• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.455-459
• /
• 2002

The transport and optical properties of $In_2O_3$:Zn(IZO) thin films grown by DC magnetron sputtering deposition have been studied. The deposition temperatures ($T_s$) were varied from room temperature to $400^{\circ}C$ in $50^{\circ}C$ steps. The IZO films are an amorphous phase for $T_s$<$300^{\circ}C$ and polycrystalline phase for $350^{\circ}C$＜$T_s$. In contrast to ordinary films, amorphous IZO films have lower resistivity and higher optical transmittance than polycrystalline IZO films. The resistivity of amorphous IZO was in the range of 0.29~0.4 m$\Omega$cm and that of polycrystalline IZO was in the range of 1~4 m$\Omega$cm. The carrier type for IZO film was found to be n-type, and the carrier density, was $3~5{\times}10^{20}/cm^3$. The Hall mobility, $({\mu}_H)$, was 20~$50\textrm{cm}^2$/V.sec. The predominant scattering mechanisms in both amorphous and polycrystalline IZO films were believed to be ionized impurity scattering and lattice scattering. The visible transmittance of the IZO films, which decreases with an increase of TS, was above 80%.

• Journal of Sericultural and Entomological Science
• /
• v.21 no.1
• /
• pp.36-44
• /
• 1979

Those studies were examined rearing two varieties on Japanese descent and two varieties of Chinese descent by feeding polluted mulberry leaves, non-polluted ones and water-cleaned ones respectively to find effects of air-pollution on the economic characters of silkworms and analysis of contents of Sulphur and Cadmium in the mulberry leaves and silkworms as followings; 1) Japanese descent of polluted part was delayed about 2.5 days than non-polluted part, Chinese descent was delayed about 4 days or inequal and water-cleaned part was medium in the silkworm larval duration. 2) Results of maximum weight of 5th instal, cocoon layer weight and cocoon weight were decreased in due order non-polluted, water-cleaned and polluted in the factors of mulberry 3) Pupal ratio of Japanese descent was not shown statistical significance, but Chinese descent was revealed it obviously in the factors of mulberry leaves. 4) In the resistance of polluted mulberry leaves, Chinese descent was feeble obviously than Japanese and there were some difference even through among the same varieties. 5) The content of S and Cd of polluted area mulberry leaves was increased about 30% respectively than non-polluted area. 6) The fed part of non-polluted mulberry leaves was S 0.41% and Cd 0.013 ppm water-cleaned part was S 0.47% and Cd 0.024 ppm and polluted part was S 0.52% and Cd 0.042 ppm in the contents of S and Cd of silkworm larvae. 7) The contents of S and Cd didn't make visible injury in mulberry leaves but made it seriously in silkworm larvae. 8) The injury of dust on mulberry leaves was more serious than that of quality of mulberry leaves by air-pollution in the economic characters of silkworm. 9) As above results, Chinese descent should avoid contaminated area and it rearing by water-cleaned mulberry leaves can get noticable results in inevitable case on selection of parents silkworm rearingzone.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.66-71
• /
• 2005

Soil loss into stream and river by runoff shall be considered for non-point source pollution management as national land conservation. The purpose of this study was to develop the mathematical equation to predict soil loss from inclined uplands of maize cultivation due to the runoff by rainfall which mainly converges on July and August. Soil loss was concentrated on May because of low canopy over an entire field in 2002 and on June and July because of heavy rainfall in 2003. By regression analysis the relation between runoff and soil loss can be represented by a linear equation of y =1.5291x - 3.4933, where y is runoff ($Mg\;ha^{-1}$) and x is soil loss ($kg\;ha^{-1}$). The determination coefficient of this equation was 0.839 (P<0.001). Therefore, the mathematical equation derived from the practical experiment at the inclined upland can be applicable to predict soil loss accompanied by runoff due to periodic rainfall converging on short periods within a couple of months.

• Explosives and Blasting
• /
• v.39 no.3
• /
• pp.15-23
• /
• 2021

Ventilation shafts are pathways in mines and tunnels for the removal of dust or smoke during underground space construction and operation. In mines, blasting with long blast holes is preferred for the excavation of a ventilation shaft in the 10~20m long crown pillar section. In this case, the bottom part of the blast hole is completely drilled in order to determine the drilling error, and this causes a problem of lowering the explosive charge and blasting efficiency. It is possible to solve the problem of explosive loading and to increase the blast efficiency by covering the curb of the blasthole by using stemming material. In this study, simulations for the blasting of a ventilation shaft were performed with various stemming lengths and the blasthole diameters(45, 76mm) using AUTODYN 2D SPH(Smooth particle hydrodynamics) analysis technique. Also the optimal bottom stemming column was derived by checking the size of the boulder and burden line according to blasting. Analysis result, blasting efficiency is lessened in case of stemming length less than 30cm and the optimal length of the stemming material should be 30cm or higher to achieve high efficiency of blasting.

• Journal of vocational education research
• /
• v.30 no.4
• /
• pp.1-22
• /
• 2011

Paradoxically, leadership has not only positive effects but also negative effects. The purpose of this study is to examine supervisors' dysfunctional leadership behaviors, antecedents and results in order to draw HRD implications for protecting organizations and employees from dysfunctional leaders and provide implications for leadership development. A qualitative research method based on semi-organized interviews with 28 employees from S-group was used. The results of this study show that the dysfunctional leadership behaviors were associated with ten behavioral categories: belittling and insulting the subordinates, authoritative and arbitrary behaviors, self-aggrandizement, biased preference for certain personnel, arrogance, micro-managing, inability to change and adapt, discordance between words and actions, over-dependance on supervisor, lack of ethics and values. Dysfunctional leadership behaviors were casually attributed to 'personal traits & experience', 'task characteristics', and 'internal & external environments of the organization'. Finally, the results of supervisor's dysfunctional leadership behaviors on employees and the organizational effects were 'increased turnover rate', 'declining work efficiency', 'collapsing morale', 'retraining innovative thinking', 'passive working culture', 'discouraging organizational vitality', 'discouraging organizational synergy', 'losing loyalty' and 'declining trust on supervisor'.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.5
• /
• pp.31-38
• /
• 2019

Recently, there has been an increasing number of ground subsidence (sink-hole) in the downtown areas, and in such a case, it is important to minimize accidents and passages through prompt recovery. With respect to the present recovery method for ground subsidence, the methods of applying the back filling after excavating the ground subsidence or using the grouting injected materials to restore the ground are mostly used, but there has been few studies on materials used for recovering the ground subsidence. Therefore, in order to clarify the characteristics of back filling materials used in the ground subsidence, this study uses the environment-friendly hardening agent to improve the dredged clay, and then, the mixture ratio of hardening agent and mixture ratio of decomposed granite soil is changed to cure for 3, 7, 14 and 28 days to analyze the intensity characteristics of the unconfined compression, and it was compared with the unconfined compression intensity for the previously used cement, a hardening agent. In order to evaluate the characteristics of intensity on the back filling materials, the C.B.R test was carried out, and for the review on whether the back filling materials influence on corrosion of water and sewer pipes and others, the soil non-resistance test was carried out. As a result of the test, for the case of the recovery work of the ground subsidence that requires urgency, it is considered as prudent if the hardening agents of 12% are integrated to cure for 3 days or longer, and for not having the influence on the corrosion of the gas tube or water pipes, it is proposed to mix for 30% or more of the decomposed granite soil. Door model test were conducted To confirm the bearing capacity characteristics of the solidified layer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.529-535
• /
• 2018

The range extender vehicle runs on a mechanism that allows the small power generation engine to start in the most efficient specific operating range to charge the battery and extend the mileage. In this study, we developed a step motor type intake air supply system that replaces existing throttle body system to develop a simple low cost control logic system. The system was applied to the existing base engine, and in order to improve the performance by increasing the amount of intake air, the effect of changing the length of the intake and exhaust manifold was experimentally examined. As a result, the Type B intake air control actuator operated by one step motor showed higher performance than the Type A in all the operation region, but the performance was lower than that of the base engine due to the increase of flow resistance. To improve this, it was confirmed that the engine performance was improved at both speeds of 2200rpm and 4300rpm when the 140mm adapter was installed in the intake manifold and when the newly designed 70mm exhaust manifold was applied. Through this process, high - precision operation control was realized by connecting the generator load to the optimized engine for the range extender electric vehicle. Experimental results showed that the speed change rate was within ${\pm}2.5%$ at 2200rpm in 1st stage and 4300rpm in 2nd stage and the speed follow-up result of 610 rpm/s was obtained when the speed was increased from 2200rpm to 4300rpm.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.525-530
• /
• 2019

The performance and stability of solid oxide fuel cells (SOFCs) depend on the microstructure of the electrode and electrolyte. In anode, porosity and pore distribution affect the active site and fuel gas transfer. In an electrolyte, density and thickness determine the ohmic resistance. To optimizing these conditions, using costly method cannot be a suitable research plan for aiming at commercialization. To solve these drawbacks, we made high performance unit cells with low cost and highly efficient ceramic processes. We selected the NiO-YSZ cermet that is a commercial anode material and used facile methods like die pressing and dip coating process. The porosity of anode was controlled by the amount of carbon black (CB) pore former from 10 wt% to 20 wt% and final sintering temperature from $1350^{\circ}C$ to $1450^{\circ}C$. To achieve a dense thin film electrolyte, the thickness and microstructure of electrolyte were controlled by changing the YSZ loading (vol%) of the slurry from 1 vol% to 5 vol. From results, we achieved the 40% porosity that is well known as an optimum value in Ni-YSZ anode, by adding 15wt% of CB and sintering at $1350^{\circ}C$. YSZ electrolyte thickness was controllable from $2{\mu}m$ to $28{\mu}m$ and dense microstructure is formed at 3vol% of YSZ loading via dip coating process. Finally, a unit cell composed of Ni-YSZ anode with 40% porosity, YSZ electrolyte with a $22{\mu}m$ thickness and LSM-YSZ cathode had a maximum power density of $1.426Wcm^{-2}$ at $800^{\circ}C$.

• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.157-196
• /
• 2018

This study analyzes non-standard workers' attitudes and behaviors towards standard workers' strikes using the case of a joint strike held by journalists at KBS and MBC in 2012. Tracing the process since 2008 by which a conservative government has tried to control the press and regular journalists have collectively resisted against it, we put our analytical focus on two major groups of freelance broadcast professionals: independent producers and writers in current affairs. Specifically, we examine 1) how they perceived and responded to a series of regular journalists' struggle to protect journalistic value, 2) how such perception of and response to regular journalists could be developed, and 3) how (de)solidarity could form and then deepened between freelance and regular journalists in the 2012 Media Strike. Our findings show that the ways in which regular journalists had controlled freelance journalists at work affected the relationship between class-based and occupation-based rationality freelance journalists held in their minds. Independent producers, who had developed a strong class-based rationality in response to the coercive input-output control, showed cynicism about regular journalists' strike pointing out their hypocrisy and contradiction. In contrast, freelance writers accommodated and joined the strike by regular workers in the spirit of solidarity based on occupational rationality which had developed from normative, process control. Our paper ends with theoretical and practical implications.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.4
• /
• pp.477-483
• /
• 2018

Transcranial doppler is a non-invasive method that measures the blood flow velocity and the direction of cerebral blood vessels through the doppler principle. The pulsatility index is an index for measuring the transcranial doppler that reflects the distal vascular resistance and is used as an index for the presence and diffusion of cerebral small vessel diseases. The purpose of this study was to evaluate the risk factors affecting the basilar artery pulsatility index in ischemic stroke patients. From January 2014 to May 2015, 422 patients were selected by measuring the transcranial doppler pulsatility index, considering their basilar artery pulsatility index. Univariate analysis was performed using the basilar artery pulsatility index as a dependent variable. Multiple regression analysis was performed considering the factors affecting the pulsatility index as variables. Univariate analysis revealed age, presence of hypertension, presence of diabetes mellitus, presence of hyperlipidemia, and hematocrit (P<0.1) as factors. Multiple regression analysis showed statistically significant results with age (P<0.001), presence of diabetes (P=0.004), and presence of hyperlipidemia (P=0.041). The risk factors affecting the basilar artery pulsatility index of transcranial doppler were age, diabetes, and hyperlipidemia. Further research will be needed to increase the cerebral pulsatility index as a surrogate marker of the elderly, diabetes, and hyperlipidemia.