• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.298-299
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.257-258
• /
• 2013

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.299-302
• /
• 1998

가야금과 바이올린의 소리 발생 특성을 이해하기 위하여 모드해석을 수행하였다. 바이올린과 가야금은 크게 현과 몸체 그리고 이 둘을 연결하는 부분으로 구성되어 있다. 소리는 이들의 유기적인 관계로부터 발생된다. 실험을 통해 살펴본 결과, 저주파 대역에서 바이올린의 진동은 크게 앞, 뒷판의 진동, 몸체와 목 부분 사이의 비틀림 진동, 바이올린 전체가 하나의 보처럼 진동하는 현상으로 나누어 볼 수 있었다. 가야금 상판의 진동 형상은 약간 휘어진 형태를 가지며, 전체적으로 평판의 진동과 같은 모습을 보였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.869-872
• /
• 2011

Ignition tests of an oxidizer rich preburner for a staged combustion cycle liquid rocket engine were performed to evaluate combustion performance. Design operation conditions of the tested oxidizer rich preburner are about 60 of OF ratio and 20 MPa of combustion pressure. The entire kerosene and some LOx injected into the mixing head is burned in combustion chamber and the remaining LOx injected through center holes of combustion chamber is vaporized. Full flow ignition method with hypergolic fuel was used. Each propellant was supplied in two stages for soft ignition. Test results, low frequency oscillation was occurred in low flow rate conditions under 45% of design flow rate. Stable ignition in the course of design combustion pressure was able to induce by minimization of low flow rate ignition region to escape low frequency oscillation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.329-333
• /
• 2005

This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we propose the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The current resolution of the vibration measurement is limited to sub centimeter scale. However, the frequency bandwidth and resolution can be enhanced by a high-speed and high-resolution image processing system.

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.171-187
• /
• 2007

The purpose of this study is to measure the lathe tool vibration and verify its usefulness using the fiber optic interferometeric sensor instead of using common accelerometer. To compare two vibration signals a Fabry-Perot fiber optic sensor(FOS) is directly attached to the left-side surface of the lathe tool and an accelerometer is attached near to the fiber optic sensor. Measurement signals from the FOS and theoretical results of receptance simulation are compared. When the amplitude of tool vibration increased the frequency shift phenomena was occurred. This means that mass effect occurred and vibration spectrum moved to the low frequency region. Generally this results is agreement to the regenerative chatter. The chatter frequency is not same as the natural frequency of the tool itself. The FOS can also applied to laboratory experiments for students. This experimental technique is perhaps the first attempts because of directly attachment technique. Therefore, suggested Fabry-Perot fiber optic sensor can be used to monitoring the tool wear and vibration.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1889-1893
• /
• 2000

During the test drive of developing vehicle, a low frequency vibration of sprung mass on front outer wheel has been frequently observed in cornering with some speed. The purpose of this paper is to investigate the low frequency vibration of the sprung mass. The analysis result shows that the low frequency vibration is caused by sudden migration of the center of gravity of vihicle and it is determined by geometric points of suspension.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.69-79
• /
• 2017

The purpose of this study is to reconsider the rating method for the floor impact sound insulation performance in current criterion. Although there are some arguments about proper standard heavy impact source with reproducibility of actual impact source in residence building, bang machine is adopted as the only standard heavy impact source in domestic criterion. To inspect the rating methods of evaluation criteria, this study conducted vibration test for both of standard heavy impact sources and actual impact sources. Using the test results, the floor impact sound insulation performance levels were assessed by each of several criteria. In addition, low frequency noise beyond current criteria was evaluated. Consequently, the floor impact sound levels have different performance levels according to adopted criteria, and measured floor impact sounds are bound to annoy the neighbors in the low frequency range. Current criteria does not consider the spectrum characteristics of floor impact sound according to impact sources and low frequency noise. This may cause the difference between the floor impact sound insulation performance level and human perception. Thus current criterion needs to be complemented to reflect the spectrum characteristics of floor impact sound levels according to impact sources and sound pressure levels in low frequency range.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.411-418
• /
• 2007

Exposure to low frequency noise(LFN) can lead to vibroacoustic diseases(VADs), which include a systemic disease with lesions in a broad spectrum of organs and a psychiatric condition. It is known that VAD is an established risk factor for the development of many psychological conditions in humans and rodents, including major depression and anxiety disorder. The present study investigated the effects of LFN on neuronal stress responses in the rat brain. The neuronal expression of the proto-oncogene c-fos in the paraventricular nucleus(PVN) of the hypothalamus and tyrosine hydroxylase(TH) in the LC was observed. The immunocytochemical detection of the Fos protein and TH has been used as a marker of neuronal activation in response to stress. In addition, corticosterone concentration was evaluated by using an enzyme-linked immunosorbent assay(ELISA). The LFN groups were exposed to 32.5Hz and 125Hz of noise(4hr/day for 2days). The numbers of c-fos and TH-immunoreactive cells in the PVN and LC were significantly increased in the LFN groups(32.5Hz and 125Hz) compared to the normal group. Corticosterone concentration in plasma was also increased in LFN groups. The present results demonstrated that exposure with LFN produced a pronounced increase in expression of c-Fos and TH in stress-relevant brain areas. These results suggest that the neural characteristics involved in LFN are similar to those activated by typical processive stressors. These results also suggest that the central and peripheral activations by LFN may be related to LFN-related negative behavioral dysfunctions such as VADs.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.94-100
• /
• 1997

In order to investigate the radiation of sound from the King Song-Duk bell, we measured the sound pressure around the bell at every 30$^{\circ}$ using a microphone line array which was composed of 30 microphones separated by 15cm;total number of measurement point was 360. The sound field was estimated by using cylindrical acoustic holography. The spectrum of measured sound pressure demonstrates that it is almost like white noise in the very beginning, but in 10 seconds two close frequency components(64.06Hz, 64.38Hz) remain and make a famous beating. This beating sound is often believed to make unique sound of the King Song-Duk bell. The mode shapes of that frequency components are the same except that one is rotated by 45$^{\circ}$ from the other. This phenomenon occurs at the other pairs of components are the same except ones in very high frequency range where the mode shapes are rather complex.