곡선으로 나타내었다. 이러한 방법에 의하여 얻어진 분석 자료를 이용하여 적정 변압기 용량 설정을 위하여 데이터베이스화하였고, 변전설비용량의 합리적인 설계를 위하여 수용률 기준 적용시에 필요한 자료로 활용할 수 있으리라 사료된다.

• The Microorganisms and Industry
• /
• v.10 no.1
• /
• pp.2-6
• /
• 1978

백신이란 학문의 원조는 고금 동서를 불문하고 영국의 Jenner라는 것은 우리가 잘아는 사실이다. 이것은 약 200년전의 일이며 그후 각종 전염병예방 백신이 개발되어 오늘날 우리인간은 예전ㅇ 비해 각종 전염병에 대해 큰 은혜를 받고 있는 셈이다.특히 1949년 미국의 Enders박사 일맥의 조직 배양의 개량법에 의한 바이러스의 대량 배양과 정제및 농축이 용이하게 된것은 백신생산 개발문제뿐만아니라 바이러스학과 전염병 예방학의 발전의 일대혁신을 가져왔으며 세균학에 있어서 Koch의 고형배제를 사용하여 많은 병원성세균의 발견을 하게된 것과 비슷한 느낌을 준다. Enders의 조직배양의 modern technique는 아직까지 원인불명인 여러 종류의 바이러스 전염병 병원체가 구명되었으며 지금도 계속 새로운 바이러스가 발견되고 있는 중이다. 그 대표적인 예를 들면 폴리오(Polio)를 중심으로 Coxsackie virus의 A및 B군과 ECHO virus등 장관계바이러스들의 발견과 그 체계적정비 그리고 Adeno virus를 위시한 호흡기계 바이러스들의 계속적인 발견과 그 실험실진단법의 확립등을 들수 있다. 한편 백신개발에 대한 확립 등을 들수있다. 한편 백신개발에 대한 발자취를 보면 폴리오를 위시하여 홍역(Measles)백신, 멈프스(Mumps)및 풍진 (Rubella virus) 백신등의 개발은 근래 선,후진국을 막론하고 이러한 전염병의 예방효과가 눈에 띠게 덕을 보고있는 것이다. 지금 세계적으로 많은 전염병의 병원체가 바이러스라는 것이 알려져 있고 또한 이에 대한 백신의 개발연구가 활발하게 진행되고 있다. 이번 기회에 바이러스백신의 전망이라는 제목을 가지고 논하게 된것을 기쁘게 생가하며 동시에 어려운 과제라고도 생각된다. 왜냐하면 아직 우리나라에서는 생산을 못하고 있는것이 많은데 그 전망을 말하기가 어려운 까닭이며 또한 제한된 지면에서 충분히 고찰하기는 어렵다. 우리나라에서 자주 거론되는 백신 및 종류에 국한하여 그 문제점과 앞으로의 전망을 고찰해 보기로 한다.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.43-53
• /
• 2005

This paper presents tile modeling of non-point source pollutants runoff and its desirable water environmental management to closed waterbody. To obtain spatially distributed environmental information, fro have used contour data to extract stream channels automatically and to divide networks of watershed. A Quasi Digital Elevation Model (DEM) has been developed, validated, and adopted to estimate the runoff of total nitrogen pollutant from watershed. The GIS-linked model can be applied effectively to the non-point source pollutants from watersheds considering water conditions in receiving waters. It will be useful to manage water environment in receiving waters.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.1
• /
• pp.87-91
• /
• 2013

Establish standards and review procedures for on-site implementation of the emergency response plan required to establish by substances requiring preparation for accidents. Investigated for the examination content and standards for Process Safety Management (PSM) and Safety Management System (SMS). Safety Management System operator's comments and problems to be expected in the review process. Standards for on-site implementation and review of a person's ability to do the job does not require a high level of expertise. However, it has been created mainly to determine whether appropriate items to be included in the report and the contents presented.