• Magazine of RCR
• /
• v.11 no.1
• /
• pp.20-23
• /
• 2016

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.403-405
• /
• 2002

• Cement Symposium
• /
• s.45
• /
• pp.87-94
• /
• 2018

• Mineral and Industry
• /
• v.18 no.1
• /
• pp.1-17
• /
• 2005

국내의 납석 광상은 대부분 백악기의 화산암류들이 열수변질되어 형성된 광상으로서, 주로 전남 및 경남 지역에 밀집되어 분포한다. 납석은 지질 여건상 주로 경상분지 내에 국제적인 규모의 풍부한 부존자원이 있지만, 그 동안의 개발에 의해서 고품위 황석들은 상당히 채진된 상황이다. 현재 개발되고 있는 광체들은 몇 곳의 광산을 제외하고는 대부분 저품위 광상을 이루고 있기 때문에, 새로운 광체의 탐광이 이루어지지 않는다면 앞으로 고품위 광석에 관한 한 국내의 수요를 충당하기 어려운 상황에 이를 것으로 예견된다. 현재 국내에서 납석으로 개발되고 있는 광석의 상당수(대략 $40\%$ 정도)가 엄밀한 의미에서는 사실상 납석이 아닌 고령토나 견운모 광석인 것으로 밝혀졌다. 엽납석을 함유하는 정상적인 형태의 납석들은 그수반 점토광물상에 의거하여 (l) 엽납석질, (2) 딕카이트질. (3) 일라이트질 및 (4) 딕카이트-일라이트질 유형으로 구분될 수 있다. 고령토 광물로는 대부분 딕카이트가 수반되고 외국에서는 흔히 수반되는 것으로 알려져 있는 고령석은 거의 함유되지 않는 것이 특징이다. 석영은 납석에서 점토광물 못지않게 그 용도를 가름하는 주요 성분으로서 대부분의 광석 유형에서 수반되지만 특히 일라이트질 납석에서 흔히 그리고 보다 많이 수반되는 양상을 보인다. X-선회절 정랑분석법은 납석의 품위를 산정하는데 유력한 수단이 될 수 있다. 특히 납석 이외의 점토광물들의 조성, 특히 일라이트의 함유 정도는 납석의 용도별 품위와 품질을 가름하는 주요 사항이다. 화학분석에 의한 납석의 평가 방식은 특히 납석의 백색 도기류와 같은 각종 세라믹스 제조 용도에서의 품질 평가에 결정적인 단서를 제공하는 유력한 평가수단이다. 특히 착색유발 성분인 철분의 존재와 그 함량을 정하고 요업용도에서 중요한 $Al_3O_3$와 알칼리 성분 함량을 검증하는데 필수적인 평가 방법이다. 이외에 주사전자현미경 관찰을 통해서 납석의 주요 품질 기준이 되는 극미립상 엽납석의 결정형, 조직 및 미시적 산출상태를 보다 정밀하게 평가할 수 있는 방안을 제공한다. 현행 광업법상의 납석을 비롯한 관련 광종들의 광물분류 체계가 모호하게 설정되어 있고 관련 인허가 부서에서의 전문성 및 지도력 부족으로 관련 산업계에 심각한 비효율성과 오류가 야기되고 있는 실정이다. 이를 개선하기 위해서는 납석의 광석평가 방식이 그 품위와 품질 개념 하에서 응용광물학적으로 적용되어야 할 것이다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.4
• /
• pp.11-20
• /
• 2015

In the present work, a basic study on the in-situ biogenic methane generation from low grade coal bed was conducted. Lignite from Indonesia was used as a sample feedstock. A series of BMP (Biochemical Methane Potential) tests were carried out under the different experimental conditions. Although nutrients and anaerobic digester sludge were added to the coal, the produced amount of methane was limited. Both temperature control and particle size reduction showed little effect on the increase of methane potential. When rice straw was added to lignite as an external carbon source, methane yield of 94.4~110.4 mL/g VS was obtained after 60 days of BMP test. The calorific value of lignite after BMP test decreased (4.5~12.1 %) as increasing the content of rice straw (12.5~50 wt % of lignite), implying that anaerobic digestion of rice straw led to partial degradation of lignite. Therefore, rice straw could be used as an external carbon source for the start-up of in-situ biogas generation from low grade coal bed.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.11
• /
• pp.1046-1053
• /
• 2010

The objective of this study was to investigate the pyrolytic reaction characteristics of a mixed fuel of municipal solid wastes and low-grade anthracite. The reaction variables are pyrolysis condition of mixing ratio, reaction temperature, temperature increase rate. As a result, the optimum mixing ratio was 20 wt.% low-grade anthracite in MSW, which maintains for the low heating value over 3,500 kcal/kg on pyrolysis. The most high reaction velocity constant was shown at $700^{\circ}C$. Also, under the all experimental condition, the reaction velocity constant increased linearly as temperature rate increase, but pyrolysis has to be considered electric power cost and yield of char at lower temperature rate.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.3-7
• /
• 2020

Recently, the gold leaching technologies draw much interest to recover gold from low grade ores. Current leaching processes mostly use cyanide as the leaching agent, due to its high leaching efficiencies and cost-effectiveness. However, use of cyanide is severely problematic, because of toxicity and thereby environmental risks, and requires strict regulations and environmental management. Especially, this issue becomes further apparent when cyanide should be applied for dump or heap leaching for low cost gold recovery along with recent trends. To resolve this issue, the alternative leaching processes using thiosulfate or halogen compounds, instead of cyanide, have been studied and developed but there have been lots of difficulties toward commercialization, and therefore further research should be conducted. The commercialization of dump or heap bioleaching technologies should be urgently required for effective direct biogenic gold recovery from low grade ores or tailings without use of cyanide.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.57-66
• /
• 2021

In this study, we attempted to separate and recover Cu from low-grade copper ore by a hydrometallurgical process. The leaching sample obtained after crushing and sieving by 0.355 mm of low-grade copper ore contained 1.5% Cu, 4.7% Fe, 1.0% Mn, and 0.3% Zn. The Cu in the oxide ore was very well leached into sulfuric acid and 97% Cu leaching efficiency was achieved at 80℃ and 3 M sulfuric acid (H₂SO₄). From the leaching solution, Cu was separated by solvent extraction from Fe, Mn, and Zn using LIX984N. The separation tendency between Cu and other metals was confirmed through the distribution ratio and separation factor. By plotting the McCabe-Thiele Diagram, the optimum condition for recovering Cu is 5 vol.% LIX984N, 2-stage counter-current solvent extraction, and an O/A ratio of 0.5. Using this method, 99% of the Cu was extracted and a CuSO₄ solution was finally obtained that contained 1.6 g/L Cu after the stripping process using 2 M H₂SO₄.

• Clean Technology
• /
• v.19 no.4
• /
• pp.469-475
• /
• 2013

In this research, the stabilization characteristics of upgraded coal using palm oil residues were investigated. The Eco coal, which is the Indonesian low-rank coal, was used as a raw material. The low-rank coal was mixed with palm fatty acid distillate (PFAD), and then dried in a nitrogen atmosphere at $107^{\circ}C$. The trend of spontaneous combustion of upgraded coal was studied by measuring of crossing-point temperature (CPT), low temperature oxidation and moisture readsorption. The results of the CPT measuring and low temperature oxidation showed that the propensity of spontaneous combustion of the upgraded coal was improved compared to the dried coal. The moisture readsorption characteristics of the upgraded coal was also improved. The upgraded coal was stabilized through the surface coating with PFAD, and stability of upgraded coal was proportional to the content of PFAD.

• Resources Recycling
• /
• v.23 no.4
• /
• pp.12-20
• /
• 2014

The objective of this study is to investigate the possibility of beneficiation of low grade iron ore. Iron ore A might be upgraded by the mineral liberation effect, while iron ore B was expected to be difficult to upgrade. However, the Fe contents of iron ore B were increased from 68% to 81% by the heat treatment process. Iron ore A was found to possibly enrich the Fe components through the physical separation process, such as magnetic separation, floatation and gravity concentration. In the case of iron ore B, it was possible to concentrate the Fe components through the heat treatment process.