• 융합신호처리학회논문지
• /
• 제23권4호
• /
• pp.185-193
• /
• 2022

본 논문은 쿼드로터 무인기의 위치 및 자세 추적 제어 성능을 향상시키기 위해 RBFNN 방식을 이용한 적응형 슬라이딩 모드 제어를 제안한다. RBFNN은 UAV 동적 모델에서 비선형 함수의 근사화에 활용되며, RBFNN의 가중치는 슬라이딩 표면에 부딪혀 미끄러지는 상태를 보장하기 위해 Lyapunov 안정성 분석의 적응 법칙에 따라 온라인으로 조정된다. 네트워크 근사 오류를 보상하고 기존 채터링 문제를 제거하기 위해 슬라이딩 모드 제어 항은 적응 법칙에 의해 조정되어 시스템의 강력한 성능을 향상시킨다. 제안된 제어 방법의 시뮬레이션 결과는 비선형 쿼드로터 무인 항공기에 적용된 제안된 제어기의 효율성을 확인하였다. 그 결과, 제안된 제어 시스템이 만족스러운 제어 성능과 견고성을 달성함을 알 수 있었다.

• 드라이브 ㆍ 컨트롤
• /
• 제15권3호
• /
• pp.8-13
• /
• 2018

This paper presents a phase portrait analysis-based safety control algorithm for excavators, using adaptive sliding mode control. Since working postures and material types cause the excavator's rotational inertia to vary, the rotational inertia was estimated, and this estimation was used to design an adaptive sliding mode controller for collision avoidance of the excavator. In order to estimate the rotational inertia, the recursive least-squares estimation with multiple forgetting was applied with the information of the swing velocity of the excavator. For realistic evaluation, an actual working scenario-based performance evaluation was conducted. Based on the estimated rotational inertia and an analysis of estimation errors, sliding mode control inputs were computed. The actual working scenario-based performance evaluation of the designed safety algorithm was conducted, and the results showed that the developed safety control algorithm can efficiently avoid a collision with an object in consideration of rotational inertia variations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.141-143
• /
• 2007

본 논문은 매입형 영구자석 동기전동기의 속도 센서리스의 제어 방법에 관한 것이다. 매입형 영구자석 동기전동기의 센서리스 구동을 위하여 적응 적분바이너리 관측기와 적응 슬라이딩 모드 관측기를 이용하였다. 두 관측기의 성능 비교를 위하여 매입형 영구자석 동기전동기의 고정자 전압방정식으로부터 각각 관측기를 구성하였고, 동일한 시스템에서의 실험을 통하여 관측기의 성능을 비교하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.71-80
• /
• 2009

The response characteristics of EHA systems are sensitive to the temperature change of working fluid because the temperature of working fluid causes the variation of system parameters such as effective bulk modulus and viscous friction coefficient. In this paper, a precise position control of EHA system using the adaptive sliding mode control system is suggested. The adapted system parameters such as effective bulk modulus and viscous friction coefficient can be used for monitoring failures in the EHA system which has potential applications in the industrial fields. Not only the accuracy of adapted system parameters but also the improved performance and robustness in a given reference position of the cylinder are verified by computer simulation using AMESim software.

• 자동차안전학회지
• /
• 제13권1호
• /
• pp.14-25
• /
• 2021

This paper presents a RLS based adaptive sliding mode observer (A-SMO) for unknown fault reconstruction in longitudinal autonomous driving. Securing the functional safety of autonomous vehicles from unexpected faults of sensors is essential for avoidance of fatal accidents. Because the magnitude and type of the faults cannot be known exactly, the RLS based A-SMO for unknown acceleration fault reconstruction has been designed with relationship function in this study. It is assumed that longitudinal acceleration of preceding vehicle can be obtained by using the V2V (Vehicle to Vehicle) communication. The kinematic model that represents relative relation between subject and preceding vehicles has been used for fault reconstruction. In order to reconstruct fault signal in acceleration, the magnitude of the injection term has been adjusted by adaptation rule designed based on MIT rule. The proposed A-SMO in this study was developed in Matlab/Simulink environment. Performance evaluation has been conducted using the commercial software (CarMaker) with car-following scenario and evaluation results show that maximum reconstruction error ratios exist within range of ±10%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.221-222
• /
• 2007

본 논문에서는 초정밀 위치 결정 시스템에서 보다 정확한 제어를 위한 새로운 제어기를 설계한다. 외란을 고려한 시스템의 경우, 환경이 달라질 때마다 측정 노이즈를 정확하게 알아내기란 쉽지 않다. 따라서 측정 장치의 정확성을 나타낼 수 있도록 칼만 필터추정기와 퍼지 이론을 이용하여 정확한 측정 오차값을 구한다. 이때, 파라미터 불확실성과 의란에 강인한 제어를 위해 슬라이딩 모드 제어기와 LQ 최적 제어기가 적용된다. 최종적으로, 제안된 제어기와 시간 최적 제어기의 성능비교를 통하여 보다 강인하고 안정된 성능개선을 증명한다.

• 제어로봇시스템학회논문지
• /
• 제22권5호
• /
• pp.315-319
• /
• 2016

This paper proposes a simple adaptive sliding mode control algorithm for controlling a permanent magnet synchronous generator (PMSG) of a MW-class direct-driven wind turbine system. The proposed adaptive sliding mode controller does not require accurate knowledge of the PMSG parameter or turbine torque values. The proposed controller can accurately track the reference angular speed computed by the maximum power point tracking(MPPT) algorithm. Finally, this paper gives Matlab/Simulink simulation results to verify the practicality and effectiveness of the proposed adaptive sliding mode controller.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.69-76
• /
• 2009

This paper describes sensorless high-speed control for 45,000rpm/22kw type PMSM by using iterative adaptive sliding mode observer. The proposed algorithm is based on sensorless vector control by on-line estimating the speed of rotor in the wide speed operating range between the starting operation. In addition, it shows the enhanced performance of the iterative adaptive observer by lessening its chattering and getting stable response in limited PWM period. The simulation and experiment results show the reliable performance of the proposed algorithm through starting to high speed operating range.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.173-179
• /
• 2003

In this paper, a real-time multibody vehicle dynamics and control model has been developed for a virtual reality intelligent vehicle simulator. The simulator consists of low PCs for a virtual reality visualization system, vehicle dynamics and control analysis system a control loading system, and a network monitoring system. Virtual environment is created by 3D Studio Max graphic tool and OpenGVS real-time rendering library. A real-time vehicle dynamics and control model consists of a control module based on the sliding mode control for adaptive cruise control and a real-time multibody vehicle dynamics module based on the subsystem synthesis method. To verify the real-time capability of the model, cut-in, cut-out simulations have been carried out.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.89-99
• /
• 2008

In this paper, the position tracking control problem of the servo system with nonlinear dynamic friction is issued. The nonlinear dynamic friction contains a directly immeasurable friction state variable and the uncertainty caused by incomplete parameter modeling and its variations. In order to provide the efficient solution to these control problems, we propose the composite control scheme, which consists of the robust friction state observer, the FNN approximator and the approximation error estimator with sliding mode control. In first, the sliding mode controller and the robust friction state observer is designed to estimate the unknown internal state of the LuGre friction model. Next, the FNN estimator is adopted to approximate the unknown lumped friction uncertainty. Finally, the adaptive approximation error estimator is designed to compensate the approximation error of the FNN estimator. Some simulations and experiments on the servo system assembled with ball-screw and DC servo motor are presented. Results show the remarkable performance of the proposed control scheme. The robust friction state observer can successfully identify immeasurable friction state and the FNN estimator and adaptive approximation error estimator give the robustness to the proposed control scheme against the uncertainty of the friction parameters.