• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.42-53
• /
• 2011

This study is to present a method of compiling consistently accurate construction cost estimates in minimum of time. There are two kind of applications for estimating system based on quantity-per-unit and the daily work-crew. The former system is still applied 45% as a estimating method to construction job site by the second half of 2010. However, it is necessary for quantity-per-unit to complement the defect of standard integrating specification and improve the integrating method to the various construction conditions. The later system is intended to represent a standard or basic core which can be adopted in many type of construction estimating used across the wide variety of construction in advanced countries. In this study daily work-crew based on productivity is applied to the representative B.O.Q Item in road project. These results are compared to productivity of Japan and U.S.A estimated under the similar circumstances.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.217-221
• /
• 2005

박물관에 전시된 유물의 관람을 위해서는 조명이 요구되며, 조명에서 제공되는 가시광선, 자외선 및 자외선에 의해 손상을 입을 수 있다. 조명에 의한 손상을 방지하기 위해서 손상의 원인을 완벽히 제거한다는 것은 기술적, 실용적으로 쉽지가 않다. 따라서 손상의 원인을 완벽히 제거하기보다는 적절한 조명기준 등을 정하여 손상의 최소화를 위한 노력이 실질적인 수단이라 생각된다. 본 연구에서는 우리나라 중앙박물관의 박물관의 전시조명기준에 의거한 유물의 등급별 적산조도 등의 설정 기준에 따른 적용방법과 유지관리 방안 등을 제안하였다.

• Bulletin of Korea Environmental Preservation Association
• /
• v.29 s.367
• /
• pp.42-46
• /
• 2007

최근 수질환경보전법의 개정법률(안)에 의거하여 폐.하수종말처리장에 수온, pH, 생물학적산소요구량(BOD), 화학적산소요구량(COD), 총질소(TN), 총인(TP) 및 부유물질(SS)의 자동으로 측정할 수 있는 수질자동측정기의 부착이 의무화될 예정에 있다. 그러나, 현재 전국적으로 화학적산소요구량 측정장비와 같이 일부 항목에 대한 자동측정장치는 설치.운영 중인 곳이 많이 있으나, 수질 TMS 설치 규정에 나와 있는 전 항목을 측정할 수 있는 장비가 설치되어 운영하는 곳은 극히 일부에 불과한 실정이다. 따라서, 수온, pH, 화학적산소요구량(COD), 총질소(TN), 총인(TP), 부유물질(SS) 자동측정 장치를 설치하고, 무선통신(CDMA) 방식을 이용하여 '방류수 수질 원격감시체계(TMS) 시범 운영'을 통하여, 측정 장비들에 대한 자료의 정확성, 신뢰성을 파악하여 설치될 장비들에 대한 성능을 사전에 평가하고, 수질 TMS 시스템에 대한 현장 적응 능력 및 안정성을 파악하여 실질적으로 운영되는 시점에 좀 더 정확하고 실용적인 시스템을 적용하고자 한다.

• Conservation Science in Museum
• /
• v.28
• /
• pp.51-64
• /
• 2022

This study aims to identify the impact of optical energy on cultural properties when the light energy irradiates cultural assets during augmented reality (AR) or media façade performances as activities designed to garner public interest. The 10-story Gyeongcheonsa Pagoda was used for this study, and the impact was evaluated by comparing the optical energy irradiated during a media façade performance with the energy irradiated under normal conditions. For comparison, this study measured the illuminance in lux for each light source that irradiated the ten-story stone pagoda and used the data to calculate illuminance in lux-hours. The results showed that the pagoda receives 786.4 lux per hour when both sunlight and artificial light are present, while 13.2 lux of energy is irradicated by the media façade for each performance. The result indicates that the pagoda receives about 29.8 times more optical energy from sunlight and artificial light sources than during media façade performances on an hourly basis, when the performance is carried out twice a week. This study therefore concludes that the optical energy of media façade performances inflicted trivial damage to the ten-story stone pagoda.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.2
• /
• pp.122-125
• /
• 1990

Pearl millet (Pennisetum americanum (L.) Leeke) has been detected as an excellent and new forage crop in Korea. Thus the objective of the study was to determine optimum planting season, growing degree days and productivity by shifting the planting season of pearl millet. Days to emergence of Australia pearl millet inbred line were shortened from 12 days to 3 days by delaying planting season from April 15 to July 15 in Suwon, 1986, but their growing degree days remained relatively constant 32.1$^{\circ}C$ in average. Days to heading also were shortened from 96 days to 54 days by shifting the planting season, but their growing degree days varied little being 697$^{\circ}C$ in average. For grain crop, economic planting season was from early May to late June, and their harvest index also did not varied much, but suddenly reduced in the July 15 planting plot. For forage crop, economic planting season was from mid-May to mid-June with optimum planting time of mid-May. Particularly, when planted in early July, 1987 and 1988, green fodder yields of Suwon 1 pearl millet hybrid were very low being 54 percent as compared with optimum planting season's yield 10.8t/10a.

• Environmental engineer
• /
• v.23 s.244
• /
• pp.56-60
• /
• 2006

최근 수질환경보전법의 개정법률(안)에 의거하여 폐 · 하수종말처리장에 수온, pH, 생물학적산소요구량(BOD), 화학적산소요구량(COD), 총질소(TN), 총인(TP) 및 부유물질(SS)의 자동으로 측정할 수 있는 수질 자동측정기의 부착이 의무화될 예정에 있다. 그러나, 현재 전국적으로 화학적산소요구량 측정장비와 같이 일부 항목에 대한 자동측정장치는 설치 · 운영 중인 곳이 많이 있으나, 수질 TMS 설치 규정에 나와 있는 전 항목을 측정할 수 있는 장비가 설치되어 운영하는 곳은 극히 일부에 불과한 실정이다. 따라서, 수온, ph, 화학적 산소요구량(COD), 총질소(TN), 총인(TP), 부유물질(SS) 자동측정 장치를 설치하고, 무선통신(CDMA)방식을 이용하여 ‘방류수 수질 원격감시체계(TMS) 시범 운영'을 통하여, 측정 장비들에 대한 자료의 정확성, 신뢰성을 파악하여 설치된 장비들에 대한 성능을 사전에 평가하고, 수질 TMS 시스템에 대한 현장 적응 능력 및 안정성을 파악하여 실질적으로 운영되는 시점에 좀 더 정확하고 실용적인 시스템의 적용하고자 한다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.280-285
• /
• 2012

This study was conducted to establish proper milling condition and harvesting time for improving the milling recovery of head foxtail millet grain. Brown foxtail millet recovery and the percentage of head foxtail millet recovery were significantly different according to the number of hulling and milling time. Also, the interaction of these factors had influence on brown foxtail millet recovery and the percentage of head foxtail millet recovery. To improve the percentage of head foxtail millet recovery, it was effective to hull grain twice and mill for 1.30 minute. 1000-grain weight of brown foxtail millet, brown foxtail millet recovery, hardness of brown foxtail millet, milling recovery, and the percentage of milling recovery of head foxtail millet grain were significantly different according to harvesting day after heading. For improving the ratio of ripened grain and the percentage of recovery of head foxtail millet, it is recommended to harvest 45 days (accumulated temperature : $1,148^{\circ}C$) after heading (DAH) in early maturing Hwangkeumjo, 50 DAH (accumulated temperature : $1,150^{\circ}C$) in mid-late maturing Samdamae and Kyeongkwan1, and 55 DAH (accumulated temperature : $1,168^{\circ}C$) in late maturing Samdachal.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.6
• /
• pp.468-472
• /
• 2001

In order to know the relationship between the accumulated temperature distribution and barley growth characteristics, average, early and late heading years were analyzed. Among 24 year's crop situation test 1976, 1979, 1989, 1990, 1998 were sorted to early heading years and 1977, 1980, 1984, 1996 to late heading years. About $650^{\circ}C$ of accumulated temperature from October to December was enough to get average year's heading date in barley. While 62$0^{\circ}C$ of accumulated temperature were not enough for average heading, 67$0^{\circ}C$ of accumulated temperature accelerated barley heading. 78$0^{\circ}C$ of accumulated temperature from October to February, were enough to get average year's heading date in barley. while $650^{\circ}C$ of accumulated temperature were not enough to, 78$0^{\circ}C$ of accumulated temperature accelerated barley heading. Temperature pattern types in early heading years were distinguished by three types : high temperature type before winter(I), high temperature type in winter-regrowth stage(II), high temperature type in tillering stage(III). On the other hands, temperature pattern types in late heading years were divided to two types : low temperature type in winter-regrowth stage(I), low temperature type in tillering stage(II). Barley heading was mainly influenced by temperature before winter and winter-regrowth stage. Yields of early heading years were higher than that of late heading years and yield was heavily influenced by the number of spikes per square meter.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.3
• /
• pp.121-128
• /
• 2010

This study aims to make improvements to the standard estimation process used to estimate reasonable costs for construction work, and to suggest a work crew based estimation using a new cost estimation model. In addition, work crew shift combination and construction process were systematically organized in order to improve the estimation technique and the construction capability of the cement liquid waterproofing work for apartment buildings. In addition, in terms of manpower and productivity, analyses were performed on the cement liquid waterproofing work for apartment buildings with net areas between $84-85m^2$ and $125-184m^2$, and the results were then compared with those calculated using the conventional work-crew based estimation method. Through this study, when the results of this study and those calculated by the conventional method were compared, for apartments with the net area of $84-85m^2$, the differences between specialists were shown to be 1.91 times to 2.13 times on average, while they were 8.82 times to 9.52 times between normal workers on average. For apartments with the net area of $125-184m^2$, the differences betweenspecialists were shownto be 1.89 times to 2.07 times on average, and 8.57 times to 9.38 times on average between normal workers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.20
• /
• pp.95-99
• /
• 1975

Flowering of the sunflower varieties tested was accelerated by growing in the green-house as well as by short-day treatments at 8 or 12 hours. It may be concluded that the sun-flower plant is sensitive to short-day condition. Significant difference was observed between the , early and late maturing varieties in the flowering response to temperature treatment. Varietal difference, however, was not recognizable in the flowering response to the short-day treatment.