• Journal of the Korean Magnetics Society
• /
• v.8 no.5
• /
• pp.288-294
• /
• 1998

Effect of degree of intermixing at the Ta/NiFe interface induced by varying applied substrate bias voltage during NiFe free layer deposition on change of magnetoresistance in Substrate/Ta/NiFe/Cu/NiFe/FeMn/Ta spin valve multilayers was investigated. It was found that the optimum NiFe free layer thickness showing a maximum MR increase with increasing the bias voltage. The increase of the optimum thickness was due to the increase of the intermixed layer thickness with a bias voltage. The weak ferromagnetic or non ferromagnetic intermixed layer plays as a spin-independent scattering region and does not contribute on spin-dependent scattering. The existence of the intermixed layer was proved by the means of electrical resistivity and magnetization changes. In the present study, the optimum "effective" free layer thickness which gives the highest MR ratio was a constant independent of the magnitude of the bias voltage we have used.have used.

• Journal of Digital Convergence
• /
• v.19 no.7
• /
• pp.129-138
• /
• 2021

Many organizations are applying robotic process automation (RPA) to automate repetitive and rule based tasks to enhance the accuracy and efficiency of works. Some members are willing to join the projects hoping to eliminate annoying and meaningless tasks, but others are resisting this innovation fearing that they may lose their jobs. In this study, both positive and negative antecedents are posited to influence the performance in adopting RPA. The effects of relative advantage, compatibility, change management effect, innovation resistance and satisfaction, conclusively to performance improvement were examined via a survey of 109 employees involved in the 11 RPA projects in a manufacturing company, and the structural equation model analysis. The research considering the consumer characteristics of the innovation resistance model can be followed for the development of individualized change management strategy.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.155-160
• /
• 2010

The effect of process temperature of a final annealing step in the fabrication of phase change memory (PCM) devices was investigated. Discrete PCM devices employing $Ge_2Sb_2Te_5$ (GST) films as an active element were made in a pore-style configuration, and they were annealed at various temperatures ranging from 160 to $300^{\circ}C$. The behaviors of cell resistance change from SET resistance to RESET resistance were totally different according to the annealing temperatures. There was a critical annealing temperature for the fabrication of normal PCM devices and abnormal operations were observed in some devices annealed at temperatures lower or higher than the critical temperature. Those influences of annealing temperature seem closely related to the thermal stability of a top electrode/GST/heating layer multilayer structure in the PCM devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.693-696
• /
• 2006

In this study, we made the system to measure variation of blood flow using bio-electrical impedance analysis method. The system, which could measure variation of impedance according to pressure change by artificial pressure, consists of pressure measurement and impedance measurement by 4-electrode method. Pressure measurement splits into semiconducting pressure sensor and electronic circuit for processing output signal. In addition, impedance measurement splits into constant current source circuit and lock-in amplifier for detection impedance signal. We experimented feature of impedance measurement using standard resistance to evaluate the system characteristic. As well as, we experimented to estimate variation of blood flow by measuring impedance and blood flow resistance ratio using mean arterial pressure and variation of blood flow with experimental group. As result of this study, blood flow resistance ratio and variation of blood flow were definitely in inverse proportion and were -0.96776 as correlation coefficient by correlation analysis.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.224-225
• /
• 2006

접지설비는 전력계통의 안정적인 운전을 유지하고 사고시 고장전류를 대지로 안전하게 방전시켜 사람과 전기설비의 안전을 확보하는 데 그 목적이 있다. 접지설계시 대지저항률은 중요한 설계인자로 대지저항률 변동에 따른 접지설계 방법을 접지 설계프로그램을 이용하여 비교, 분석하였다.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.6
• /
• pp.76-84
• /
• 2001

수중익선과 같은 고속선의 경우 수중익이 수면근처에 접근하면 여러형태의 파를 유기하게 되며 그에 의한 압력의 변화를 유발시킨다. 이에따라 양력이 감소하고 조파저항이 증가하다가 한계 Froude 수에 이르게 되면 파가 더이상 자신의 형태를 유지하지 못하고 부서지는 쇄파가 발생하면서 조파저항은 감소하고 그대신 쇄파저항이 급격히 증가하게 된다. 이에대한 연구의 한 방법으로 수면하에서 정속으로 움직이는 수중익에 의하여 생성되는 정상파 및 쇄파현상에 대한 연구를 회류수조에서 수행하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.413-413
• /
• 2013

대면적 터치패널은 현재까지 저항막 방식, 적외선, Camera 방식을 주로 사용하고 있다. 저항막 방식의 Sensitivity, 높은 가격, 적외선 방식의 경우 빛의 간섭에 의한 오동작이 일어날 수 있는 문제를 가지고 있다. 최근의 Mobile용 터치스크린은 정전용량 방식의 터치기술 채택으로 저항막, 적외선, Camera 방식의 모든 단점을 해소할 수 있으나 터치 스크린 면적이 커지게 되면서 요구저항을 맞출 수 없는 문제로 현재 크기의 제한적이다. 본 연구에서는 완전일체형 터치(G2 Touch Hybrid) 방식의 ITO 터치필름을 사용하지 않고, 강화유리 기판을 사용하여 저(低)저항, 고(高)투과, 대형화(15 Inch), 경량화를 고려한 Zero-gap ITO를 코팅한 커버 유리용 투명전극에 대하여 전기적, 광학적, 구조적, 표면적 특성을 분석하였다. ITO 박막의 두께를 최소화하여 패턴 인비저블의 특성을 갖는 것이 필요로 하는데, 이는 ITO박막 패턴후에 패턴이 보이지 않게 하기 위해서이며, 이러한 시장의 요구를 충족하기 위해 RF/DC 고자력 Magnetron Sputtering System을 사용하여 면저항 $80{\Omega}$/${\Box}$, 표면특성 Rp-v 2.1 nm, 최고 광투과율 90.5%@550 nm, 반사율 차이 0.5 이하의 특성을 확인하였다. 또한, 저항 경시변화를 줄이기 위해서 Sheath heater를 이용한 진공코팅 중 발생되는 BM Ink out-gassing을 줄여 out-gassing에 의한 박막 손상을 줄일 수 있었으며 진공 성막중 결정성을 갖는 ITO 막을 형성시킬 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.331-337
• /
• 1994

The scatting problem by E-polarized plane wave with obique incidence on a tapered resistive strip grating with zero resistivity(perfectly conducting) at strip-edges is analyzed by the method of moments in the spectral domain. Then the induced surface current density on the strip is expanded in a series of Chebyshev polynomials of the second kind. The expasion coefficients are calculated numerically in the spectral domain, the numerical results of the geometric-optical reflection coefficient for the tapered resistivity in this paper are compared with those for the existing uniform resistivity. And the position of sharp variation points in the magnitude of the geometric-optical reflection coefficient can be moved by varying the incident angle and the strip spacing, It is found out that these sparp variation points are due to the transition of higher mode between the propagation mode and the evanescent mode.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.351-355
• /
• 2019

Load resistance factors for the limit state design of vertical caisson breakwaters are presented. Reliability analysis of 16 breakwaters in nationwide ports was conducted to calculate the partial safety factors and they were converted into load and resistance factors. The final load resistance factor was calibrated by applying the optimization technique to the individually calculated load resistance factors. Finally, the breakwater was redesigned using the optimal load resistance factor and verified whether the target level was met. The load resistance factor according to the change of the target reliability level is presented to facilitate the limit state design of breakwater.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.69-79
• /
• 2010

In order to reduce leakage from a reservoir, a large amount of cement milk (grout) was injected from boreholes drilled around the shores of the reservoir, and monitored to establish the infiltration of cement milk into the bedrock under the reservoir. From laboratory tests using rock core samples, it was revealed that the resistivity of cement milk is much lower than that of the groundwater at this location. Therefore, it was expected that the resistivity of the zones filled with cement milk would be significantly reduced. Geophysical surveys are expected to be suitable methods to check the effectiveness of grouting in improving the water-retaining performance of a reservoir. DC electrical surveys (seven in total) and two Controlled Source Audio-frequency Magneto-Telluric (CSAMT) surveys were conducted along survey lines in the reservoir to monitor the infiltration of cement milk during the grouting. Extremely low resistivity zones ($10\;{\Omega}m$ or less) were observed in resistivity sections obtained by 2D inversion. The zones are inferred to be fractured zones filled with cement milk. In sections showing the rate of change of resistivity, three zones that showed significant change showed gradual expansion to deeper parts as the grouting progressed. These zones correspond to highly permeable zones detected by Lugeon tests at grout boreholes. We have confirmed that it is possible to measure the resistivity change by DC electrical and CSAMT surveys from the surface of the reservoir. It seems that such monitoring results could be reflected in future grouting plans.