• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.224-230
• /
• 1998

The relationships between R-H curves of gaint magnetoresistance (GMR) spin valve trilayer films and M-H curves of each magnetic layer consisting of the trilayer films were analyzed and simple formula representing the relations between the curves were suggested for theoretical analysis and study of magnetoresistance (MR) in those films, especially where the MR is from the difference of coercivity. Using two kinds of NiFe/Cu/Co films, which had been deposited on Cu(50 $\AA$)/Si(111, 4$^{\circ}$ tilt-cut) and Cu(50 $\AA$)/glass, R-H and M-H curves were measured and compared with the calculated ones, which were obtained by appying the M-H curves of single NiFe and Co films, deposited on the same substrates, to the previously reported single-domain and multi-domain models. The calcuated ones were well consistent with the measured ones and the suggested simple relationships between R-H and M-H curves are thought to be very useful for the deep understanding of MR behavior and the reasonable approach to improve MR properties in GMR spin valve trilayer films.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.110-117
• /
• 1995

본 연구는 퍼지모델링을 이용한 고속 소형선의 전체 저항곡선 및 마력곡선을 고속 소형선의 선형요소 자료들로부터 퍼지모델링 알고리즘을 통해 도출하고, 그 결과를 모형시 험 결과와 비교하고 있다. 또한 퍼지모델링 알고리즘에 의한 전체 저항곡선 및 마력곡선이 고속 소형선의 선형요소 결정에 효율적으로 적용됨을 보이고 있다.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.24-32
• /
• 1983

전기 동저항 제어실험을 통해 다음과 같은 결론을 얻었다. (1) 점용접 과정에서 동 저항이 용접질(용접강도)을 잘 나타내 준다. 1) 동저항 곡선의 peak가 발생하는 시간이 이르면 일반적으로 늦게 나타난 것보다 용접질이 좋다. (단, expulsion이 발생하지 않을 때까지). 2) peak에서의 저항값과 용접시간 끝에서의 저항값 차이가 클수록 일반적으로 용접질이 좋다. (2) 한 동 저항곡선에 다른 동 저항곡선을 맞추려는 제어를 할 때는 다음과 같은 관계가 있다. 1) P-control로는 동저항을 추적하는 효과를 충분히 얻을 수 없고 적분제어기를 추가한 PI-control을 하면 잘 추적한다. 2) 용접질의 관점으로 볼 때 원하는 용접강도를 얻으려고 PI제어를 하면 그 용접 평균강도에 아주 근사한 강도를 얻을 수 있다.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.109-112
• /
• 2012

선박의 저항을 추정하는 일은 선박설계에 있어 가장 기본적인 작업이다. 그러나 선박의 크기는 매우 크기 때문에 일반적으로 모형선 실험을 통해 선박의 저항을 추정한다. 이 때, 모형선 실험은 Froude 수를 기준으로 수행하게 되는데 이 때문에 모형선과 실선의 Reynolds 수가 서로 다른 영역에 놓이게 된다. 따라서 모형선 실험에서 얻어진 데이터를 실선에 그대로 적용할 수 없기 때문에 모형선-실선 저항추정법을 사용하게 된다. 본 연구에서는 이러한 모형선-실선 저항추정법에 사용되고 있는 2 차원 외삽법을 살펴보고 이 기법에 사용되고 있는 ITTC 마찰저항곡선을 등가평판 주위의 유동장 해석결과와 비교하였으며 ITTC 마찰저항곡선에 대해 고찰하였다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.210-215
• /
• 1995

$Glass\Cr_{40\AA}\{[Cr_{10\AA}\NiFe_{50\AA}]}_N$ multilayers (number of layer N = 1, 2, 3, 4, 5, 6, 10) were made by dc magnetron sputtering under magnetic anisotropy of 200 G. Magnetoresistance curve MR(xx), MR(xy) were measured for the parallel and perpendicular current direction to external magnetic field. MR(xx) curves for the number of layer N=1, 5, 10 were almost became about zero percent, however the curves of other numbers appeared the phenomena of "positive magnetoresistance" that the resistance increased to external magnetic field, and the irregular and reversed curves in the vicinity of H=0 Oe.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.1-8
• /
• 1995

This paper is presented determination of the hull form factors about a high speed coastal fishing boat using Fuzzy modeling. That is, the estimation curves of total resistance & EHP(Efficiency Horse Power) are induced by Fuzzy modeling algorithm from data of accumulated hull form factors and are compared with the results of model test. Also, the estimation curves of total resistance & EHP are utilized efficiently in determination the hull form factors about a high speed coastal fishing boat.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.364-369
• /
• 2010

Resistivity data should be edited before the inversion because resistivity data are contaminated by a lot of noise. Generally, outlier or data violating pants-leg effect in dipole-dipole array were used to be rejected in the apparent resistivity pseudo-section. For more precise data editing, normalized voltage curves are used. In this study, we analyzed the behavior of normalized voltage curves for pole-pole, pole-dipole and dipole-dipole arrays in the presence of threedimensional inhomogeneities, and finally re-examined the validity of normalized voltage curves in the editing process of resistivity data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.757-764
• /
• 2014

In this study, the effect of shape parameters on the J-R curves of curved CT specimens was evaluated using the limit load method. Fracture toughness tests considering the shape factors L/W and $R_m/t$ of the specimens were also performed. Thereafter, the J-R curves of the curved CT specimens were compared using the J-integral equation proposed in the ASTM (American Society for Testing and Materials) and limit load solution. The J-R curves of the curved CT specimens were also compared with those of the CWP (curved wide plate), which is regarded to be similar to real pipe and standard specimens. Finally, the effectiveness of the J-R curve of each curved CT specimen was evaluated. The results of this study can be used for assessing the applicability of curved CT specimens in the accurate evaluation of the fracture toughness of real pipes.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.357-364
• /
• 2002

The resistance curves (R-curves) for 381 m crack extension of CLWL-DCB specimens had been determined. The average velocities of the crack extension measured with strain gages were 0.70 and 55 ㎜/sec. The measured rotation angle of the notch faces showed the existence of the singularity at least before 171 and 93 mm crack extensions for the 0.70 and 55 ㎜/sec crack velocities, respectively. The maximum slopes of the R-curves occurred between 25 and 89 ㎜ crack extensions for 0.70 ㎜/sec crack velocity and between 51 and 127 ㎜ crack extensions for 55 ㎜/sec crack velocity During the maximum slopes of the R-curves, the micro-crack localization can be expected, and faster crack velocity may form longer micro-cracking and micro-crack localizing zones. The fracture resistance of 0.70 ㎜/sec crack velocity reached a roughly constant maximum value of 143 N/m at 152 ㎜ crack extension, while that of 55 ㎜/sec crack velocity increased continuously to 245 N/m at 254 ㎜ crack extension and then decreased to the value of 0.70 ㎜/sec crack velocity. The R-curve of 55 ㎜/sec crack velocity was similar to that of the small size three-point bend test, and it showed that small size specimen or fast crack velocity could cause more brittle behavior.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.3
• /
• pp.311-320
• /
• 2014

High strength concrete is not only vulnerable to the occurrence of spalling which generates the loss of cross-section in concrete structures but produces faster degradation in its mechanical properties than normal strength concrete in the event of fire. This study aims to evaluate fire resistance of high strength segment concrete with PET fibers mixed to prevent spalling under ISO834 (2hr) and RABT fire curve. As results, the samples without PET fibers show the concrete loss up to the depth of about 8 cm and 9.5 cm from the surface exposed to fire under ISO834 and RABT fire curve respectively. The samples mixed with PET fiber of 0.1% show no spalling under ISO834 fire curve and the spalled thickness of 6.5 cm under RABT fire curve after the fire tests. Finally, the sample mixed with PET fiber of 0.2% shows no spalling under RABT fire curve. The results indicate that the suitable amounts of PET fiber for securing fire resistance performance of this high strength segment concrete are 0.1% under ISO834 fire curve and 0.2% under RABT fire curve. However, even though spalling does not occur, it is necessary to repair the deterioration of concrete up to 4 cm from the surface exposed to fire after fire.