• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.42-51
• /
• 1998

안전한고 쾌적한 보행환경을 조성하여 보행 교통을 활성화시킨다면, 자동차의 사용이 줄게 되고 자동차의 유해한 배출가스로 인한 공기 오염 및 소음 등을 낮출 수 있을 뿐만 아니라 도심부의 미관 증대, 역사적 구역의 보존, 물리적인 도시 이미지 향상 등의 효과로 도심기능의 활성화에 기여할 수 있을 것이다. 이와 같은 보행통행의 중요성을 인식하여 안전하고 효율성 있는 보행동선을 조성할 필요가 있다. 그러나 상당수의 종합병원과 같은 공공성을 띤 건물들은 대부분의 보행자가 보행동선을 이용하여 건물에 접근하는데도 불구하고 차량을 중심으로 동선이 운영되고 있는 실정이다. 차량위주의 동선 체계는 보행 통행자로 하여금 차량통행으로의 전환을 유도할 가능성이 있어 이에 대한 대책이 필요하다. 본 연구는 분석대상으로 차량과 보행자에게 동등하게 접근의 용이성을 제공해야 하는 광주시의 4대 종합병원을 대상으로 보행자 집단에게 가해지는 저항이 구체적으로 얼마나 심각하며, 그 원인은 어떠한 물리적 조건에 의하여 발생하는지 알아 보았다. 보행저항을 파악하기 위한 지표로는 차량과 보행자의 충돌점의 수, 최단거리 선호도, 보행로 미확보율 등을 설정하여 분석하였다. 이러한 분석의 결과 나타난 문제점들을 해결하기 위한 방안도 함께 모색하였다.

• Korean Journal Plant Pathology
• /
• v.1 no.2
• /
• pp.136-140
• /
• 1985

The studies were conducted to test for combining ability and to evaluate resistance to maize dwarf mosaic virus (MDMV) by diallel crosses of corn inbreds. For the genetic analysis of the resistance, a diallel set of crosses without reciprocals was made using the eight corn inbreds which had different degrees of resistance to MDMV. Twenty eight $F_1$ hybrids showed different symtom severity. the highest value is 3.63 and the lowest value is 1.87 in disease ratings (1-4). General combining ability (GCA) for resistance to MDMV was highly significant, but specific combining ability (SCA) was not significant. Two inbreds, A632 and KS15 showed negative GCA effects, indicating that these parents were good general combiners and that resistance to MDMV increased in hybrid combinations. Hyrid A632 x KS5, showed the highest negative SCA effect and several combinations showed negative SCA effects. The analysis of parent-offspring covariance (Wr) and array variance (Vr), suggest that there may be many dominant genes in the resistant inbreds and many recessive genes in the susceptible inbreds.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.520-524
• /
• 2009

A newly developed rice variety "Pungmi 1" is a japonica rice(Oryza sativa L.) with high grain quality and multi-resistant to diseases. It was developed by the rice breeding team of Yeongnam Agricultural Research Institute (YARI), RDA. in 2004. This variety derived from a cross between "YR13616Acp 1", having short culm and multi-resistance to biotic stresses and "Milyang 122" with good grain quality. It has short stature of 73cm in culm length and mid-early flowering date of Aug. 13. This variety is moderately resistant to leaf blast showing durable resistance of lower 10% diseased leaf araea in sequential planting meothod. Milled rice kernel of "Pungmi 1" is translucent, clear in chalkness and good at eating quality in panel test. Milling recovery and head rice ratios were comparable to Milyang 122, while it has low protein content. The milled rice yield potential of "Pungmi 1" is about 5.59 MT/ha at ordinary fertilizer level of local adaptability test. This cultivar would be adaptable to Yeongnam inland plains and southern coastal areas of Yeongnam province at ordinary transplanting as well as after barly cultivation.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.2 s.39
• /
• pp.21-26
• /
• 2006

We developed a bonding at low temperature using fine pitch Sn and In bumps, and studied the reliability of the fine pitch In-Sn solder joints. The $30{\mu}m$ pitch Sn and In bumps were joined together at $120^{\circ}C$. A non conductive adhesive (NCA) was applied during solder joining. Thermal cycling test ($0^{\circ}C-100^{\circ}C$, 2 cycles/h) of up to 2000 cycles was carried out to evaluate the reliability of the solder joints. The bondability was evaluated by measuring the contact resistance (Rc) of the joints through the four point probe method. As the content of filler increased, the reliability improved in the solder joints during thermal cycling test because the contact resistance increased little. The filler redistributed the stress and strains from the thermal shock over the entire joint area.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.333-337
• /
• 2009

A new malting barley variety, "Daho", was developed from the cross between "Milyang85 and Suwon335" at the Department of Rice and Winter Cereal Crop (DRWCC) NICS, in 2007. An elite line, YMB2064-B-8-2-4-1-1, was selected in 2004 and designated as "Milyang134". It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2005 to 2007 and was released with the name of "Daho", having high yielding and BaYMV resistance. The average heading and maturing dates of "Daho" were April 19 and May 27, which were 2 days later and 1 day earlier than those of "Jinyang", leading variety, at the regional adaptation yield trials (RYT), respectively. "Daho" had longer culm length (84 cm), more spikes per $m^2$ (915) and higher 1,000 grain weight (39.2 g) than those of "Jinyang" in paddy field condition. "Daho" was showed resistance to BaYMV at the regions of Naju, Jinju, and Milyang but moderately resistance at Iksan. However, the response of "Daho" to other environmental stresses was similar to "Jinyang". The yields of "Daho" at upland and paddy fields were about 5.20 MT/ha, 4.81 MT/ha, respectively, which is about 38%, 25% higher than those of "Jinyang" in the regional adaptation yield trials (RYT), respectively. It has higher grain assortment, germination capacity, water sensitivity and Kolback index but lower malt extract, diastatic power and filtration speed than those of "Jinyang".

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.91-92
• /
• 2017

풍력 발전 시스템에서 정격 풍속 이상의 바람에 대응하기 위해서는 일반적으로 전기적 브레이크와 기계적 브레이크가 요구된다. 기계적 브레이크는 상대적으로 응답성이 느리며 그 시간 동안 발전기 rpm 증가에 따른 DC전압 상승에 대응하는 전기적 브레이크의 역할이 시스템 안정성에 있어 매우 중요한 요소이다. 전기적 브레이크 중에서도 소형풍력 발전시스템에서는 DB(Dynamic Brake)저항을 통해 부하를 걸어주는 방식이 주로 쓰인다. DB 저항 구동에 있어 히스테리시스 루프에 기반한 PWM제어가 일반적으로 통용되는 방식이다. 이러한 방식과 비교하여 제어 안정성, 전압 오버슈트 등의 면에서 우수한 DB저항 제어 방식을 제안하며 히스테리시스 방식과 과도상태 정상상태 특성 비교 및 성능 분석을 시뮬레이션 결과를 통해 제시한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.27-32
• /
• 2010

For the flip chip joints processed using Cu pillar bumps and Sn pads, thermal cycling and high temperature storage reliabilities were examined as a function of the Sn pad height. With increasing the height of the Sn pad, which composed of the flip chip joint, from 5 ${\mu}m$ to 30 ${\mu}m$, the contact resistance of the flip chip joint decreased from 31.7 $m{\Omega}$ to 13.8 $m{\Omega}$. Even after thermal cycles of 1000 times ranging from $-45^{\circ}C$ to $125^{\circ}C$, the Cu pillar flip chip joints exhibited the contact resistance increment below 12% and the shear failure forces similar to those before the thermal cycling test. The contact resistance increment of the Cu pillar flip chip joints was maintained below 20% after 1000 hours storage at $125^{\circ}C$.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.4
• /
• pp.61-70
• /
• 1999

Cracking was observed in beam-to-column connections of many steel building frames during the 1994 Northridge and 1995 Kobe earthquakes. Thus extensive experimental researches are currently being conducted to improve the seismic performance of steel frames. A value of 0.015 radian was considered as a reasonable estimate of beam plastic rotation demand in steel moment-resisting frames subjected to severe earthquakes. The objective of this research is to develop a type of connection detail which moves the plastic hinge region in the beam away from the face of the column and can prevent cracking at the welded flange of the beam-to-column connection under seismic loading. An experimental investigation was undertaken on five beam-to-column connection specimens to study the performance of the connections with proposed details. The experiemental results showed that the flexural strength and rotational ductility of the beam connections were adequate for the seismic resistance steel frames to prevent possible cracks at the connections.

• Korean journal of applied entomology
• /
• v.25 no.1 s.66
• /
• pp.27-32
• /
• 1986

To establish a method for measuring varietal resistance against rice stem maggot in field and pot, 20 varieties were used in $1981{\sim}1983$. The degree of injured stems by the 1st generation larvae was significantly correlated with that of injured panicles by the 2nd ($r=0.864^{**}$). There was no ovipositional preference in rice stem maggot. The larval mortality after artificial infestation varied widly from 5.6 to 100% in varieties and that of the resistant varieties was high after boring. There was a negative correlation between number of injured leaves and larval mortality after artificial infestation ($'81:r=-0.833^{**},\;'82:r=-0.918^{**}$). It is considered that larval mortality mainly caused by antibiosis and larval mortality 20 days after infestation on rice seedlings is ideal for evaluating the varietal resistance to rice stem maggot. Resistant varieties are Nagdongbyeo, Jinjubyeo and Chucheongbyeo susceptible varieties, Keumgangbyeo, Milyang 23, Baigyangbyeo and Milyang 30.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.577-584
• /
• 2012

Carbonation resistance is one of the most influencing factors on durability of concrete. Alkali activated slag (AAS) is known to have weaker resistance for carbonation than OPC due to the low calcium contents. In this paper, the carbonation characteristic of AAS mortar which is related to the basicity (CaO/$SiO_2$) was investigated. In order to give the various basicity conditions, SM (source material) was blended with quicklime (CaO) and silicon dioxide ($SiO_2$) by adopting mechano-chemical treatment method. Experiments including flow test, compressive strength test, carbonation depth test, together with XRD, FTIR and TGA were employed to evaluate the effects of basicity of SM on the carbonation characteristics. The test results showed that the carbonation resistance effectively increased with the increase of the basicity of SM.