• Title/Summary/Keyword: 저장특성

Search Result 6,387, Processing Time 0.04 seconds

Processing and Quality Control of Flux Data at Gwangneung Forest (광릉 산림의 플럭스 자료 처리와 품질 관리)

  • Lim, Hee-Jeong;Lee, Young-Hee
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.10 no.3
    • /
    • pp.82-93
    • /
    • 2008
  • In order to ensure a standardized data analysis of the eddy covariance measurements, Hong and Kim's quality control program has been updated and used to process eddy covariance data measured at two levels on the main flux tower at Gwangneung site from January to May in 2005. The updated program was allowed to remove outliers automatically for $CO_2$ and latent heat fluxes. The flag system consists of four quality groups(G, D, B and M). During the study period, the missing data were about 25% of the total records. About 60% of the good quality data were obtained after the quality control. The number of record in G group was larger at 40m than at 20m. It is due that the level of 20m was within the roughness sublayer where the presence of the canopy influences directly on the character of the turbulence. About 60% of the bad data were due to low wind speed. Energy balance closure at this site was about 40% during the study period. Large imbalance is attributed partly to the combined effects of the neglected heat storage terms, inaccuracy of ground heat flux and advection due to local wind system near the surface. The analysis of wind direction indicates that the frequent occurrence of positive momentum flux was closely associated with mountain valley wind system at this site. The negative $CO_2$ flux at night was examined in terms of averaging time. The results show that when averaging time is larger than 10min, the magnitude of calculated $CO_2$ fluxes increases rapidly, suggesting that the 30min $CO_2$ flux is influenced severely by the mesoscale motion or nonstationarity. A proper choice of averaging time needs to be considered to get accurate turbulent fluxes during nighttime.

Effect of Topophysis and Uniting Method of Rootstock and Scion on Rooting and Subsequent Growth of Stenting-propagated (Cutting-grafted) Roses (접수의 채취부위 및 접수와 대목의 고정법에 따른 장미 접삽묘의 생육 특성)

  • Park, Yoo-Gyeong;Jeong, Byoung-Ryong
    • Horticultural Science & Technology
    • /
    • v.28 no.3
    • /
    • pp.456-461
    • /
    • 2010
  • A study was conducted to investigate the effect of topophysis, and uniting method of rootstock and scion on rooting and subsequent growth of stenting-propagated cut rose ($Rosa$ $hybrida$ Hort.) in an effort to develop an efficient stenting propagation method for domestic rose cultivars. Four cultivars used in this study were two standard type cultivars 'Sweet Yellow' and 'Hanmaum', and two spray type cultivars 'Chelsi' and 'May'. Scions were grafted on cuttings of a rootstock $Rosa$ $indica$ 'Major'. The stenting-propagated scion-rootstock unions were planted in rockwool cubes ($50{\times}50{\times}50mm$, Delta, Grodan, Denmark) and were placed in a graft-take chamber for five days before being placed on misted greenhouse beds. The rootstock was removed of all leaves and nodes. Both the base of scions and top of stocks were simultaneously cut at a $45^{\circ}$ angle for grafting. Scions were prepared as single node cuttings, each with a five-leaflet leaf. Three positions of topophysis used were 7-9th (top), 4-6th (middle), and 1st-3rd (bottom) nodes from the stem base. Four uniting materials used were tube, tube + parafilm wrap, tube + clothespin, and clothespin. Rooting and growth were affected by the topophysis and cultivar. The best topophysis for rooting was 7-9th (top) nodes in all cultivars. Topophysis affected percent rooting, and number of roots, length of the longest root, and but not weight, shoot length and graft-take. Rooting and growth were affected by the uniting method and cultivar. Tube uniting method generally showed higher percentage graft-take, percent rooting, and number of roots than other methods. However, rootstock and scion union was not complete in this treatment. On the whole, the greatest rooting and subsequent growth of stenting-propagated plants were found in the tube + clothespin method. Except 'Sweet Yellow', rooting and growth were not adequate in the clothespin method. The results suggested that a tube + clothespin method was the most effective, and this method may be used as a substitute to save labor compared to a tube + parafilm wrap method which is currently being used in commercial nurseries.

Molecular Characterization and Toxin Profile of Bacillus cereus Strains Isolated from Ready-to-eat Foods (유통 중인 즉석·편의식품류에서 분리한 Bacillus cereus의 산생 Toxin 및 분자유전학적 특성 조사)

  • Kim, Tae Sun;Kim, Min Ji;Kang, Yu Mi;Oh, Geune;Choi, Su Yeon;Oh, Mu Sul;Yang, Yong Shik;Seo, Jung-Mi;Ryu, Mi-Geum;Kim, Eun-Sun;Ha, Dong-Ryong;Cho, Bae Sik
    • Korean Journal of Food Science and Technology
    • /
    • v.46 no.3
    • /
    • pp.334-340
    • /
    • 2014
  • Toxin-producing Bacillus cereus is the causative agent of two different types of food poisoning: the emetic and the diarrheal types. This study was conducted to investigate the presence of enterotoxin and emetic toxin genes in 263 B. cereus isolated from 619 different ready-to-eat food items. Hemolytic enterotoxins hblA, hblC, and hblD were detected in 85.6, 41.1, and 76.8%, respectively, of the B. cereus isolates. About 67.0% (175/263) of the isolates presented all of three genes. Non-hemolytic enterotoxins nheA, nheB, and nheC were detected in 100, 97.0, and 68.4% of the isolates, respectively. Approximately 90.0% (236/263) of the isolates presented all of these three non-hemolytic enterotoxin genes. Emetic toxin gene, CER, was detected in 132 of 263 (50.2%) isolates. Computer-assisted cluster analysis of Rep-PCR profiles showed a high genetic diversity among the isolates. All B. cereus isolates from food samples tested in this study carried at least 6 of 10 toxin genes.

The Changes of Hardness and Microstructure of Dongchimi according to different kinds of water (물의 종류를 달리한 동치미의 경도 변화 및 세포벽 관찰)

  • 심영현;안기정;김지은
    • Korean journal of food and cookery science
    • /
    • v.20 no.1
    • /
    • pp.86-94
    • /
    • 2004
  • The purpose of this study was to investigate the changes of hardness and microstructure of Dongchimi cooked with various source of water(distilled water, purified water, Cho Jung Carbonated Natural water). This study was conducted to observe the changes of pH, total acidity, salt content, turbidity, texture and microstructure. Dongchimi cooked with source of water of water was fermented at 10$^{\circ}C$ for 46 days. The changes of pH on Dongchimi cooked with various source of water decreased in all samples during fermentation period, and then showed a slowly decrease after 12 days of fermentation. The total acidity of Dongchimi cooked with Cho Jung Carbonated Natural water was arrived slowly at best tasting condition 0.3 ∼ 0.4 point compared with other conditions. So Dongchimi cooked with Cho Jung Carbonated Natural water was continued to the best tasting condition for end of fermentation. At early stage of fermentation, the changes of turbidity of Dongchimi used Cho Jung Carbonated Natural water showed highly as compared with other test condition for 12th days of fermentation. The maximum cutting force of chinese radish of Dongchimi showed the highest value among all at the 25th day of ripening and then decreased gradually. The maximum cutting force of chinese radish of Dongchimi used Cho Jung Carbonated Natural water was the highest compared with other conditions at 25th day of fermentation. The calcium content of Dongchimi juice used Cho Jung Carbonated Natural water was observed hish at the early stage of fermentation and showed the highest value at 25th day of ripening. The calcium content of chinese radish and Dongchimi juice of Dongchimi cooked with water purifier was lower than that of Dongchimi cooked with Cho Jung Carbonated Natural water, and was higher than that of Dongchimi cooked with Distilled water at the early stage of fermentation. The magnesium content in all samples increased gradually from the early stage of fermentation. The microstructure showed disintegration appearance of middle lamella and cell wall during fermentation period.

Selection of Suitable Varieties for Organic Rice Farming in the Central Plain Area of Korea (중부평야지 벼 유기재배 적정 품종 선정)

  • Lee, Chae-Young;Park, Jae-Seong;Lee, Joung-Kwan;Kim, Eun-Jeong;Lee, Hee-Du;Choi, Ye-Seul;Kim, Ik-Jei;Hong, Seong-Taek;Kim, Chung-Kon;Woo, Sun-Hee
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.64 no.3
    • /
    • pp.176-184
    • /
    • 2019
  • The rice variety Chucheongbyeo is mostly cultivated for organic farming in the central region of Korea. This variety is more delicate than the recently developed varieties in rice yield, quality, and pest resistance, and is therefore, not suitable for organic farming. This study was conducted to select suitable varieties for organic rice farming in the central plain area of Korea. We tested 15 different varieties in the organic paddy field of Cheongju city from 2011 to 2013. As the experimental field had good fertility because it had been organically managed for many years, culm length and number of panicles developed better than the varietal characteristics. Daebo, Chinnong and Hyeonpum had slightly lower ripened grain ratio than Chucheongbyeo. The milled rice yield of Samkwang, Sukwang, Haiami, Cheonghaejinmi and Daebo increased by 9-18% compared to that of Chucheongbyeo. The protein content was under 7% for Cheongnam, Sukwang, Daebo, Samkwang, Hyeonpum, Chinnong, Chilbo, Hopyung, Hwangkeumnuri, Suryeojinmi and Jinsumi and under 6% for Sukwang and Samkwang. The whiteness was over 40 in Sukwang, Daebo, Samkwang and Jinsumi. The palatability grade and head rice ratio were good in Daebo, Sukwang, Samkwang and Jinsumi. Therefore, this study recommended Samkwang, Daebo, and Jinsumi as the optimal varieties for organic rice farming in the central plain area of Korea. These varieties could replace Chucheongbyeo, which is inferior to the recently developed varieties in terms of disease and pest resistance and yielding performance.

Distribution and Behavior of Soil CO2 in Pohang area: Baseline Survey and Preliminary Interpretation in a Candidate Geological CO2 Storage Site (포항 지역 토양 CO2의 분포 및 거동 특성 연구: CO2 지중저장 부지 자연 배경 조사 및 예비 해석)

  • Park, Jinyoung;Sung, Ki-Sung;Yu, Soonyoung;Chae, Gitak;Lee, Sein;Yum, Byoung-Woo;Park, Kwon Gyu;Kim, Jeong-Chan
    • Journal of Soil and Groundwater Environment
    • /
    • v.21 no.1
    • /
    • pp.49-60
    • /
    • 2016
  • Distribution and behavior of baseline soil CO2 were investigated in a candidate geologic CO2 storage site in Pohang, with measuring CO2 concentrations and carbon isotopes in the vadose zone as well as CO2 fluxes and concentrations through ground surface. This investigation aimed to assess the baseline CO2 levels and to build the CO2 monitoring system before injecting CO2. The gas in the vadose zone was collected using a peristaltic pump from the depth of 60 cm below ground surface, and stored at gas bags. Then the gas components (CO2, O2, N2, CH4) and δ13CCO2 were analyzed using GC and CRDS (cavity ringdown spectroscopy) respectively in laboratory. CO2 fluxes and CO2 concentrations through ground surface were measured using Li-COR in field. In result, the median of the CO2 concentrations in the vadose zone was about 3,000 ppm, and the δ13CCO2 were in the wide range between −36.9‰ and −10.6‰. The results imply that the fate of CO2 in the vadose zone was affected by soil property and vegetations. CO2 in sandy or loamy soils originated from the respiration of microorganisms and the decomposition of C3 plants. In gravel areas, the CO2 concentrations decreased while the δ13CCO2 increased because of the mixing with the atmospheric gas. In addition, the relation between O2 and CO2, N2, and the relation between N2/O2 and CO2 implied that the gases in the vadose zone dissolved in the infiltrating precipitation or the soil moisture. The median CO2 flux through ground surface was 2.9 g/m2/d which is lower than the reported soil CO2 fluxes in areas with temperate climates. CO2 fluxes measured in sandy and loamy soil areas were higher (median 5.2 g/m2/d) than those in gravel areas (2.6 g/m2/d). The relationships between CO2 fluxes and concentrations suggested that the transport of CO2 from the vadose zone to ground surface was dominated by diffusion in the study area. In gravel areas, the mixing with atmospheric gases was significant. Based on this study result, a soil monitoring procedure has been established for a candidate geologic CO2 storage site. Also, this study result provides ideas for innovating soil monitoring technologies.

Development Process and Methods of Audit and Certification Toolkit for Trustworthy Digital Records Management Agency (신뢰성 있는 전자기록관리기관 감사인증도구 개발에 관한 연구)

  • Rieh, Hae-young;Kim, Ik-han;Yim, Jin-Hee;Shim, Sungbo;Jo, YoonSun;Kim, Hyojin;Woo, Hyunmin
    • The Korean Journal of Archival Studies
    • /
    • no.25
    • /
    • pp.3-46
    • /
    • 2010
  • Digital records management is one whole system in which many social and technical elements are interacting. To maintain the trustworthiness, the repository needs periodical audit and certification. Thus, individual electronic records management agency needs toolkit that can be used to self-evaluate their trustworthiness continuously, and self-assess their atmosphere and system to recognize deficiencies. The purpose of this study is development of self-certification toolkit for repositories, which synthesized and analysed such four international standard and best practices as OAIS Reference Model(ISO 14721), TRAC, DRAMBORA, and the assessment report conducted and published by TNA/UKDA, as well as MoRe2 and current national laws and standards. As this paper describes and demonstrate the development process and the framework of this self-certification toolkit, other electronic records management agencies could follow the process and develop their own toolkit reflecting their situation, and utilize the self-assessment results in-house. As a result of this research, 12 areas for assessment were set, which include (organizational) operation management, classification system and master data management, acquisition, registration and description, storage and preservation, disposal, services, providing finding aids, system management, access control and security, monitoring/audit trail/statistics, and risk management. In each 12 area, the process map or functional charts were drawn and business functions were analyzed, and 54 'evaluation criteria', consisted of main business functional unit in each area were drawn. Under each 'evaluation criteria', 208 'specific evaluation criteria', which supposed to be implementable, measurable, and provable for self-evaluation in each area, were drawn. The audit and certification toolkit developed by this research could be used by digital repositories to conduct periodical self-assessment of the organization, which would be used to supplement any found deficiencies and be used to reflect the organizational development strategy.

Macroporous Thick Tin Foil Negative Electrode via Chemical Etching for Lithium-ion Batteries (화학적 식각을 통해 제조한 리튬이온 이차전지용 고용량 다공성 주석후막 음극)

  • Kim, Hae Been;Lee, Pyung Woo;Lee, Dong Geun;Oh, Ji Seon;Ryu, Ji Heon
    • Journal of the Korean Electrochemical Society
    • /
    • v.22 no.1
    • /
    • pp.36-42
    • /
    • 2019
  • A macroporous Sn thick film as a high capacity negative electrode for a lithium ion secondary battery was prepared by using a chemical etching method using nitric acid for a Sn film having a thickness of $52{\mu}m$. The porous Sn thick film greatly reduced the over-voltage for the alloying reaction with lithium by the increased reaction area. At the same time. The porous structure of active Sn film plays a part in the buffer and reduces the damage by the volume change during cycles. Since the porous Sn thick film electrode does not require the use of the binder and the conductive carbon black, it has substantially larger energy density. As the concentration of nitric acid in etching solution increased, the degree of the etching increased. The etching of the Sn film effectively proceeded with nitric acid of 3 M concentration or more. The porous Sn film could not be recovered because the most of Sn was eluted within 60 seconds by the rapid etching rate in the 5 M nitric acid. In the case of etching with 4 M nitric acid for 60 seconds, the appropriate porous Sn film was formed with 48.9% of weight loss and 40.3% of thickness change during chemical acid etching process. As the degree of etching of Sn film increased, the electrochemical activity and the reversible capacity for the lithium storage of the Sn film electrode were increased. The highest reversible specific capacity of 650 mAh/g was achieved at the etching condition with 4 M nitric acid. The porous Sn film electrode showed better cycle performance than the conventional electrode using a Sn powder.

Recurrent parent genome (RPG) recovery analysis in a marker-assisted backcross breeding based on the genotyping-by-sequencing in tomato (Solanum lycopersicum L.) (토마토 MABC 육종에서 GBS(genotyping-by-sequencing)에 의한 RPG(recurrent parent genome) 회복률 분석)

  • Kim, Jong Hee;Jung, Yu Jin;Seo, Hoon Kyo;Kim, Myong-Kwon;Nou, Ill-Sup;Kang, Kwon Kyoo
    • Journal of Plant Biotechnology
    • /
    • v.46 no.3
    • /
    • pp.165-171
    • /
    • 2019
  • Marker-assisted backcrossing (MABC) is useful for selecting an offspring with a highly recovered genetic background for a recurrent parent at early generation to various crops. Moreover, marker-assisted backcrossing (MABC) along with marker-assisted selection (MAS) contributes immensely to overcome the main limitation of the conventional breeding and it accelerates recurrent parent genome (RPG) recovery. In this study, we were employed to incorporate rin gene(s) from the donor parent T13-1084, into the genetic background of HK13-1151, a popular high-yielding tomato elite inbred line that is a pink color fruit, in order to develop a rin HK13-1084 improved line. The recurrent parent genome recovery was analyzed in early generations of backcrossing using SNP markers obtained from genotyping-by-sequencing analysis. From the $BC_1F_1$ and $BC_2F_1$ plants, 3,086 and 4868 polymorphic SNP markers were obtained via GBS analysis, respectively. These markers were present in all twelve chromosomes. The background analysis revealed that the extent of RPG recovery ranged from 56.7% to 84.5% and from 87.8% to 97.8% in $BC_1F_1$ and $BC_2F_1$ generations, respectively. In this study, No 5-1 with 97.8% RPG recovery rate among $BC_2F_1$ plants was similar to HK13-1151 strain in the fruit shape. Therefore, the selected plants were fixed in $BC_2F_2$ generation through selfing. MAS allowed identification of the plants that are more similar to the recurrent parent for the loci evaluated in the backcross generations. MABC can greatly reduce breeding time as compared to the conventional backcross breeding. For instance, MABC approach greatly shortened breeding time in tomato.

Coarse Woody Debris (CWD) Respiration Rates of Larix kaempferi and Pinus rigida: Effects of Decay Class and Physicochemical Properties of CWD (일본잎갈나무와 리기다소나무 고사목의 호흡속도: 고사목의 부후등급과 이화학적 특성의 영향)

  • Lee, Minkyu;Kwon, Boram;Kim, Sung-geun;Yoon, Tae Kyung;Son, Yowhan;Yi, Myong Jong
    • Journal of Korean Society of Forest Science
    • /
    • v.108 no.1
    • /
    • pp.40-49
    • /
    • 2019
  • Coarse woody debris (CWD), which is a component of the forest ecosystem, plays a major role in forest energy flow and nutrient cycling. In particular, CWD isolates carbon for a long time and is important in terms of slowing the rate of carbon released from the forest to the atmosphere. Therefore, this study measured the physiochemical characteristics and respiration rate ($R_{CWD}$) of CWD for Larix kaempferi and Pinus rigida in temperate forests in central Korea. In summer 2018, CWD samples from decay class (DC) I to IV were collected in the 14 forest stands. $R_{CWD}$ and physiochemical characteristics were measured using a closed chamber with a portable carbon dioxide sensor in the laboratory. In both species, as CWD decomposition progressed, the density ($D_{CWD}$) of the CWD decreased while the water content ($WC_{CWD}$) increased. Furthermore, the carbon concentrations did not significantly differ by DC, whereas the nitrogen concentration significantly increased and the C/N ratio decreased. The respiration rate of L. kaempferi CWD increased significantly up to DC IV, but for P. rigida it increased to DC II and then unchanged for DC II-IV. Accordingly, except for carbon concentration, all the measured characteristics showed a significant correlation with $R_{CWD}$. Multiple linear regression showed that $WC_{CWD}$ was the most influential factor on $R_{CWD}$. $WC_{CWD}$ affects $R_{CWD}$ by increasing microbial activity and is closely related to complex environmental factors such as temperature and light conditions. Therefore, it is necessary to study their correlation and estimate the time-series pattern of CWD moisture.