• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.70-70
• /
• 2011

차세대 저항 메모리로 활용 가능한 ZnO 박막의 저항 변화 특성을 평가하였다. ZnO 박막은 Pt/Ti/SiO2/Si 기판 위에 스퍼터링 시스템을 이용하여 약 50nm 두께로 증착되었다. 증착된 박막에 전극을 evaporator를 이용하여 패턴닝 함으로써 전극-반도체-전극 구조의 소자를 만들고 전기적 특성을 평가하였다. 비교적 높은 compliance current (이하Icomp)를 설정한 경우 unipolar 저항 변화특성을 나타낸 데 비해 비교적 낮은 Icomp를 설정한 경우 bipolar 저항 변화특성을 나타내었다. 두 서로 다른 저항 변화 특성은 100cycle 이상 안정적으로 재현성 있게 나타났으며 이때의 저항비는 약 $10^3$ 정도를 나타냈다. 본 결과를 바탕으로 필라멘트 이론에 기초한 저항 변화 메커니즘을 설명하는 모델이 제시되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.607-607
• /
• 2013

차세대 비휘발성 메모리 소자로서 각광받고 있는 저항 변화 메모리(resistive switching random access memory; ReRAM) 소자는 속도가 빠르고, 에너지 소모가 적으며, 고집적화를 이루기 용이하다는 강점을 보유하고 있다. 지금까지 저항변화 물질의 최적화를 위해 매우 다양한 물질들이 연구되고 있으며, 그 물질에 따라 스위칭 메커니즘 및 동작 방법이 다르게 보고되어 왔다. 하지만 저항변화 메모리의 스위칭 거동은 전형적인 전기적 제어 조건으로부터 구현되었기 때문에 한정된 소자 특성을 나타낼 수밖에 없었다. 본 연구에서는 새로운 메모리 제어 조건으로 빛을 이용함으로써 한정된 소자 특성으로부터 벗어나고자 하였다. 저항 변화 물질로 잘 알려진 ZnO를 표면적이 넓은 형태로 합성하기 위하여 hydrothermal 방법으로 FTO 기판 위에 수직하게 배열된 ZnO 나노와이어를 형성하고 그 위에 Au 상부 전극을 형성하여 금속-절연체-금속 소자 구조를 제작하였다. 본 연구에서는 전형적인 전기적 제어 조건에 더불어 빛의 입사 유무 조건을 바꿔가면서 Au/ZnO 나노와이어/FTO 소자의 저항 변화 특성을 평가 하였을 뿐만 아니라 전기적 인가 없이 오직 빛만으로 두 가지 안정한 저항 상태를 반복적으로 전환하는 특성을 유도하였다. 본 결과를 바탕으로 필라멘트 이론에 기초한 저항 변화 메커니즘을 설명하는 모델이 제시되었다.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.652-656
• /
• 1998

$(Ba_{0.8-x}Sr_{0.2})Y_xTiO_3\;(BSYT)$ powders were prepared by the calcination of metal-oxalate precipitates, which were obtained by wet chemical method using Ba, Sr, Y and Ti-nitrates and oxalic acid. Yttrium content, sintering temperature and cooling rate were taken as experimental factors. Response surface method was applied to modelling of the room temperature resistivity of BSYT. The results indicated that the Yttrium content had larger effect on the room temperature resistivity and minimum room temperature resistivity was at Yttrium content of 0.24 mol%. The validity of a modelling equation was confirmed by comparing the measured room temperature resistivity with the calculated one.

• Geophysics and Geophysical Exploration
• /
• v.16 no.4
• /
• pp.217-224
• /
• 2013

We developed a time-lapse inversion using new cross-model constraints based on change ratio and resolution of model parameters. The cross-model constraint based on change ratio imposes the same penalty on the model parameters with equal change ratio. This constraint can emphasize the model parameters with significant change regardless of their increase or decrease. The resolution cross-model constraint imposes a small penalty on the model parameters with poor resolution, but a large penalty on the model parameters with good resolution. Thus, the model parameter with poor resolution can be effectively identified in the inversion result if they are significantly changed with time. Through the numerical tests for 3D resistivity monitoring data sets, the performance of these two cross-model constraints was confirmed. Finally, for the safety estimation of a sea dyke, we applied the developed time-lapse inversion to the 3D resistivity monitoring data that were acquired at a sea dike located in western coastal area of Korea. The result of time-lapse inversion suggested that there were no significant changes at the sea dike during the monitoring period.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.289-295
• /
• 2013

The capacity of a pressure fan can be designed based on the air flow resistance of containers packed with fruits and vegetables in a pressure cooling system. This study was conducted to develop an air flow resistance model that was dependent on changes in the air flow rate and the method of stacking containers. The air flow resistance of a container packed with uniformly shaped balls was 1.5 times greater than the sum of the air flow resistance of a vacant container and that of a wire net container packed with only balls. In addition, the air flow resistance increased exponentially as the width of the stacks increased; however, the air flow resistance did not increase greatly as the length and height of the stacks increased, which indicates that the air flow resistance is primarily influenced by the width of the stack in the air flow direction. The air flow resistance in two lines of stacking was up to 17% less than that of the width of the stack. It was also possible to determine the air flow resistance using a function of the air flow resistance through a single container and develop a prediction model. A prediction model of air flow resistance that is dependent on the stacking method and the air flow resistance of a single container was developed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.241-244
• /
• 2008

In general, RC flat plate frames have been used as a gravity load resisting system(GLRS) in building. This system should be constructed with lateral force resisting system(LFRS) such as shear walls and brace frames. When lateral loads such as earthquakes occur, LFRS undergo displacement by which connected gravity systems experience lateral displacement. Thus, flat plate system designed as GLRS should be predict unbalanced moments and punching failure due to lateral deformation. This study developed an analytical mode for predicting nonlinear behavior of RC slab column connection for the seismic performance evaluation of RC flat plate frames. For verifying the analytical model, the test results of two flat plate specimens having two continous spans with the difference gravity shear ratio($V_g/{\phi}V_c$) were compared with the results of analysis. The developed model can predict the failure modes and punching failures.

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.139-149
• /
• 2018

The resistivity monitoring is a practical method to resolve changes in resistivity of underground structures over time. With the advance of sophisticated automatic data acquisition system and rapid data communication technology, resistivity monitoring has been widely applied to understand spatio-temporal changes of subsurface. In this study, a new 4D inversion algorithm is developed, which can effectively emphasize significant changes of underground resistivity with time. To overcome the overly smoothing problem in 4D inversion, the Lagrangian multipliers in the space-domain and time-domain are determined automatically so that the proportion of the model constraints to the misfit roughness remains constant throughout entire inversion process. Furthermore, a focusing model constraint is added to emphasize significant spatio-temporal changes. The performance of the developed algorithm is demonstrated by the numerical experiments using the synthetic data set for a time-lapse model.

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.224-230
• /
• 1998

The relationships between R-H curves of gaint magnetoresistance (GMR) spin valve trilayer films and M-H curves of each magnetic layer consisting of the trilayer films were analyzed and simple formula representing the relations between the curves were suggested for theoretical analysis and study of magnetoresistance (MR) in those films, especially where the MR is from the difference of coercivity. Using two kinds of NiFe/Cu/Co films, which had been deposited on Cu(50 $\AA$)/Si(111, 4$^{\circ}$ tilt-cut) and Cu(50 $\AA$)/glass, R-H and M-H curves were measured and compared with the calculated ones, which were obtained by appying the M-H curves of single NiFe and Co films, deposited on the same substrates, to the previously reported single-domain and multi-domain models. The calcuated ones were well consistent with the measured ones and the suggested simple relationships between R-H and M-H curves are thought to be very useful for the deep understanding of MR behavior and the reasonable approach to improve MR properties in GMR spin valve trilayer films.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.306-308
• /
• 2008

본 논문은 정면 밀링 가공에서의 절삭력 예측을 위한 수학적 모델을 설정하고 컴퓨터 시뮬레이션을 수행하였다. 실험으로 얻은 절삭력 데이터를 이용하여 비절삭 저항을 모델링하였고 컴퓨터 시뮬레이션을 통해 절삭력을 예측하였다. 예측된 절삭력은 실제 실험을 통해 얻은 절삭력과 비교하여 본 모델의 타당성을 검증하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.2 s.20
• /
• pp.115-121
• /
• 2006

In recent years vibration control damper made of low yield point steel is expected to play an important role in controlling structural vibration induced earthquake and wind. But their dynamic characteristics and energy dissipation effects on the whole structure model are not clarified. In this paper, firstly, we presents the results of cyclic tests on low yield steel dampers. Secondly, forced vibration tests on existence three stories steel structure model with low yield point steel dampers are presented. Lastly, it is estimated energy amount which is dissipated through the hysteresis dampers by using two types of analytical models, hysteresis model and equivalent linear model.