• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.310-315
• /
• 2002

겨울철 저온기에 온실의 작물재배는 많은 에너지가 소요되어 저온기의 에너지비용을 최소화하는 것이 온실의 운전비용의 절감과 이용효율이 증대되어 농가소득을 높일 수 있다. 저온기에는 작물의 수확량이 적정 온도조건의 80%수준으로 최소 에너지 투입방법 기술을 개발하여 수확량을 증대시킬 필요가 있다. 기존의 난방방법인 온수보일러는 온도유지 안정성은 좋으나 시설비용이 많이 들고 온풍난방은 설치비용은 저렴하나 온도 유지안정성이 다소 떨어지는 단점이 있다. (중략)

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.10a
• /
• pp.129-129
• /
• 2017

• Journal of Energy Engineering
• /
• v.2 no.2
• /
• pp.154-170
• /
• 1993

복합발전사이클은 서로 다른 온도조건에서 운전되는 두 개의 사이클을 열역학적으로 결합한 발전사이클로서 Fig. 1-(d) 처럼 고온부 사이클에서 배출되는 열량을 저온부 사이클에서 회수하여 전체 시스템효율을 개선하도록 설계되었다$^{1)}$ . 고온부에서 작동하는 사이클을 상부사이클(topping cycle or topper)이라고하며 저온부에서 작동하는 사이클을 하부사이클(bottoming cycle or bottomer)이라고 한다.

• Korean Journal of Food Science and Technology
• /
• v.3 no.1
• /
• pp.44-47
• /
• 1971

(1) Suppression of the seed browning was observed when 3% $CO_2$ conditions were given to a small-type sweet pepper Zairaisisi stored at various CA conditions of a low temperature. (2) When changes in the total polyphenol content for low temperature storage were determined, the highest peak of polyphenol level appeared later than the control which conceded well with the change of seed out-looks. (3) The seed browning effect of enzyme solution for polyphenol extracts of pepper seeds stored at a low temperature with various CA conditions showed a parallelism to the change in polyphenol oxidase activity. (4) There was no striking influence of various CA conditions on maintaining consistent peroxidase activity of pepper seeds.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.202-207
• /
• 2000

This study was conducted to investigate the characteristics of seed germination pattern by the prechilling and alternating temperature treatments to 16 species of native plant. The seed length, width and thickness ranged from 1.1 to 8.9 mm, from 0.7 to 7.5 mm and from 0.4 to 1.7 mm, respectively. In addition, the 1,000 grain weight of native plants ranged from 0.1 to 8.8g. Germination rate of Melandryum firmum R. and Saussurea pulchella F. with light condition, Capsella bursa-pastoris L. and Leonurus sibiricus L. with dark conditionin of non-treatment were the highest 69, 81,16 and 36%, respectively. Germination rate of Aster scaber T., Cirsium setidens N., Ligularia fischeri T., Plantago asiatica L., and Saussurea sp. of 5$^{\circ}C$ prechilling for 30 days were the highest 84, 29, 29, 57, 78 and 95% with light condition respectively, 30% but Cirsium nipponicum M. only with dark condition. Germination rate of Aralia elata S., Aster koraiensis N. and Synurus deltoides N. of alternating temperature with 8 hours at 3$0^{\circ}C$ and 16 hours at 15$^{\circ}C$ were the highest 2 and 57% with light condition and 52% with dark condition.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2003

This study was carried out to extend a marketing shelf-life of the Jeju greenhouse mandarin fruits. Total soluble solids were not showed any significant differences by the temperatures and pre-treatments during the marketing period. Acid content and firmness of the fruits were gradually decreased, which were better in cold than in room temperature treatment. The fruits washed in electrolyzed acid water(pH 2.4∼2.7) maintained freshness higher than those of control Internal CO$_2$concentration of those was 1.0 ％ more or less in the beginning marketing stage, but increased along the marketing period in mom temperature. Especially Internal CO$_2$concentration of wax-coated fruits rapidly increased more than any other, whereas it was a little decreased in cold treatment. After 10 days in room temperature, decay ratio of the fruits was below 4.0% in electrolyzed acid water washing, compared to 10.4% in control. After 30 days in cold temperature, decay ratio was only 3.7% in electrolyzed acid water washing compared to 4.4% of wax-coated treatment and 7.4% of control. The weight loss among the pre-treatments in room temperature had no significant differences and was higher than in cold one.

• Composites Research
• /
• v.35 no.3
• /
• pp.147-152
• /
• 2022

Low-temperature characteristics according to internal temperature conditions during rotational molding of Type 4 pressure vessel liners were studied in this paper. Since rotational molding has a sensitive effect on the formability of the liner depending on the temperature conditions, the temperature conditions for the polyamide used should be accurately set. The structural changes of polyamide as the liner material was analyzed the surface by atomic force microscope (AFM), and the crystallinity measured with a differential scanning calorimeter (DSC) is used to evaluate the change of the mechanical strength value at low temperature. In addition, the formability of the liner was confirmed by observation of the yellow index inside the liner. As a result, as the melting range of the internal temperature becomes wider, the yellow index shows a lower value, and the elongation and impact characteristics at low temperatures are improved. It was also confirmed that the structure of the polyamide was uniform and the crystallinity was high by AFM and DSC. These experimental results contribute to the improvement of characteristics at low temperatures due to changes in temperature conditions during rotational molding.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.105-113
• /
• 2021

This paper delineates the applied thermal environmental test profiles using test conditions and procedures based on MIL-STD-810 Method 501 (High Temperature Test Method) and Method 502 (Low Temperature Test Method). The test profiles have been optimized in order to comply with export customer's requirements and product reliability in high and low temperature environment for XKT-1 (KT-1 Export Version) aircraft. Additionally, the tests are suitable for large sized environmental chambers, which is one of the facilities of ADD (Agency for Defense Development) according to ETEMP (Environmental Test and Evaluation Master Plan). The results of these test profiles and test executions satisfy the customer requirements and product reliability. The present paper can be applied to the other export programs with more severe temperature conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.2
• /
• pp.152-156
• /
• 1984

Germination and emergence of 16 barley cultivars bred in Korea were studied under different low temperature conditions in laboratory at Suweon. This study revealed that the barley cultivars differed markedly in their germination rate index (GRI), emergence rate index (ERI), and dry matter weight. The seeds of Baekdong, Namhaebori, Gangbori and Buheung germinated better than others in $4^{\circ}C$ plot. Yeongsanbori, Kwangseong and Baekdong had very poor ERI values, but Buhobori, Namhaebori, Oweolbori, Albori and malting barley, Sacheon 6 had very good ERI values. Germination rate index were not correlated with emergence rate index under any temperature conditions. The correlation coefficient between ERI of $4^{\circ}C$ and $7^{\circ}C$ plots was very high. Those results showed that for screening the varieties or lines with good emergence capacity under low temperature conditions ERI, FS and dry matter weight would be available.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.15-20
• /
• 2017

Currently, residential air conditioners operate as a heat pump during winter. In this case, the outdoor heat exchanger acts as an evaporator obtaining heat from cold air. On the other hand, it acts as a condenser during summer transferring heat to hot air. The outdoor temperature changes significantly from high to low. Generally, the air-side j and f factors are obtained at a standard outdoor temperature. Therefore, the applicability of the j and f factors under different outdoor conditions needs to be checked. In this study, tests were conducted for a two-row louver finned heat exchanger changing the outdoor temperature to subzero. The effects of the tube-side brine flow rate were also checked. The results showed that air-side j and f factors were essentially constant and independent of the outdoor temperature, suggesting that an extension of j and f factors obtained under standard conditions to a low outdoor temperature is acceptable. All j and f factors agreed within 9% and 3%, respectively. Tests were also conducted by changing the coolant flow rate. Both the j and f factors did not change according to the flow rate, suggesting that the tube-side heat transfer correlation is acceptable.