• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.982-988
• /
• 2002

Current design equations for shear strength of reinforced concrete columns generally overestimate the shear strength contribution by the circular transverse reinforcement. This is due to the simplification of the discrete distribution of the reinforcement to the continuous one and the imprudent application of the classical truss model to the circular section, which is different in shear-resisting mechanism from the rectangular section. This study presents a rational model for the prediction of shear strength contribution by the circular transverse reinforcement considering the starting location of a diagonal crack, the number of transverse reinforcing bars crossing the main crack and the geometrical strength component of the transverse resistance. It was found that, for lower amount transverse reinforcement, the crack starting point and the number of crack crossing bars greatly influence the shear-resisting capacity. Proposed model leads to a reliable design equation which is derived using a linear regression method and is in good agreement with the lower bound of exact strength curve.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.517-523
• /
• 2007

Geophysical surveys(seismic refraction, electrical resistivity, and ground penetrating radar) were performed to delineate the weathering zone associated with vadose water in Chojeong area and investigate the fault related fracture zones. On the basis of seismic velocity structures, weathering layer for the southwestern part is interpreted to be deeper than for the northeastern part. The depth to bedrock(i.e., thickness of weathered zone) from seismic refraction data attempted to be correlated with drill-core data and groundwater level. As for the investigation of geological discontinuities such as fault related fracture zone, seismic refraction, electrical resistivity, and ground penetrating data are compositely employed in terms of velocity and resistivity structures for mapping of surface boundary of the discontinuities up to shallow depth. Surface boundaries of fracture zone are well indicated in seismic velocity and electrical resistivity structures. Accurate estimation of weathered zone and fracture zone can be successfully available for mapping of attitude of vadose water layer.

• Economic and Environmental Geology
• /
• v.35 no.2
• /
• pp.155-162
• /
• 2002

There are many typical epithermal deposits scattering in the Taran of central Kalimantan. Indonesia. To get the shallow geological information, we carried out the geophysical exploration: spontaneous potential survey, in-suite magnetic susceptibility measurement and relistivity survey method in this area for a few weeks from September 30th to October 27th in 1997. SP survey (Fluke 27 multimeter)/magnetic susceptibility (EK -7 meter) measurement was carried out with a 250m$\times$10m lattice net in N45$^{\circ}$W direction. The dipole-dipole array resistivity survey was conducted with an electrode spacing of ${\alpha}$=30 m and electrode separation index n=7 at the line 5. The result shows that was the gold bearing quartz vein area can be divided into two type lone: low sulfidation type and high sulfidation type zone. The low resistivity value in the survey line 5 indicated a fracture Bone associated with the high sulfidation zone.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.3
• /
• pp.255-266
• /
• 2010

In high-rise buildings, an outrigger system is frequently used as a resisting system for lateral loads. Since the outriggers tie exterior columns and an interior core, exterior columns can participate in the lateral load resisting system and the structural resistance capacity can be increased. However, the outriggers contribute for controlling gravity loads as well as lateral loads. The flows of gravity loads can be changed by the members of outriggers, for the purposes of transferring loads to mega-columns, distributing gravity loads equally among vertical members of columns, walls, or piles, minimizing differential settlements in a foundation system, and so on. In this study, by computational structural analyses of high-rise buildings over 100 floors, the effects of outriggers on controlling gravity loads are analyzed. Analyses for 3-dimensional models with or without outrigger members are performed, and then the gravity load distributions in columns and piles and foundation settlements are analyzed. Also, the effects of outriggers on gravity load controls during construction stages as well as after construction are included.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.262-271
• /
• 2002

This study presents a practical procedure for the Bayesian inversion of geophysical data. We have applied geostatistical techniques for the acquisition of prior model information, then the Markov Chain Monte Carlo (MCMC) method was adopted to infer the characteristics of the marginal distributions of model parameters. For the Bayesian inversion of dipole-dipole array resistivity data, we have used the indicator kriging and simulation techniques to generate cumulative density functions from Schlumberger array resistivity data and well logging data, and obtained prior information by cokriging and simulations from covariogram models. The indicator approach makes it possible to incorporate non-parametric information into the probabilistic density function. We have also adopted the MCMC approach, based on Gibbs sampling, to examine the characteristics of a posteriori probability density function and the marginal distribution of each parameter.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.442-448
• /
• 2021

Flow field is an important parameter for polymer electrolyte membrane fuel cell (PEMFC) performance to have an effect on the reactant supply, heat and water diffusion, and contact resistance. In this study, PEMFC performance was investigated using Cu foam flow field at the cathode of 25 cm² unit cell. Polarization curve and electrochemical impedance spectroscopy were performed at different pressure and relative humidity conditions. The Cu foam showed lower cell performance than that of serpentine type due to its high ohmic resistance, but lower activation and concentration loss due to the even reactant distribution of porous structure. Cu foam has the advantage of effective water transport because of its hydrophobicity. However, it showed low membrane hydration at low humidity condition. The metal foam flow field could improve fuel cell performance with a uniform pressure distribution and effective water management, so future research on the properties of metal foam should be conducted to reduce electrical resistance of bipolar plate.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.3
• /
• pp.5-17
• /
• 2021

This study aims to investigate the causes and countermeasures for the occurrence of tension cracks in the slope of the rock mass of heavy equipment for road construction. Electric resistivity survey was performed to investigate the expandable tensile crack range. As a result of examining the distribution of soft zones in the rock mass, a low specific resistance zone was found at the bottom of the access road where tensile cracks occurred. It was confirmed that a low resistivity zone was distributed near the top of the excavation slope. Therefore, reinforcements was performed by determining the location of the possible tensile crack as the top of the excavation slope. Two rows of reinforced piles and anchors were proposed as a reinforcement method, and the slope stability analysis showed that the allowable safety factor was satisfied after reinforcements.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.509-513
• /
• 2004

현장 균열망의 연결성 및 이에 따른 수리지질학적 특성을 규명하기 위하여, 기존의 통상적인 조사 기법을 한 지역에 집적하여 그 결과에 대한 통합해석을 수행하였다. 본 연구에 적용된 조사 방법은 양수시험, 물리검층, 다중심도 수리화학 분석, 전기비저항 토모그래피, 시추 코어 검층 등의 기련 특성 조사와, 추적자 시험, 다중 심도 수직 유향유속 시험 등 구간별 특성 조사 등이다. 이러한 조사 결과 본 조사 지역 내 균열의 전반적인 분포 특성을 확인할 수 있었으며, 각 균열의 수리적 특성에 대한 기본적 특성을 확인할 수 있었다. 특히 추적자 시험과 유향유속 시험 결과를 통해 각 관정간의 균열을 통한 연결성에 대한 중요한 정보를 도출할 수 있었다. 이러한 성과는 추후 percolation, connectivity 등 모델 개념의 현장화를 위한 연구의 선행 연구로서 그 의미를 자리매김 할 수 있을 것이다.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.171-172
• /
• 2008

원적외선 세라믹 건조기를 개발하기 위하여 탄화규소가 주원료로한 세라믹 발열판을 제작하여 건조기 내부에 설치하여 실험하였다. 발열판 장착위치에 따른 실험결과 위치는 큰 변수가 되지 않았고, 기존 5[kW]용량의 씨즈 히터를 2[kW]의 세라믹 발열판으로 대체하면서 에너지절약형 원적피선 세라믹 건조기를 제작할 수 있었다. 또한 발열판 자제 온도 분포를 측정한 결과 시간이 흐름에 따라 온도 분포는 약진의 차이가 있기는 하지만 대체적으로 근일한 분포를 나타내었다. 사용에 따른 경년변화를 측정하기 위해 90시간 동안 부하를 걸어 실험하였지만 발열판 자체의 저항이나 소비 전력의 변화는 나타나지 않았다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.347-355
• /
• 2015

최근 활발한 하천개발을 통하여 하안에는 많은 식생도입이 주류를 이루고 있다. 통상 하안에 자생하고 있는 조밀한 식생은 수리학적 저항이 증가되고 통수능이 감소되어 수위상승을 초래한다. 본 논문에서는 수리 해석 모형을 활용하여 중소규모 3개소의 하천을 대상으로 자연 상태와 조밀한 식생 분포에 해당하는 11가지 조도계수 모델조건을 적용하여 수리특성 변화를 분석하였다. 각 하천별 전 구간에서 식생에 의하여 하천정비계획에서 분석된 수위보다 1.2~2.7m가 상승하는 것으로 분석되었다. 각 하천별로 계획된 여유고 0.6~1.2m를 감안하면 계획홍수 이상의 강우가 발생될 경우 적절한 대책수립이 필요한 것으로 분석되었다. 분석 결과에 의하면, 하천변 식생이 활착되면 하천의 규모, 하상경사에 관계없이 수리학적 흐름 특성은 매우 민감하게 변화되는 것을 알 수 있었다.