• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.94-99
• /
• 2017

Breaking the rigid connection between the two faces of the wall can significantly improve the sound transmission loss of the wall. This is usually achieved by resiliently mounting the gypsum board on one of the two faces of the wall using resilient channel. Resilient channel with less stiffness than that of air cavity could move the resonance frequency of the light-weight wall. So we can get higher sound transmission loss at low frequencies for light-weight wall using resilient channel. It's sound transmission loss is 17 dB higher than that of single stud wall, and 5 dB higher than that of double stud wall.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.224-228
• /
• 2005

동적 감쇠자로서 백홀에 대한 동적 제어 테스트를 수행하였다. 공급라인에서 압력 섭동에 의해 발생되는 가진과 스월 인젝터의 내부 파동 분석을 위해 수력학적 진동발생기와 1차원 가시화 모델 인젝터가 제작되었다. 음향학적 대신에 동적 감쇠자로서 백홀의 영향에 초점을 두었기 때문에 액막의 분열길이와 액막 두께를 측정하여 정상 상태와 가진 상태의 결과를 비교하였다.

• 신재생에너지
• /
• 제2권3호
• /
• pp.10-14
• /
• 2006

We have designed and fabricated coil structures by gold electroplating technique. The thickness, width, and length are $7{\mu}m,\;20{\mu}m$, and 1.6m, respectively. With vibrating a magnet on the surface of a fabricated electroplated coil, the micro power generator produce an alternating voltage. We have changed the vibrational frequency from 0.5Hz to 8Hz. The generated voltage was 106mV at 3Hz and 198mV at 6Hz. We have rectified and stepped up the input voltage using a quadrupler circuit. After using the step up circuit, the measured voltage was 81mV at 3Hz and 235mV at 6Hz.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.324.2-324
• /
• 2002

If a sinusoidal excitation force moves back and forth along a structure with a certain frequency, the structure will be excited with the difference frequency of these two frequencies. A low frequency vibration shaker has been developed using this force frequency shifting without actually moving a shaker. The shaker consists of an ordinary eccentric mass shaker, a plate, constant springs, and time varying dampers. The dampers are fumed on and off in a sequential manner to simulate a traveling slide of an excitation force. (omitted)

• 한국음향학회지
• /
• 제14권5호
• /
• pp.58-62
• /
• 1995

무한배플에 고정된 사각형 진동체에 대한 자기방사 임피던스를 극좌표를 이용한 적분식으로 표시하고 이를 방사저항과 방사 리액턴스로 분리하여 수치해석 하였다. 해석의 결과를 접근방법이 다른 이론식의 결과와 비교하였다. 수치해석의 결과 다른 방법들은 저주파 영역에서 근사식을 사용하여 보정을 해준 반면 본 논문에서 사용된 적분식은 전 주파수 영역에서 제한조건 없이 잘 맞음을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
• /
• pp.223-230
• /
• 1995

본 연구에서는 선박소음해석을 수행하기 위한 기초작업으로서 실선 선박모델을 크게 3가지 경우로 구분하여 모델링 하였으며, SEA법을 적용하여 고체소음의 전달손실을 이론적으로 예측할 수 있는 방법을 제시하였으며, 또한 STL을 도입하여 각 요소간의 에너지 흐름 및 구성판요소의 재료별 방진효과를 알아보았다. 이 방법의 결과 다음과 같은 결론을 얻을 수 있었다. 1) 내장판의 종류에 따른 전달특성은 고주파 대역에서는 plywood, 저주파 대 역에서는 rockwool이 높은 손실값을 보였으며, glasswool은 전 주파수 대역에서 고른 손실값을 가짐을 확인하였다. 2) 기진원으로부터의 거리가 멀어짐에 따라 내장판의 효과가 크게 나타나며, 기진원의 근방 요소에서는 내장판의 효과보다는 강판의 두께의 영향이 두드 러짐을 알 수 있었다. 3) 내장판 요소중 plywood의 방진효과가 가장 크게 나타남을 알 수 있었다. 4) 본 SEA법에 의한 연구에서는 구성 판요소의 재질과 두께에 따른 고쳇음 의 전달특성을 이론적으로 해석하였으며, 차후 실험을 통한 검증이 요구되어 진다.

• 한국소음진동공학회논문집
• /
• 제16권9호
• /
• pp.958-963
• /
• 2006

The motion of a system composed of a plate, constant springs and varying dampers is considered when the system is subject to harmonic force. Letting the frequencies of harmonic force and damper variation $f_1\;and\;f_2$, respectively, the displacement at the center of the plate has the strongest component at frequency $f_1$. The angular displacement of the plate has strong components at $f_1-f_2$ and the natural frequency of the rotational mode of the system. If these two frequencies coincide, the plate oscillates with almost single frequency and a large amplitude. These results can be applied to development of a moment shaker with low frequencies.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1077-1080
• /
• 2002

In building acoustics, reverberation time is an important acoustic parameter. However, it is often difficult to measure short reverberation times at low frequencies using the traditional band pass filter bank if the product of bandwidth (B) and reverberation time (T) is small. It is well known that the minimum permissible product of bandwidth and reverberation time of the traditional band pass filter is at least 16 ［F. Jacobsen, J. Sound Vib. 115, 163-170 (1987)]. This strict requirement makes it difficult to measure short reverberation times of an acoustic room at low frequencies exactly. In order to reduce this strict requirement, recently, the wavelet filter bank is developed and the minimum permissible product of bandwidth and reverberation time is replaced with 4 [S. K. Lee, J, Sound Vib. 252, 141-153 (2002)]. In the present paper, it is demonstrated how the short reverberation times at low frequencies are successfully measured by using the wavelet filter bank. In order to present this job, two synthetic signals and one measured signal are used for impulse responses of an acoustic room.

• 소음진동
• /
• 제9권6호
• /
• pp.1123-1130
• /
• 1999

A system which is composed of a membrane and an air cavity is studied. To analyze the low frequency characteristics of a single membrane-cavity system, a plane wave model is derived. The relations among system variables, such as tension, density and stiffness, are investigated. Absorption coefficient has a maximum value at a peak frequency. In addition, a membrane-cavity system absorbs the low frequency noise with a band around peak frequency. This band is primarily determined by damping effect of the system. Furthermore, a multiple membrane-cavity system is investigated by using the transfer matrix method. To show the practical applicability of the proposed model, extensive experiments were conducted. Results show that a multiple membrane-cavity system can have broader noise reduction in the low frequency range than single.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.81-85
• /
• 2006

The motion of a system composed of a plate, constant springs and varying dampers is considered when the system is subject to harmonic force. Letting the frequencies of harmonic force and damper variation ${\Large f}_1\;and\;{\Large f}_2$, respectively, the displacement at the center of the plate has the strongest component at frequency ${\Large f}_1$. The angular displacement of the plate has strong components at ${\Large f}_1-{\Large f}_2$, and the natural frequency of the rotational mode of the system. If these two frequencies coincide, the plate oscillates with almost single frequency and a large amplitude. These results can be applied to development of a moment shatter with low frequencies.