• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2018

This study examined the effect of binder-to-soil ratio(B/S) and water-to-binder ratio(W/B) on the flow and compressive strength development of soil concrete using high-volume supplementary cementitious materials. As a partial replacement of ordinary portland cement, 10% by-pass dust, 40% ground granulated blast-furnace slag, and 25% circulating fluidized bed combustion fly ash were determined in the preliminary tests. Using the low-cement binder incorporated with clay soil or sandy soil, a total of 18 soil concrete mixtures was prepared. The flow of the soil concrete tended to increase with the increase in W/B and B/S, regardless of the type of soils. The compressive strength was commonly higher in sandy soil concrete than in clay soil concrete with the same mixture condition. Considering the high-workability and compressive strength development, it could be recommended for low-cement soil concrete to be mixed under the following condition: B/S of 0.35 and W/B of 175%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.195-196
• /
• 2012

In this study, it was investigated early age strength generation of low cement concrete with type and addition ratio of hydration accelerator obtaining fundamental data for the application in construction field.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.46-47
• /
• 2013

In this research, it is investigated strength development by replacement ratio of mineral admixture contents, types of superplastisizer and strength improvement material contents based on industrial byproduct to expand use of low cement concrete for typical floor.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.677-680
• /
• 2008

The surface of particles was energetically modified by inter-grinding OPC and BFS in vibration mill for improvement of the early strength and low-heat evolution of concretes. BFS was pre-grinding in ball-mill to 2535(BS2) and 3245 $cm^2/g$(BS3), in blaine surface area. The inter-grinding time in vibration mill was changed from 10 minutes to 30 minutes. And Mixing ration of BFS to OPC was changed in 60, 70, 80%. After inter-grinding, the change of specific surface area, particle size distribution, hydration heat of cement and compressive strength of mortar were measured. As the result of comparison test with LHC, it was found that the mixture and inter-grinding time satisfying the value of over 100% of compressive strength for 7 days and under 170J/g of heat of hydration for 72 hours. and it was confirmed that the possibility of low heat slag cement utilizing blast furnace slag(BS2, BS3) with the low fineness in high volumes.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.74-81
• /
• 1998

• Magazine of the Korea Concrete Institute
• /
• v.9 no.3
• /
• pp.48-56
• /
• 1997

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.343-344
• /
• 2009

Compressive strength and chloride ions permeability measurements of ternary blended cement concretes incorporating ground granulated blast-furnace slag and fly ash were performed From a result of this study, it was found that there may be not a linear relationship between compressive strength and durability of ternary blended cement concretes.

• 레미콘
• /
• no.4 s.71
• /
• pp.18-27
• /
• 2002

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.215-216
• /
• 2009

Recently, the application of SCC (Self Consolidation Concrete) gets more necessity, in order to solve the problem of quality control, noise, etc. In this study describe the optimum mix proportion and the experience of cast in place of the SCC in main structure of underground RC box.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.35-43
• /
• 2022

The aim of this work was to a comparative review the performance of high calcium silicate cement (HSCSC) and that of ordinary Portland cement(OPC) and blast furnace slag cement(S/C). The result of the compressive test confirmed that the compressive strength development rate of high calcium silicate cement concrete at the age of 3 days was 73.6% that of ordinary Portland cement concrete. However, at the age of 28 days, the strength development rate of high calcium silicate cement increased to about 107.0% compared to ordinary Portland cement. In addition, the test of the chloride ion penetration resistance of concrete showed that at the age of 28 days, the passed charge decreased by 73.4% and 93.0%, respectively, in blast furnace slag cement and high calcium silicate cement compared to ordinary Portland cement, and at the age of 56 days, it decreased by 79.1% and 98.3%, exhibiting excellent resistance to chloride ion penetration. In particular, it was confirmed that the rate of decrease in the passed charge with age was higher in high calcium silicate cement than in ordinary Portland cement and blast furnace slag cement.