• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.118-123
• /
• 1989

In this paper, as we have integrated SCF for voice signal processing using CMOS circuit with the low power dissipation and the easy circuit design, it has been presented the simplified CMOS OP AMP design method with ${\pm}$5V pwoer source in order to use together with digital part. After an example about SCF CMOS OP AMP design, it has been performed layout appling channel width and length obtained by design method, and then its characteristics were simulated by SPICE 2G program. Therefoe, this design method will be applied the general CMOS OP AMP design in the electronic circuit.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.222-222
• /
• 2012

최근 반도체 시장의 300 mm/450 mm wafer 급 이상의 첨단공정에서는 진공 펌프의 대용량화 및 에너지 절감을 위한 저소비 전력화 요구와 함께 공정 중 진공 펌프의 성능저하 및 이상 징후 발생 감지 혹은 예지 요구 및 예지 보수 기술이 높아지고 있는 추세이다. 이에 현재 경험에 의존하던 진공 펌프의 predictive and preventative maintenance (PPM) 주기 설정 기술이 매우 필요함을 알 수 있다. 본 연구에서는 지식경제부에서 지원하는 산업원천기술개발사업에 참여기관으로 수행하면서 한국표준과학연구원에서 주관기관으로 진행하는 스마트형 진공 배기 진단 제어 시스템 개발 과제를 통해 (유)우성진공에서 자체 개발하는 저진공 펌프에 적용 예정중인 smart형 PMS에 대해 소개하고자 한다. 진공 환경을 조성하는 핵심장치인 진공 펌프 상태는 진공 공정 환경 조성에 가장 주요한 변수이므로 이에 따른 상태 진단 기술은 진공 공정 제어 정밀도와 공정 신뢰성 확보에 필수적이며, (유)우성진공에서 자체 개발하는 드라이펌프 및 스크류펌프 등 저진공 펌프의 정밀한 실시간 상태진단을 통해 예지 보수 기술 및 신뢰성을 확보하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1665-1666
• /
• 2006

TFT-LCD(Thin Film Transistor Liquid Crystal Display)는 표시장치로서 실용화된 후 많은 상품에 적용중이다. 그러나, LCD는 자체 발광능력이 없으므로 그후면에서 LCD 화면을 밝혀주는 BLU(Backlight Unit)를 필요로 한다. BLU는 내부 광원으로 밝기가 균일한 평면광을 만들어 LCD 화면을 균일하게 면조사하는 역할을 한다. LCD가 적용되는 분야중 Note PC에는 광원으로 CCFL(Cold Cathode Fluorescent Lamp)가 적용되어 왔지만, 최근 고휘도, 박형화, 저소비 전력을 달성하기 위해 CCFL로는 한계가 있어 LED(Light Emitting Diode)를 적용한 BLU를 제작하기 위한 연구가 진행되고 있다. 본 연구에서는 점광원인 LED 적용한 LED에 있어서 요구되는 휘도 균일성을 향상시키기 위해서는 LED광원이 적용된 BLU의 외관 품질 향상을 위한 도광판 입광부 구조 최적화를 광추적 Simulation을 통해 예측하고 향상시킬 수 있는 구조를 제안한다. Simulation결과, 외관품질 개선을 위해 도광판 입광면에 130도의 Serration과 휘도를 향상하기 위해 도광판 밑면에 렌즈 형상의 바 구조를 도출해 적용한 결과 외관품질향상과 휘도향상을 얻었다.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.147-154
• /
• 1992

This paper describes the design of implantable 8-channel telemetering system to get physiological signals. The internal circuits of this system are designed not only to achieve as small size and low power dissipation as possible, but also to enable continuous measurement of physiological signals. Its main functions are to enable continuous measurement of physiological signals and to accomplish on-off power switching of an implantable battery by receiving appropriate command signals from an external circuit. To integrate implantable biotelemetry system, we performed layout of internal system using Lambda based $2{\mu}m$ n-well design rules. This system, used together with appropriate sensors, is expected to be capable of measuring and transmitting such significant parameters as pressure, pH, and temperature.

• Journal of Environmental Impact Assessment
• /
• v.24 no.4
• /
• pp.317-331
• /
• 2015

A major barrier to the spread and vitalization of renewable energy lies in its economic infeasibility. And yet, there is a disparity in estimating the economic feasibility between supply and demand sides. Taking this into account, we calculate an appropriate level of mini-solar panel subsidies provided by the Seoul metropolitan government. More pointedly, this research investigates the receptivity and social equity of the subsidy program based on the analysis of the program's financial feasibility. The results show that the subsidies can have anticipated effects for the heavy electricity consumption group but not for the low electricity consumption group. Specifically, estimated pay-back periods for groups of 401kWh ~ 500kWh (per month) users, 201 kWh ~ 400kWh users and 101kWh ~ 200kWh were approximately 5years, 8 ~ 9 years and 12 years, respectively. This implies that differential scales of the subsidies can better contribute to reducing regressive difference between the groups and meeting the goal of social equity in regards to energy justice.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1544-1551
• /
• 2007

A start-up circuit of the bandgap reference voltage generator of cascode current mirror type with wide operating voltage range and enhanced power-up characteristics is proposed in the paper. It is confirmed by simulation that the newly proposed start-up circuit does not affect the operation of the bandgap reference voltage generatory even though the supply voltage(VDDA) is higher and has more stable power-up characteristic than the conventional start-up circuit. Test chips are designed and fabricated with $0.18{\mu}m$ tripple well CMOS process and their test has been completed. The mean value of measured the reference voltage(Vref) is 738mV and The three sigma value($3{\sigma}$) is 29.88mV.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.91-94
• /
• 2009

RFID is application field is very wide. For example, There is parking administration system, bookkeeper administration system etc. Such application system must do priority Carrier wave choice according to application purpose. If in case of Carrier frequency is low, awareness distance is short and Carrier frequency is high, awareness distance is very long. This uses in case awareness object is fast-moving. And it must be Tag's supply and demand's that is smooth. Even if development of system is completed, if Tag's purchase is difficult, developing item is not need. In this paper, we shows RFID system using EM4095 chip that is using 125KHz by carrier wave. EM4095 is high effectiveness chip of the low-power and circuit is very simple. It is possible to read with being write as that connect 4 lines with MCU. MCU used Atmega128. As result, we explained circuit and control programs for each part, and show Tag's ID reception that use Reader by picture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.352-360
• /
• 2008

Recently Task Group (TG) 4 of the Institute of Electrical and Electronics Engineers (IEEE) 802.15a has been recommended a system with ranging capability in existence of multiple Simultaneous operating piconets (SOPs) as well as low-cost, low-power. According to the ranging service, coherent and non-coherent based ranging schemes using ternary code have been adopted as a standard. However it is hard to estimate an accurate time of arrival (TOA) in case of using direct sequence based TOA estimation method because pulse repetition interval (PRI) offered by TG is more limited than the maximum excess delay (MED) of channel. To mitigate inter pulse interference (IPI) problem, this paper proposes a non-coherent TOA estimation scheme using non-periodic transmission (NPT) pattern. The proposed receiver is based on a non-coherent energy detection considering with motivation of low rate wireless personal area network (LR-WPAN). TOA information is estimated via proper comparison with a prescribed threshold after the sliding correlation and search back window (SBW) process for reducing TOA error. To verify the performance of proposed ranging scheme, two distinct channel models approved by IEEE 802.15.4a TG are considered. According to the simulation results, we could conclude that the proposed scheme have performed better performance than the conventional method on the existence of multiple SOPs.