• Title/Summary/Keyword: 저손실

Search Result 763, Processing Time 0.025 seconds

Audio Quality Enhancement using Perceptual Property at a Low-bitrate Compression (지각적 특성을 이용한 저 비트오율 압축 오디오 음질개선)

  • Cha Hyuk-Geun;Chae Byoung-Koog;Cha Hyung-Tai
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.275-278
    • /
    • 2004
  • 본 논문에서는 저 비트오율 압축 시 발생되는 신호 왜곡을 인간의 지각적 특성을 이용하여 음질을 개선하는 알고리즘을 제안한다. 저 비트오율 압축 과정에서 손실된 고주파 영역의 신호를 부가 정보를 사용하지 않고 손실되지 않은 영역의 정보를 사용하여 고주파 영역의 신호를 첨가함으로써 음질을 개선하였다. 비 손실 영역의 순음 및 비 순음 성분을 검출하여 손실영역에 해당 하모닉 성분을 청각 자극 에너지로 스케일 하여 새로운 신호를 첨가한다. 원 신호와 저 비트오율 압축으로 인해 왜곡된 신호, 그리고 본 논문의 알고리즘을 이용하여 개선된 신호를 신호 대 잡음 비를 측정하고 청감 테스트를 통해 음질 개선 효과를 확인하였다.

  • PDF

An analog circuited bypass current sensing method for average current control (아날로그 회로로 구현가능한 평균전류제어 저손실 Bypass센싱 방법)

  • Kim, Seok-Hee;Lee, Hwa-Seok;Park, Joung-Hu
    • Proceedings of the KIPE Conference
    • /
    • 2013.07a
    • /
    • pp.254-255
    • /
    • 2013
  • 본 논문에서는 저항센서와 바이패스 스위치를 이용한 평균 전류 모드 제어의 부스트 컨버터 저손실을 측정하는 방법을 제안한다. 일반적으로 저항을 이용한 전류센싱 방법은 손실을 가지며 이는 전체 시스템의 효율을 감소시키게 된다. 제안된 전류 측정 기법은 저항센서에 병렬로 바이패스 스위치를 적용하여 전류센서에서 발생되는 손실을 바이패스 스위치를 통해 손실을 최소화 할 수 있다. 본 논문에서는 50W급 평균 전류 모드 부스트 컨버터를 제작하여 바이패스 스위치를 통한 효율 개선을 아날로그 회로로 구현하여 검증하였다.

  • PDF

Design of the T-SRR and Low Loss Band-pass Filter Using MNG Metamaterial (MNG 메타 인공 물질을 이용한 T-SRR 및 저손실 대역통과 필터의 설계)

  • Yoon, Ki-Cheol;Kim, Seong-Cheol
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.11
    • /
    • pp.2512-2520
    • /
    • 2013
  • In this paper, the T-SRR (Triple Split Ring Resonator) using MNG (mu-Negative) meta-material adapted in a low-loss bandpass filter with 3-stages is suggested. The size of the T-SRR in the proposed bandpass filter with low dielectric constant PCB can be easily controlled. And the ${\lambda}/4$ transmission line theory is applied. The proposed T-SRR and filter have the center frequency of 10 GHz with QL value of 184 for military-satellite communication system in I band. The experimental results of the filter show that the insertion and return losses are 1.44 dB and 17.3 dB with bandwidth of 10 %, respectively. The proposed filter will be redesigned by IPD material etc. should be placed here. These instructions give you guidelines for preparing papers for JICCE.

A Power-Aware Transmission Mechanism based on the Retransmission and Congestion Control in Wireless Networks (무선 환경에서 재전송 및 혼잡 제어에 기반한 저전력 전송 기법)

  • 김태현;차호정
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.04a
    • /
    • pp.526-528
    • /
    • 2004
  • 본 논문은 유무선 환경에서 TCP를 이용한 데이터 전송 시 에이젼트를 이용하여 패킷 손실의 원인을 분석, 무선 링크에서 발생한 패킷 손실에 대해서는 혼잡 윈도우 크기를 유지하고, 유선 링크에서 발생한 패킷 손실에 대해서는 지역 재전송을 수행하는 저 전력 전송기법을 제안한다. 제안하는 저 전력 전송기법은 전송 후 WNIC를 저 전력 모드로 전환시킴으로써 WNIC 전력소비를 최소화한다. NS2 시뮬레이션 결과 기존 TCP 보다 무선 링크에서 에러 발생시 67~177(%) 성능향상과 22~44(%) 에너지 감소효과를 보였고, 유선 링크에서 에러 발생시 3~22(%)의 성능 향상과 2~13(%) 에너지 감소 효과를 나타냈다.

  • PDF

A Low Loss and Short-wavelength Transmission Line Employing Inverted Periodically Arrayed Capacitive Devices and Its Application to Miniaturized Passive Components on MMIC (저손실·단파장 특성을 가지는 반전된 형태의 주기적 용량성 선로구조와 MMIC상의 초소형 수동소자 개발에의 응용)

  • Yun, Young
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.36 no.1
    • /
    • pp.149-156
    • /
    • 2012
  • In this study, we propose a novel transmission line employing inverted PACD (Periodically Arrayed Capacitive Devices) for application to a development of miniaturized passive components on MMIC. The novel microstrip line employing Inverted PACD structure showed a loss much lower than conventional microstrip line. Using the inverted PACD structure, we fabricated a miniaturized impedance transformer on MMIC. the size of the impedance transformer was 0.012 $mm^2$, which is only 1.7% of conventional one. The impedance transformer showed good RF performances in a frequency range of 2.25~6.5 GHz.

A Reliable Low-Loss Field-Installable Optical Connector Design by Splicing Angle Adjustment (접속 각도 조정을 통한 신뢰성 있는 저 손실 현장조립 광커넥터 설계)

  • Park, Byung-Chul;Rim, Chong-Suck;Jung, Jun-Ho
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.48 no.9
    • /
    • pp.6-12
    • /
    • 2011
  • In this paper, we propose a design method for a reliable and improved field-installable optical connectors(FIOC) which are needed for long-distance and low loss FTTH configuration. To this end, we optimize the angle of splicing between the inner fiber and the field fiber of the FIOC, so that the low loss connection of optical fibers is possible without using any angle alignment tools as well as angled cleavers. More precisely, we set the cutting angle of the inner filber and the field fiber to be $2^{\circ}$ by using an angled cleaver and $0^{\circ}{\sim}1^{\circ}$ by using a general fiber cutter, respectively. Splicing these two optical fibers without any further adjustment, we can keep the insertion loss within 0.3dB and the reflection loss within -60dB.

Novel Design in Y-branch using Low-Loss Mode Adapter (저손실 광모드 변환기를 장착한 Y-형 분배기 최적 설계법)

  • 송준호;박순룡;오범환;이승걸;박세근;이일항;최영호
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.07a
    • /
    • pp.210-211
    • /
    • 2003
  • Y-형 분배기(Y-branch) 소자는 광 집적 회로(Optical Integrated Circuit)에 있어서 중요한 요소이다. 두 부분의 출력 분기 영역에 대하여 입사광을 균일하게 나눠주는 특징을 갖고 있으며 광 스위치, Mach-Zehnder 간섭기 등에 많이 응용되고 있다. 그러나 분기 부분에서 구조적인 영향으로 손실이 발생하며, 또한 미세한 분기 부분을 제작함에 있어서 공정상의 어려움으로 인해 손실이 발생하는 경우도 있다. (중략)

  • PDF

Dynamic Retransmission Scheme Using Retry Count in Constrained Application Protocol (CoAP) (CoAP 프로토콜에서 재전송 카운트를 이용한 능동적 전송 기법)

  • Lee, Jung June;Kim, Kyung Tae;Youn, Hee Yong
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2015.01a
    • /
    • pp.243-246
    • /
    • 2015
  • 최근 사물 인터넷(Internet of things) 의 발달에 따라, 스마트 디바이스 간의 네트워크 및 이를 구축할 수 있는 기술에 대한 수요가 급증하고 있다. 이러한 스마트 디바이스 간의 저 전력 저 손실 네트워크(Low power and Lossy network) 환경에서 쓰이는 대표적인 프로토콜로 CoAP(Constrained Application Protocol)가 있으며, 해당 프로토콜은 다양한 네트워크 환경에 유연하게 적용할 수 있도록 패킷 재전송 주기 설정 옵션을 가진다. 하지만 하나의 디바이스에서 네트워크 환경이 패킷 손실 및 지연여부를 구분 할 수 없기 때문에, 네트워크 상태 파악을 위해서는 수신과 응답 양측 디바이스의 패킷 흐름을 확인해야 하는 문제점이 있다. 본 논문에서는 프로토콜의 정보를 기반으로 네트워크 상태를 파악 할 수 있는 새로운 필드 값을 적용하여 CoAP 패킷 재전송 주기를 네트워크 환경의 상태에 따라 동적으로 설정해주는 알고리즘을 제안한다. 제안된 기법은 동적으로 재전송 주기를 설정함으로써, 패킷 손실에 의한 서비스 장애 극복 및 패킷 지연 상황에서의 불필요한 패킷 재전송을 방지하여 에너지 효율성을 향상시키고 서비스 안정성을 보장한다.

  • PDF

Effects of $Ta_2O_5$ Addition and Sintering Condition on the Power Loss of Mn-Zn Feerrites (소결조건에 $Ta_2O_5$ 첨가된 Mn-Zn 페라이트의 전력손실에 미치는 영향)

  • Hwang, Jin-Hyeon;Han, Seung-Gi;Han, Yeong-Ho
    • Korean Journal of Materials Research
    • /
    • v.6 no.1
    • /
    • pp.40-48
    • /
    • 1996
  • 고주파 저손실 재질로 사용되고 있는 Mn-Zn 페라이트의 제조공정 중 소결조건과 Ta2O5첨가가 Mn-Zn 페라이트의전력손실에 미치는 영향에 대해서 연구하였다. 등조성선을 따라 냉각하기 위하여 컴퓨터를 사용해서 정확하게 산소분압을 조절하였으며 적절한 등조성선을 선택함으로써 보다 좋은 손실특성을 얻을 수 있었다. CaO-SiO2 첨가계에 Ta2O5를 0ppm에서 400ppm으로 변화시켜 가며 첨가하였으며, Ta2O5 가 400ppm 첨가되었을 경우 균일한 grain 성장과 더불어 낮은 전력손실을 나타내었다. 온도에 상응하는 상평형 산소분압을 정확히 맞춰 냉각할 경우 전력손실 최소값이 질소 분위기에서 냉각시킨 시편보다 높은 온도쪽으로 이동됨도 확인할 수 있었다.

  • PDF