• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.791-800
• /
• 2021

Photographic images of the Samseong-version (三省本: Korea's Treasure No. 758-1) and the Gongin-version (空印本: Korea's Treasure No. 758-2) of Nammyeongcheon Hwasangsong Jeungdoga (南明泉和尙頌證道歌: Nanmingquan Song Zhengdaoge) were compared and analyzed to investigate the differences between the two versions. According to a report in 2012 at the time of the designation of the Gongin-version as Korea's treasure, both versions were printed from the same woodblocks. The Gongin-version is presumed to be a later print than the Samseong-version. The two versions are very similar in format and shape of border lines and characters. It is difficult to determine the differences with the naked eye, even for experts. In this study, based on the printing characteristics observed from each version through image analysis, useful evidence to determine whether it was printed using the same or different woodblocks and the order of printing was collected. As a result of careful image comparison and analysis, we concluded that the Samseong- and the Gongin-version were printed from different woodblocks, or possibly different typesetting. It was difficult to agree with the content of the report that the Gongin-version was a later print than the Samseong-version. In addition, it was noted that the Gongin-version print has characteristics quite different from the typical characteristics of woodblock printing seen in the Samseong-version. Additional investigations and follow-up studies on the printing technology used for Gongin-version print and the timing of printing are recommended.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.115-122
• /
• 1998

This paper presents the cyclic seismic performance of slip-critically designed, high-strength bolted-beam splice in steel moment frames. Before the moment connection reaching its ultimate plastic strength, unexpected premature slippage occurred at the slip-critically designed beam splice during the test. The experimentally observed frictional coefficients were as low as about 50% to 60% of nominal(code) value. Nevertheless, the bearing type behavior mobilized after the slippage transferred the increasing cyclic loads successfully, i.e., the consequence of slippage into bearing was not catastrophic to the connection behavior. The test result seems to indicate that the traditional beam splice design basing upon(bolt-hole deducted) effective flange area criterion may not be sufficient in developing the plastic strength of moment connections under severe earthquake loading. New procedure for achieving slip-critical beam splice design is proposed based on capacity design concept.

• Journal of Animal Science and Technology
• /
• v.48 no.1
• /
• pp.131-136
• /
• 2006

Research outputs of science and engineering fields including Life Sciences were analyzed using KOSEF's Database. The total number of Life Sciences scientists participating in KOSEF's Database was 7,413(33.1 percent), and during the latest five years(2001 to 2005), the number of articles published in SCI(Scientific Citation Index) journals and Non-SCI journals by them was 47,740(37.7 percent) and 72,115(39.9 percent), respectively. The average number of articles per capita published in SCI journals during the latest five years was 5.0 in Biology, 4.1 in Agricultural Sciences, and 7.5 in Medical Sciences. The average number of articles per capita published in SCI journals within Life Sciences was 12.1 in Pharmaceutical Chemistry, 10.3 in Allergy and Immunology, 10.0 in Physiology and Pharmacology, 9.7 in Anatomy and Cell Biology, in order. The results of this survey will be used as a reference in comparisons of research output between Life Sciences and other sciences both in quality and quantity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.78-83
• /
• 2014

This paper suggest an effective idea to implement an low area multi-mode one dimension transform block of HEVC(High Efficiency Video Coding). The time consuming multiplier path is designed to operate on low frequency. Normal multipliers dealing with variable operands are replaced with smaller constant multipliers which do the product with constant coefficient and variable only using shifters and adders. This scheme increases total multiplier counts but entire areas are reduced owing to smaller area of constant multiplier. Idle cycles caused by doubled multipliers enable to use multi-cycle paths on the cycle eating multiplier data path. Operating frequency is lowered by multi-cycle path but total throughput is maintained. This structure is implemented with TSMC 0.18 CMOS process library, and operated on 186MHz frequency to process a 4k($3840{\times}2160$) image. Max operating frequency is 300MHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.734-736
• /
• 2012

Cadmium telluride (CdTe) films have been prepared on Corning 7059 glass, molybdenum (Mo), and polyimide (PI) substrates by r.f. magnetron sputtering technique. The influence of the sputter pressure on the structural and optical properties of these films was evaluated. In addition, a comparison of the properties of the films deposited on fferent substrates was performed.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.555-561
• /
• 2014

Artificial intelligence in the game is mainly used to determine patterns of behavior of NPC (Non Player Character) and the enemy, path finding. These artificial intelligence is implemented by FSM (Finite State Machine) or Flocking method. The number of NPC behavior in FSM method is limited by the number of FSM states. If the number of states is too small, then NPC player can know the behavior patterns easily. On the other hand, too many implementation cases make it complicated. The NPC behaviors in Flocking method are determined by the leader's decision. Therefore, players can know easily direction of movement patterns or attack pattern of NPCs. To overcome these problem, this paper proposes agonistic behaviors(attacks, threats, showing courtesy, avoidance, submission)in animals to apply for the NPC, and implements agonistic behaviors using Unity3D engine. This paper can help developing a real sense of the NPC artificial intelligence.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.4
• /
• pp.297-305
• /
• 2018

The role of UCAV is to carry out various missions in hostile situations such as penetration and attack on the enemy territory. To this end, application of RF stealth technology is indispensable so as not to be caught by enemy radar. The X-47B UCAV with blended wing body configuration is a representative aircraft in which modern RCS reduction schemes are heavily applied. In this study, a model UCAV was first designed based on the X-47B platform and then an extensive RCS analysis was conducted to the model UCAV in the high-frequency regime using the Ray Launching Geometrical Optics (RL-GO) method. In particular, the effects of configuration of UCAV considering IR reduction on RCS were investigated. Finally, the effects of RAM optimized for the air intake of the model UCAV were analyzed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.211.1-211.1
• /
• 2015

최근 용액 공정을 이용한 산화물 반도체에 대한 연구가 활발히 진행되고 있다. 넓은 밴드갭을 가지고 있는 산화물 반도체는 높은 투과율을 가지고 있어 투명 디스플레이에 적용이 가능하다. 기존의 박막 진공증착 방법은 진공상태를 유지하기 위한 장비의 가격이 비싸며, 대면적의 어려움, 높은 생산단가 등으로 생산율이 높지 않다. 하지만 용액 공정을 이용하면 대기압에서 증착이 가능하고 대면적화가 가능하다. 그리고 각각의 조성비를 조절하는 것이 가능하다. 이러한 장점에도 불구하고, 소자의 신뢰성이나 저온공정은 중요한 이슈이다. Instability는 threshold voltage (Vth)의 shift 및 on/off switching의 신뢰성과 관련된 parameter이다. 용액은 소자의 전기적 특성을 열화 시키는 수분 과 탄소계열의 불순물을 다량 포함 하고 있어 고품질의 박막을 형성하기 위해서는 고온의 열처리가 필요하다. 기존의 열처리는 고온에서 장시간 이루어지기 때문에 유리나 플라스틱, 종이 기판의 소자에서는 불가능하지만 $100^{\circ}C$ 이하의 저온 공정인 microwave를 이용하면 유리, 플라스틱, 종이 기판에서도 적용이 가능하다. 본 연구에서는 산화물 반도체 중에서 InGaZnO (IGZO)를 용액 공정으로 제작한 juctionless thin-film transistor를 제작하여 기존의 열처리를 이용하여 처리한 소자와 microwave를 이용해서 열처리한 소자의 전기적 특성을 한 달 동안 관찰 하였다. 또한 In:Zn의 비율을 고정한 후 Ga의 비율을 달리하여 특성을 비교하였다. 먼저 p-type bulk silicon 위에 SiO2 산화막이 100 nm 증착된 기판에 RCA 클리닝을 진행 하였고, solution InGaZnO 용액을 spin coating 방식으로 증착하였다. Coating 후에, solvent와 수분을 제거하기 위해서 $180^{\circ}C$에서 10분 동안 baking공정을 하였다. 이후 furnace열처리와 microwave열처리를 비교하기 위해 post-deposition-annealing (PDA)으로 furnace N2 분위기에서 $600^{\circ}C$에서 30분, microwave를 1800 W로 2분 동안 각각의 샘플에 진행하였다. 또한, HP 4156B semiconductor parameter analyzer를 이용하여 제작된 TFT의 transfer curve를 측정하였다. 그 결과, microwave 열처리한 소자의 경우 기존의 furnace 열처리 소자와 비교하여 높은 mobility, 낮은 hysteresis 값을 나타내었으며, 1달간 소자의 특성을 관찰하였을 때 microwave 열처리한 소자의 경우 전기적 특성이 거의 변하지 않는 것을 확인하였다. 따라서 향후 용액공정, 저온공정을 요구하는 소자 공정에 있어 열처리방법으로 microwave를 이용한 활용이 기대된다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.155-161
• /
• 2008

The flood damage shows different types in natural river watershed and in urban drainage watershed. In recent, increasing of the impervious area gives rise to short concentration time and high peak discharge comparing with natural watershed and it is a cause of urban flood damage. In this paper, we use a XP-SWMM model developed based on EPA-SWMM version for analyzing the inundation area, inundation depth and inundation area considering building effect. The two events(2005.06, 2005.07) has been used for the validation of model. HEC-RAS model has been applied for simulation of changing water level, and the results has been used for calculating area of the inundation. The observed inundation area(21.41 ha) in August, 1998 was in good agreement with the simulated value(23.45 ha) of XPSWMM model. An influence of inundation area considering building effects has been analized by the DTM of XP-SWMM model.

• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.589-598
• /
• 2004

From the continuous long-term rainfall-runoff standpoint, the urbanization within a watershed causes land use change due to the increase in impervious areas, the addition of manmade structures, and the changes in river environment. Therefore, rainfall-runoff characteristics changes drastically after the urbanization. Due to these reasons, there exists the demand for rainfall-runoff simulation model that can quantitatively evaluate the components of hydrologic cycle including surface runoff, river flow, and groundwater by considering urban watershed characteristics as well as natural runoff characteristics. In this study, continuous long-term rainfall-runoff simulation model SWAT-SWMM is developed by coupling semi-distributed continuous long-term rainfall-runoff simulation model SWAT with RUNOFF block of SWMM, which is frequently used in the runoff analysis of urban areas in order to consider urban watershed as well as natural watershed. The coupling of SWAT and SWMM is described with emphasis on the coupling scheme, model limitations, and the schematics of coupled model.