• Journal of Plant Biotechnology
• /
• v.42 no.4
• /
• pp.290-297
• /
• 2015

Based on the place of its origin, pear tree (Pyrus spp.) is largely divided into European pears (P. communis, cultivated mainly in Europe and the U.S.) and Asian pears (P. pyrifolia, P. bretschneideri, and P. ussuriensis, distributed and grown in East Asian countries including China, Japan, and Korea). Most pear trees have 17 chromosomes (diploidy, 2n=2x=34). Their genetic studies and precise cultivar breeding are highly restricted by conditions such as self-incompatibility controlled by S-locus and juvenility as one major character of fruit crops. Genetic studies on Pyrus have been promoted by the development of various molecular markers. These markers are being utilized actively in various genetic studies, including genetic relationship analysis, genetic mapping, and QTL analysis. In addition, research on pear genetic linkage maps has been extended to studies for the identification of QTL for target traits such as disease resistance and genetic loci of useful traits. NGS technology has radically reduced sequencing expenses based on massive parallel reactions to enable high-capacity and high-efficiency. NGS based genome analyses have been completed for Chinese pear 'Danshansuli' and European pear 'Bartlett'. In Korea, GWAS for agricultural valuable traits such as floral structure, ripening, and total soluble contents have been conducted through resequencing. GBS has been performed for 'Whangkeumbae', 'Cheongsilri', and 'Minibae'.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31
• /
• pp.36-44
• /
• 1998

우리 나라에서 토양의 점토광물에 관한 최초의 연구는 1958년 김제지방의 답 토양에 관한 연구로 (Dewan, 1958)시작되었다. 1960년대 시작하여 1970년대 까지는 주로 토양점토광물의 동정이 이루어 졌다. 점토광물의 동정(同定)에 사용된 잔적토(殘積土)(Residual Soil)로는 화강암(花崗岩), 화강편마암(花崗片麻岩), 현무암(玄武岩), 석회암(石灰岩), 혈암(頁岩), 제(第)3기층(紀層), 홍적층(洪積層) 유래 토양과 토양종류별(土壤種類別)로는 과부식회색토(寡腐植灰色土), 염류토(鹽類土), 충적토(沖積土), 적황색토(赤黃色土), 화산회토(火山灰土), 퇴적토(堆積土), 갈색토(褐色土), 암쇄토(岩碎土), 저위생산답(低位生産畓)이였으며, 토양점토광물(土壤粘土鑛物)과 작물수량성(作物收量性) 관계에 관한 연구가 실시되었다. 1980년대에 들어와서는 토양중의 1차광물과 점토광물의 풍화에 대한 안정도와 1차광물의 동정이 행해졌으며, 이밖에 Kaolinite 입자의 전하에 관한 연구등 점토광물의 흡착과 활성 연구, 점토광물의 토양개량재로서의 흡착과 화학적 특성 변화 연구와 점토광물의 토양개량 시용효과에 관한 연구가 행해졌다. 1990년대에 들어와서는 토양 중의 1차광물과 점토광물의 정량에 대한 자료가 축척되었고, 토양의 풍화에 대한 안정성과 생성기작, Zeolite와 새로운 광물이 합성되었다. 또한 합성광물을 이용한 농업과 산업광물로의 응용성 환경 산업에서의 적용가능성에 대한 평가가 시도되었다. 토양의 점토광물의 조성에 관한 연구는 토양 모재를 중심으로 이루어졌는데, 화강암(花崗岩)에서는 Halloysite, 화강편마암(花崗片麻岩)에서는 Kaolinite, Metahalloysite, Illite, 산성암(酸性岩)에서는 Kaolinite, Venrmiculite와 Chlorite의 중간광물, 현무암(玄武岩)에서는 Illite, Kaolinite, Vermiculite, 석회암(石灰岩)에서는 Vermiculite-Chlorite 중간광물, Kaolinite와 Illite, 혈암(頁岩)에서는 Kaolinite, Halloysite, Illite 외 Vermiculite-Chlorite, 화산회토(火山灰土)에서는 Allophane이 주광물이었다. Soil Taxonomy와 토양광물과의 관계에서, 답 토양에서는 Entisols의 주점토광물은 2:1형과 1:1형 광물이지만 Inceptisols와 Alfisols에서는 Halloysite가 대부분이다. 밭 토양의 경우는 Alfisols의 주점토광물은 Vermiculite, Illite, Kaolinite이었고, Ultisols에서는 Vermiculite-Chlorite 중간광물이었다. 산림토양에서는 Inceptisols중에서 Andept는 Allophane, Alfisols에서는 2:1 광물이지만, Ultisols에서는 Halloysite이다. 모재별 조암 광물의 풍화와 점토광물의 생성과정에서 화강암(花崗岩)과 화강편마암(花崗片麻岩)의 장석류(長石類)는 kaoline광물로, 이 밖의 운모광물(雲母鑛物), 녹니석(綠泥石), 각섬석(角閃石), 휘석(輝石)으로부터 생성된 illite, chlorite, vermiculite는 풍화중간에 혼층단계(混層段階)를 거쳐서 kaoline 광물로 풍화된다. 석회암(石灰岩) 토양의 smectite가 Mg농도가 높은 토양용액으로부터 침전되어 생성되었거나 운모 또는 chlorite에서 유래된 vermiculite의 변성작용에 의해 생성되고, 혈암(頁岩)토양의 점토에 illite가 주로 풍화에 저항성이 큰 미립자의 함수백운모(含水白雲母)로부터 유래되며, 현무암(玄武岩) 중의 장석류(長石類)는 kaoline광물로, 휘석(輝石)은 chlorite${\rightarrow}$illite의 풍화과정을 거친다. Zeolite, 함불석 Bentonite, Bentonite 등 우량점토 광물이 분포과 광물조성, 이화학적 특성이 조사되었고, 토양의 물리적, 화학적 성질의 개선을 필요로 하는 토양의 개량을 위해서 Bentonite, Zeolite, Vermiculite 등의 토양 개량재(改良材)로서의 기초연구와 이들 개량재 시용효과에 관한 연구 등이 주로 논토양에서 수행되었다. 점토광물과 수량관계를 보면 Montmorillonite를 주점토광물로 함유된 답 토양의 수도수량이 1:1 광물을 주점토광물로 함유하고 있는 토양에서의 수도수량 보다 높았다. 토양광물에 관한 기초연구(基礎硏究)로서 양이온교환능과 포화이온의 영향, 입자의 전기화학적 성질, 흡탈착 성질, 표면적과 등전점, 해성점토에 대한 압밀점토(壓密粘土)의 변형율(變形率)의 추정 등이 주로 연구되었다. 부가가치가 낮거나 폐기되는 광물을 이용하여 토양개량재 혹은 흡착제를 형성하는 연구가 알카리 처리에 의한 Zeolite 합성에 집중되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1011-1015
• /
• 2005

본 실험에서는 부력 조건이 달라질 때 단공방류구에서 정체수역으로 수평방류되는 부력제트의 거동을 규명하였다. LIF (Laser Induced Fluorescence) 시스템을 이용하여 수행하였는데, LIF 시스템은 고해상도의 이미지를 취득할 수 있어 데이터의 정확도가 높으며, 동시에 한 평면상의 농도장을 일시에 측정할 수 있는 장점이 있는 기술이다. LIF 시스템은 크게 세부분으로 구성되어 있는데 방출시스템, 포착시스템, 처리시스템이 그것이다. 실험 조건을 고려해서 온수를 이용하여 주변수와의 밀도차를 재현하였으며, LIF 시스템의 추적입자로 형광염료 Rhodamine B를 사용하였다. 또한, 실험 데이터 취득과정에서 필요한 검정과정을 수행하였는데, LIF 시스템에서 검정과정은 레이저 입사광의 강도가 불균등한 분포를 가지는 점과 주변수의 매질에 의한 근의 감쇠가 발생하는 문제를 해결하기 위한 것이다. LIF 시스템은 부력제트의 농도장을 매우 정밀하게 측정할 수 있는데, 방류밀도 Froude 수가 변함에 따라 측정된 순간이미지를 통해 제트의 진화과정을 상세하고 가시적으로 확인할 수 있었다. 검정과정을 거친 농도 종단면에서 중심선의 연장선이 LIF 시스템에 의해 측정된 순간이미지의 중심선 궤적과 거의 일치하는 것도 알 수 있었다. 또한 LIF 시스템을 통해서 취득된 단일수평부력제트의 궤적과 중심선 희석률을 기존의 상용모형인 VISJET과 CORMIX1에 의해 예측된 결과와 비교$\cdot$분석한 결과, 제트 중심선 궤적의 경우, LIF 시스템을 이용한 측정값은 대체로 VISJET 모형의 결과와 일치하는 것으로 밝혀졌다. 중심선 희석률의 경우, LIF 측정값은 대체로 CORMIX1 모형, Cederwall(1968)의 경험식과 일치하는 경향을 보였다.0\%$일 때가 밸브를 $60\%$와 $80\%$ 개폐시켰을 때보다 $0.3kg/cm^2,\;0.29kg/cm^2$ 낮게 나타나 밸브를 전체 개방 했을 때 관로내의 수압이 상수설계기준에 적합한 수압을 유지함을 알 수 있다. 상수관로 설계 기준에서는 관로내 수압을 $1.5\~4.0kg/cm^2$으로 나타내고 있는데 $6kg/cm^2$보다 과수압을 나타내는 경우가 $100\%$로 밸브를 개방하였을 때보다 $60\%,\;80\%$ 개방하였을 때가 더 빈번히 발생하고 있으므로 대상지역의 밸브 개폐는 $100\%$ 개방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.601-606
• /
• 2000

Nickel mono-silicide(NiSi) shows no increase of resistivity as the line width decreases below 0.15$\mu\textrm{m}$. Furthermore, thin silicide can be made easily and restrain the redistribution of dopants, because NiSi in created through the reaction of one nickel atom and one silicon atom. Therefore, we investigated the deposition condition of Ni films, heat treatment condition and basic properties of NiSi films which are expected to be employed for sub-0.15$\mu\textrm{m}$ class devices. The nickel silicide film was deposited on the Si wafer by using a dc-magnetron sputter, then annealed at the temperature range of $150~1000^{\circ}C$. Surface roughness of each specimen was measured by using a SPM (scanning probe microscope). Microstructure and qualitative composition analysis were executed by a TEM-EDS(transmission electron microscope-energy dispersive x-ray spectroscope). Electrical properties of the materials at each annealing temperature were measured by a four-point probe. As the results of our study, we may conclude that; 1. SPM can be employed as a non-destructive process to monitor NiSi/NiSi$_2$ transformation. 2. For annealing temperature over $800^{\circ}C$, oxygen pressure $Po_2$ should be kept below $1.5{\times}10^{-11}torr$ to avoid oxidation of residual Ni. 3. NiSi to $NiSi_2$ transformation temperature in our study was $700^{\circ}C$ from the four-point probe measurement.

• Current Research on Agriculture and Life Sciences
• /
• v.10
• /
• pp.41-47
• /
• 1992

In general, the behavior of moisture transmission is estimated by vapor permeability or vapor transmission resistance, but its values obtained by experiments do not have great adaptability for practical situations because of changes in the experimental conditions. This fact is why only theoretical discussions have advanced. Thus, the fundamental study of the moisture transmission phenomenon has been treated lightly. Here, as the first step toward the basic research of moisture transmission, the amount of moisture transmission and the moisture distribution in specimens were investigated. The experiment was conducted in a steady state, and the moisture distribution was measured by slicing and weighing the specimens. From the examination of the vapor transmission resistance, the phenomenon of moisture transmission was dealt with devide the moisture transfer on the wood surface and moisture diffusion in wood. The following results were obtained. 1) The phenomenon of moisture transmission should be approached by its division into moisture transfer on the wood surface and moisture diffusion in the wood because the positive values of vapor transmission resistance exist in the extrapolation of thickness 0mm. 2) The distribution of moisture in wood can be illustrated by two straight lines intersecting at the point of nine percent moisture content : namely, diffusion coefficients have two constant values at moisture contents below and above nine percent. The shape of the distribution curve of moisture content is similar irrespective of the wood thickness. On the other hand, when the moisture contents on both sides was more than nine percent, the distribution of the moisture content could be illustrated by one straight lines. 3) The amount of moisture movement is determined by the moisture gradient in wood. 4) Coefficients of the moisture transfer depend on the thickness of the specimens.

• Tunnel and Underground Space
• /
• v.21 no.4
• /
• pp.320-327
• /
• 2011

In this study, for stemming effect in blast of the mortar block body, the crushed granite sand as fine aggregate, which is waste rock obtained at the ○○ limestone mine, was investigated to compare with stemming materials such as sea sand, river sand, clayed soil and water can be acquired easily at the field. The mortar block body was manufactured with the dimensions of 50 cm width, 50 cm length and 70 cm height. The direct shear and sieve separator test were performed, and the properties of friction resistance were analyzed by the extrusion test for five stemming materials. Axial strain of steel bar and ejection velocity of stemming materials due to the explosive shock pressure in blasthole with the stemming length of 10 cm and 20 cm in the mortar blast test were measured by the dynamic data acquisition system. Among stemming materials, axial strain showed the largest value at the crushed granite sand as fine aggregate, and the ejection velocity was the smallest value at the stemming of water. The results has shown correlate with harden unit weight in blasthole, particle size distribution, shear resistance, and extrusion strength of stemming materials. The ejection velocity of stemming material at the mouth of blasthole and the axial strain of steel bar in the inside of blasthole tend to be inversely proportional to each other, represent exponentially.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.419-426
• /
• 2012

A transient, three-dimensional, two-phase flow analysis code, CUPID, has been developed in KAERI. In this work, we performed a preliminary analysis using the CUPID code to investigate the thermal-hydraulic behavior of the moderator in the Calandria vessel of a CANDU reactor. At first, we validated the CUPID code using the three experiments that were performed at Stern Laboratories Inc. To avoid the complexity to generate computational mesh around the Calandria tube bundles, a porous media approach was applied for the region. The pressure drop in the porous media zone was modeled by an empirical correlation. The results of the calculations showed that the CUPID code can predict the mixed flow pattern of forced and natural convection inside the Calandria vessel very well. Thereafter, the analysis was extended to a two-phase flow condition. Also, the local maximum temperature in the Calandria vessel was plotted as a function of the injection flow rate, which may be utilized to predict the local subcooling margin.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.7
• /
• pp.391-402
• /
• 2017

Particulate matter becomes an important issue in the environmental society recently so that it is necessary to evaluate that the commercial application of baghouse systems for effective control of fine particulates is viable. A laboratory-scale baghouse experimental apparatus with filter bags made of PTFE felt or PTFE felt coated with PTFE membrane is used to investigate the filtration performances of fine particulates. Experiments by changing filtration velocity, inlet dust concentration, and average dust particle size show that the dust collection efficiency becomes higher at lower filtration velocity, higher inlet dust concentration and larger average dust particle size. The total pressure drop through the filter media and dust layer becomes higher at higher filtration velocity and higher inlet dust concentration. The dust collection efficiency is higher and the pressure drop is lower at a baghouse with filter bags coated with PTFE membrane than that without membrane coating. From the result that the dust collection efficiency of $PM_{2.5}$ in a reasonable filtration velocity range during off-line pulsing at a baghouse with PTFE felt bag filters coated with PTFE membrane is as high as 99.99%, it is confirmed that the use of baghouse is an effective measure to control the fine particulates.

• Asian Journal of Turfgrass Science
• /
• v.26 no.2
• /
• pp.89-95
• /
• 2012

Korean lawn grass, which belongs to Zoysia genus in Gramineae family, is one of the major turfgrass which is widely adapted to its native niches in the temperate region of the north east Asia through tropical regions including Philippine, Thailand and Australia. The Turfgrass Information Center' database provides 5,340 descriptive records including 638 referred papers and 1,370 technical reports concerning 'Zoysia'. The database focused on researches on golf courses and lawn care industries. The researches provide informations on seed technology and use of plant protectant for pest management in turf management industries. The purpose of this study is to analyze and classify the research contents of zoysiagrasses which have been published in Korean journals. The total number of research papers published in Korean journals were 274 including 102, 38, and 134 in the 'Botanical', 'Environmental' and 'Cultural' researches, respectively. Publication in foreign journals by Korean investigators were not counted in this research. Research fields concerning golf course maintenance and plant protectant are believed to be necessary when compared to international trends. Moreover, advanced research efforts for the development of new cultivars with various environmental and disease resistance should be accomplished.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4033-4038
• /
• 2013

Sedimentary rocks from construction waste are discarded through open storage and landfilling, which causes an increase in construction cost and inefficient of execution of works. Some sandstone are selected and utilized as aggregates, but shale is buried as industrial waste. Therefore, in this research, we evaluated weathering properties of shale aggregate that is widely distributed throughout Daegu-Kyeongbuk region and freeze-thaw characteristics of concrete according to the replacement ratio of shale aggregate, in an effort to stabilize aggregate supply-demand in Daegu-Kyeongbuk region and develop alternative aggregates. We used red shale and black shale in the experiment, which were exported from a construction site in Deagu. We verified the usage of shale as a concrete aggregate by comparing andesite, which is broadly used as a thick aggregate for concrete, to hornfels, which is a metamorphic sedimentary rock. As a result of the experiment, we observed no degradation phenomenon for andesite and hornfels. However, a part of country rock containing black shale was found to be exfoliated. Red shale started having cracks in the direction of stratification after 1.5 months of direct exposure, and it broke into smaller pieces after approximately 4 months. After 300 cycles of freeze-thaw process on the concrete manufactured according to the replacement ratio of shale aggregate, the modulus of elasticity was 97% for plain and 95% for hornfels. In the case of RS_100, it was 57% after 210 cycles, and for BS_100, it was 54% after 240 cycles. Therefore, we established that, as the number of repetition increases, the freeze-thaw resistance decreases dramatically.