• Composites Research
• /
• v.23 no.4
• /
• pp.1-6
• /
• 2010

The dynamicresponse of biomimetic composites mimicking nacre under low velocity impact is investigated. The composites have hierarchical structures with a staggered pattern consisting of a protein and a mineral. To analyze the impact response of the composites, the finite element method is used. The effects of the hierarchical structures of the compositeson the dynamic response are examined. It is shown that the maximum stress, displacement and contact force in the composite subjected to low velocity impact decrease as the level of structural hierarchy increases.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.412-413
• /
• 2018

고성능 트레드밀 시스템은 운동부하에 따른 큰 맥동부하 특성을 가지며 저속에서도 안정적인 제어 성능이 요구된다. 본 논문에서는 기존에 연구된 유도전동기 센서리스 제어 알고리즘을 검토하여 저속에서 부하의 변화에 강인한 특성을 갖는 알고리즘에 대하여 논하고 이를 트레드밀 시스템에 적용한 결과에 대하여 기술한다. 슬립제어기반의 속도제어기를 구성하였으며 벡터제어기반의 슬립연산 알고리즘을 도입하여 90rpm의 저속에서도 부하변동에 강인하고 안정적인 속도제어가 가능한 트레드밀 제어시스템을 구축하였다. 연구결과는 PSIM 시뮬레이션을 통하여 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.112-113
• /
• 2013

본 논문에서는 부트스트랩 게이트 드라이브 회로가 적용된 3-레벨 NPC 인버터의 전동기 저속 운전에 적용하기 위한 PWM 스위칭 전략을 제안한다. 3-레벨 NPC 인버터를 이용하여 전동기를 제어할 경우, 일반적으로 구현의 편리성 때문에 CBPWM이 주로 사용된다. CBPWM 중 Unipolar 방법이 주로 사용되지만 부트스트랩 회로를 적용한 3-레벨 NPC 인버터의 전동기 저속 운전 시 부트스트랩 캐패시터 방전에 의한 전압 감소 크기가 증가한다. 캐패시터 전압이 정상적인 인버터 동작을 위한 한계 전압 이하로 감소하면 정상적인 제어는 불가능하다. 따라서 본 논문에서는 부트스트랩 회로가 적용된 3-레벨 NPC 인버터의 전동기 저속 운전에 적용하기 위한 PWM 스위칭 전략에 대해 제안 하였으며 시뮬레이션을 통하여 그 타당성을 증명하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.757-770
• /
• 1991

본 연구에서는 조속충격을 받는 복합적층판의 거동에 대해 횡전단변형과 대처 짐효과를 동시에 고려하여 선형해석한 결과와의 차이를 비교, 검토하여 저속충격무제 의 해석에 있어서 비선형해석의 중요성을 보이는데 있다.그리고 충격체의 질량과 속도가 충격하중과 판의 거동, 그리고 동적 변형도등에 미치는 영향을 파악하여 복합 적층판의 외부 물체에 의한 저속충격문제를 이해 하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2021-2023
• /
• 2001

Switched Reluctance Motor(SRM) Drive 회로의 경제성과 효율성을 감안하여 본 논문에서는 범용적으로 많이 쓰이는 비대칭 컨버터와 변형된 C-dump 컨버터를 비교 분석하였으며 산업용 저전압 SRM에 각각 적용하였을 때의 특성들을 기술하였다. 고속도 영역과 저속도 영역에서의 Advance angle과 Firing angle 제어를 하였을 때의 토크특성과 전류특성을 비교하였다. 또한, PWM 을 이용하여 토크리플을 감안한 적절한 on-off 각을 제시하여 그에 따른 저속도 영역에서의 특성들을 기술하였다.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.140-145
• /
• 2011

In order to analyze the influence of the noise on a cross-well traveltime tomography to detect a small scale low velocity body in a homogeneous medium, the first arrival travel times were computed one a tunnel model by a finite-difference ray tracing scheme. Three different types and four different intensity levels of white noises were added to the computed first arrival travel times, and velocity tomograms were constructed using an iterative inversion method (SIRT). Tomograms with the noise intensity up to 10% of the maximum traveltime delay in the tunnel model, showed the exact location of the tunnel. However, the velocity shown at the tunnel location was not close to air velocity but only slightly less than the velocity of the background medium. The additive random noise showed significantly less degree of influence on the resulting tomogram than the source- and receiver consistent noise.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.507-524
• /
• 2006

3-D seismic tomographic inversion is applied to investigation on velocity structure in and near Korean Peninsula. Firstly, it is applied to the region in southeastern Korean Peninsula. According to the results low-velocity zone seems to be clearly appeared in the so called Gyeongsang sedimentary basin and high-velocity zone is shown at the section of 7.5 km depth it implies the inclusion of plutonic rocks at the sedimentary basin. At the depth about $20{\sim}30$ km existence of low-velocity zone seems to be related with the development of Yangsan fault system. Secondly it is applied to the region not only in Korean Peninsula but also East Sea using data from both Korean Peninsula and Japan Islands. Accorging to the results, subduction zone starting from eastern part of Japan seems to be extended to the region beneath the East Sea.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1155-1162
• /
• 2012

The purpose of this study is to investigate the effects of the bead shape on the crash performance of an aluminum crash box under a low-velocity impact condition. The initial peak load and impact energy absorption of a crash box with three types of bead shapes-edge concave, surface convex, and surface concave type-were studied through an FE analysis and an experiment. In addition, the effects of the bead shapes on the crash performance of the crash box were verified through a low-velocity-impact test with a front side member assembled with an aluminum crash box. The initial peak load of the surface-concave-type crash box was reduced by the bead, and therefore, deformation of the front side member at initial contact could be prevented. Furthermore, there was no deformation of the front side member after the impact test because the crash box with a surface-concave-type bead absorbed all the impact energy.

• Composites Research
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2006

Prediction of damage caused by low-velocity impact in laminated composite plate is an important problem faced by designers using composites. Not only the inplane stresses but also the interlaminar normal and shear stresses playa role in estimating the damage caused. But it is well known that the conventional approach based on the homogenization has the limit in description of damage. The work reported here is an effort in getting better predictions of dynamic behavior and damage in composite plate using DNS approach. In the DNS model, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. In the view of microscopic mechanics with DNS model, interlaminar stress behaviors in the inside of composite materials are investigated and compared with the results of the homogenized model which has been used in the conventional approach to impact analysis. Also the multiscale model based on DNS concept is developed in order to enhance the effectiveness of impact analysis, and we present the results of multiscale analysis considering micro and macro structures simultaneously.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.77-82
• /
• 2012

To share the lanes with conventional vehicles, traffic operation strategy is needed for NEV (Neighborhood Electric Vehicle). Because NEV cannot accelerate sharply as fast as common car include gasoline, diesel and LPG cars, they may interrupt traffic conditions and make traffic delay. After green lights turn on, all vehicles run through the street including NEV, but NEV have a maximum speed which is 50km/h. It can be an obstacle for following vehicles and will make traffic delay of the intersection. In this reason, we need to organize traffic systems like queue jump with priority traffic signal. To analyze the necessity for NEV road operations, we simulate three scenarios in congested and non-congested conditions. First is that we examine the condition which is mixed NEV and cars on the road, the second one is that we set up lane only NEV can accepted in simulation and last one is making queue jump lane and providing priority signal for NEV. In conclusion, we can conclude that making lane only for NEV is effective to improve travel speed when rate of NEVs is over 20%. Also queue jump lane and priority signal cannot make good effect to intersection delay and average speed.