콘크리트의 강도발현을 양생온도와 재령의 함수로 나타내는 적산온도 방법은 시멘트 콘크리트의 강도추정에 폭넓게 사용되어 왔다. 본 연구에서는 열경화성인 불포화 폴리에스터 수지를 결합재로 한 경량 폴리머 모르터를 대상으로 하여 적산온도법에 의한 초기강도 추정방법을 구명하였다. 폴리머 모르터의 압축강도는 가사시간 및 강도발현성에 영향을 미치는 촉매 및 촉진제 첨가량을 변화시켜 실험하였으며, 또한 적산온도 이론식에 사용되는 기준온도를 산출하였다. 적산온도는 추정된 기준온도를 적용시킨 적산온도 이론식에의해 산출하였으며 경량폴리머 모르터의 압축강도는 적산온도-압축강도의 관계로부터 추정할 수 있었다. 이 연구에서 얻어진 적산온도법에 의한 경량 폴리머 모르터의 강도추정식은 열경화성 수지를 이용한 각종 폴리머 모르터나 콘크리트에도 적용가능할 것으로 판단된다.
현재 국내에서는 후분양제도 도입등에 따라 공기단축이 중요관점으로 대두되고 있다. 철근콘크리트 공사에서 공기단축을 위해서는 콘크리트 타설 후 탈형시기가 매우 중요하게 작용하게 되는데 이를 위해 거푸집 탈형을 위한 조기압축강도 특성을 비파괴 시험 중 하나인 적산온도법을 일부 적용하고 있다. 적산온도법은 온도와 재령과의 관계로 압축강도를 추정하는 방법으로, 플라우만에 의해 한중기 매스콘크리트의 구조물강도를 예측하고자 연구된 것이다. 따라서, 조기압축강도양상과는 다소 다른 결과를 보일 수 있다. 또한 적산온도법은 시멘트의 종류 그리고 배합 등에 따라 온도의 영향이 다르게 적용될 수 있으므로, 이에 대한 연구가 필요한 실정이다. 따라서 본 실험적 연구에서는 조기강도 예측을 위해 결합재 OPC100%와 OPC80+BSC20%에 대해 W/B비를 32, 35, 38, 40%로 다양화하여, 양생환경을 온도 20도씨와 25도씨에 12, 14, 16, 18, 20, 22, 24, 36시간 동안 양생한 후 압축강도를 측정한 결과를 바탕으로 현재 국내에서 주로 사용하고 있는 적산온도법을 적용하여 그 상관관계를 살펴보도록 한다.
가루깍지벌레 월동안 부화시기 예찰모형을 수립하기 위하여 월동알에 대한 온도발육 실험이 수행된다. 5개온도(10, 15, 20, 25, 27$^{\circ}C$)와 채집시기별로 월동알 부화기간을조사하여 비교분석하였다. Wagner 등 (1984a)의 비선형발육모형이 온도별 평균발육률에 대하여 적용되었으며 ($R^2$=0.9729). 발육영점온도는 15~$25^{\circ}C$ 영역에서 얻은 직선회귀식에 의하여 $11.9^{\circ}C$로 추정되었으며, 발육완료를 위해서는 154.14일도가 필요하였다. 적산온도 모형과 발육률전산(Wagner 등 1985) 모형이 부화시기 예측에 이용된다. 적산온도 모형은 평균온도에서 발육영점온도 이상의 온도를 적산하는 방법(Mean-minus-base 추정법), Sine wave 추정법(Allen 1976), 그리고 Rectangle 추정법(Arnold 1960)을 잉요하여 계산하였다. 50% 부화예측일을 실측일과 비교한 결과 적산온도를 이용하는 경우 Mean-minus-base 추정법은 18~28일, Sine wave 추정법은 11~14일, 그리고 Rectangle 추정법은 3~5일의 편차를 보였고, 발육률 적산모형은 2~3일의 편차가 있었다.
Prediction of compressive strength of concrete by Maturity Method is applied in construction site. However, due to the use of wired type high-priced equipment, economic efficiency and workability are falling. In this study, a newly developed concrete embedded wireless sensor is used to perform a mock-up test. Next, the concrete compressive strength of the Maturity Method is predicted using Saul and Plowman's function as measured temperature data. The predicted concrete strength at the beginning of the age was the actual strength and stiffness, but the error rate was less than 1% at 28th day.
The mechanical and durability characteristics of concrete structures depend on the construction environment, material conditions, design conditions, and temperature and humidity environment after casting. However, wired communicati-on sensors which are mainly used in the field have many limitations in their usability and monitoring. In this study, all temperature and humidity data measured from embedded sensors are monitored via a wireless sensor network. Based on the measured temperature data, the predicted compressive strength of the concrete was compared with the actual compressive strength. As a result, The error between predicted strength and experimental strength has decreased over time.
The objective of this study are to compare the development of compressive strength of epoxy mortars used as repairing materials with respect to maturity , and to propose a model predicting strength development of epoxy mortars. A series of tests are carried out for the hardener contents of 30, 40 and 50 percentage of epoxy resin and compressive strengths are measured at the age of 6, 12, 24, 72, 120 and 168 hours respectively under the cure temperature of 0, 10, 20 and 3$0^{\circ}C$. The datum temperature is estimated by measured strengths, and the maturity is calculated with the estimated datum temperature. The compressive strength of epoxy mortars can be predicted by regression analysis from the maturity-compressive strength relationship.
Recently, as blast furnace slag concrete has become widely used, managing the strength of concrete has become important. mSn is a method of correcting the difference in strength between standard cured specimens and concrete exposed to changes in temperature. In this study, the predicted strength based on the maturity of the central and outer parts of the blast furnace slag concrete structure is compared with the actual strength measured through coring. As a result, the actual strength difference between the center and the outer part of the concrete mixed with blast furnace slag was larger than the predicted strength difference.
본 연구에서는 채엽시기가 서로 다르며, 유효적산온도가 높았던 2010년도 녹차와 유효적산온도가 낮았던 2011년도 녹차를 가지고 HS-SPME법을 이용해 휘발성 향기성분을 포집, 흡착한 후 GC-FID와 GC-MS를 이용하여 유리 및 결합형 향기성분을 분리 동정하였다. 채엽시기와 상관없이 6종(${\alpha}$-methylbutanal, pentanal, (E)-2-hexen-1-ol, ${\beta}$-linalool, geraniol, ${\alpha}$-farnesene)의 유리형 향기성분이 공통적으로 동정되었으며, 유효적산온도가 낮았던 녹차의 총 향기성분은 유효적산온도가 높았던 녹차보다 3배 이상 크게 감소하였다. 결합형 향기성분 역시 유효적산온도가 낮았던 녹차에서 그 존재량이 적었으며, 공통적으로는 (Z)-3-hexen-1-ol, ${\beta}$-linalool, benzaldehyde, geraniol, (Z)-3-hexenyl acetate가 확인되었다. (Z)-3-hexen-1-ol은 유효적산온도가 높았던 2010년 5월에 수확한 녹차에 가장 많이 존재하였으며, bezaldehyde는 2010년 7월에 수확한 녹차와 유효적산온도가 낮은 2011년 7월에 수확한 녹차 순으로 많이 존재하였다. 본 실험을 통해 녹차의 유리 및 결합형 향기성분이 재배기간 중 동절기 저온에 의한 영향을 받는다는 것을 확인하였다.
The objectives of this study were to compare the development of compressive strength of epoxy resin mortars used as repairing materials with respect to maturity, and to propose a predictive model for strength development of epoxy resin mortar. A series of tests were carried out for the hardener contents of 30, 40 and 50 percentage of resin and compressive strength were measured at the of 6, 12, 24, 72, 120 and 168 hours respectively under temperature of 0, 10, 20 and 3$0^{\circ}C$. The datum temperature was estimated by measured strength, and the maturity is calculated with the estimated datum temperature. The compressive strength of epoxy resin mortar could be predicted by regression analysis from the maturity-compressive strength relationship.
본 논문에서 훈춘 농업개발을 위하여 농업생산의 기본 자료인 토양자원에 대하여 평가하고 개발 이용에 대한 평가 방법은 여러 가지가 있지만 본 논문에서는 지수-등급법을 사용하여 훈춘시 토양자원의 등급을 확정했다. 지수 항목에서는 일반적으로 통용하는 항목 외에 적산온도, 토양생산성능을 증설했고 지수 설정에서는 부동한 항목에 대하여 부동한 지수를 주였다. 토양자원의 등급획분에서는 계산한 지수의 대소에 따라 4등 6급으로. 나누어 토양의 비옥성과 작물배치의 적합성을 종합적으로 개괄했고 토양 이용 방향에 대해 제시했다.(중략)
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.