• Korean Journal of Microbiology
• /
• v.55 no.2
• /
• pp.177-179
• /
• 2019

Pseudomonas kribbensis CHA-19 was isolated from a temperate forest soil (mid latitude) in New Jersey, USA, for its ability to degrade humic acids, a main component of humic substances (HS), and subsequently confirmed to be able to decolorize lignin (a surrogate for HS) and catabolize lignin-derived ferulic and vanillic acids. The draft genome sequence of CHA-19 was analyzed to discover the putative genes for depolymerization of polymeric HS (e.g., dye-decolorizing peroxidases and laccase-like multicopper oxidases) and catabolic degradation of HS-derived small aromatics (e.g., vanillate O-demethylase and biphenyl 2,3-dioxygenase). The genes for degradative activity were used to propose a HS degradation pathway of soil bacteria.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.28-34
• /
• 2001

To analyze chemical compositions of softwood vinegar prepared with continuous carbonized kiln, the chemical compositions were analyzed by GC-MS spectrometry. The results were summarized as follow : 1. The amounts of methylalcohol and acetic acid and of vinegar were 0.12% and 0.8% respectively, and acidity was 0.85 2. Perfume components of vinegar were frufual, 5-meayl-2-furancarboxyaldehyde, 2,3-pentanedione, 2-butanol, 2,3-dihydrofuran, 1-(2-furanyl)-etanone, benzaldehyde, 2-furan carboxyaldehyde and acetic acid. 3 Vinegar prepared from softwood, so that murk amount of guaiacyl compound and phenol derivetives are produced from lignin and extractives was analγzed. 4 The yield of 4-methyl-di-tert-butylphenol was the highest in the nutural and carbonyl and acetic acid in the acid fractions, 3-ethylpentane in the basic fraction, and guaiacol in the phenolic fraction.

• Electrical & Electronic Materials
• /
• v.15 no.12
• /
• pp.3-10
• /
• 2002

유기 전계발광 소자는 발광성 유기화합물을 양극과 음극사이에 형성한 후 전기적으로 여기시켜 그 발광을 이용하는 디스플레이로 1960년도에 처음 전기 적 발광현상이 안트라센 물질에서 처음 보고되었다[1]. 그 후 1987년에 코닥(Kodak)사의 Tang에 의해 적층형 유기 전계발광 소자가 처음 연구되어 소개된 후 실용화를 목표로 활발히 연구되기 시작하였으며[2], 1990년도 들어서는 유기물 재료 중에 전도성 고분자형 재료의 전기적 발광현상이 영국의 케임브리지 대학에서 보고되어 고분자형 유기 전계발광 소자연구가 진행되기 시작하였다[3]. 유기 전계발광 디스플레이는 평판 디스플레이의 한 종류로서 저전압 구동, 박형, 자체발광에 인한 고인식성 및 넓은 시야각, 빠른 응답속도 등의 많은 장점을 갖고 있어 현재 널리 사용되는 액정 디스플레이의 결점을 해결해줄 수 있는 차세대 디스플레이로 최근 들어 매우 높은 관심을 받고 있으며 연구개발 또한 가장n 활발한 분야로 알려져 있다 현재는 저분자형 유기물을 사용하는 저분자 유기 전계발광 소자와 전도성 고분자를 사용하는 고분자 유기 전계발광 소자가 전자발광 디스플레이 연구의 두 분야로 경쟁하면서 연구가 진행되고 있다. 이에 1990년도 후반부터 디스플레이로의 연구가 일본에서부터 활발히 진행되면서 수동형 (Passive Matrix) 구동의 유기 EID가 일본의 Pioneer,한국의 삼성 SDI등에 의해서 상업화되었다. 현재는 카오디오나 핸드폰 등에 이미 채용이 되고 있으며 일반인들이 쉽게 볼 수 있는 디스플레이로 바뀌어가고 있다. 또한 향후 중대형 디스플레이로 상업화하기 위하여 일본의 Sony, Sanyo, Toshiba, 한국의 삼성 SDI 등에서 능동구동 유기 EL (Active Matrix OLED (AM OLED))를 경쟁적으로 개발하고 있다. (그림 1 참조)유기 ELD는 이와 같이 빠른 속도로 발전하고 있으며, 향후 몇 년 내에 우리 주변의 일상적 인 디스플레이로 등장할 것으로 판단된다. 본 보고서에서는 현재 실용화가 급속히 진전되고 있는 유기 전계발광 디스플레이의 소자구조, 발광기구. 소자특성, 각종 재료, 풀컬러화 기술, 구동방법등에 대한 기술개요와 국내외 기술동향에 대하여 소개하고자 한다.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.890-893
• /
• 2012

Gas hydrates are solid crystal structures formed by enclathration of gaseous guest species into 3-dimensional lattice structure of hydrogen-bonded water molecules. These compounds can be potentially used as an energy storage/transportation medium because they can hold a large amount of gas in a small volume of the solid phase. In addition, huge amount of natural gas, buried in seabeds or permafrost region in the form of the solid hydrate, is regarded as a future energy source. In this study, synthesized natural gas, whose composition is 90.0 mol% of methane, 7.0 mol% of ethane, and 3.0 mol% of propane, was used to identify formation behaviors of natural gas hydrates for the purpose of applying the gas hydrate to a storage/transportation medium of natural gas. According to the experimental results obtained by means of the solid-state NMR and high-resolution powder XRD methods, it is found that formed natural gas hydrates have crystal structure of the structure-II hydrate, and that methane occupies both small and large cages, while the others only occupy large ones. In addition, both the NMR spectroscopy and the gas chromatograph showed that there exists preferential occupation among the natural gas components during the hydrate formation. Compositional changes after the hydrate formation revealed that the preferential occupation is in order of propane, ethane, and methane (propane is the most preferential guest species when forming natural gas hydrates).

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.668-673
• /
• 2005

To collect or transfer samples of gaseous pollutants, various types of tubing are used. Hence, to analyze the uncertainties associated with the use of tubings, a series of comparative test were designed and conducted using the RSC standards with different concentration ranges. For the purpose of this study, we prepared tubings made of six different types of material which include: [1] silco-steel (S1), [2] stainless steel (S2), [3] silicone (S3), [4] PTFE Teflon (T1), [5] tygon (T2), and [6] brass (B). The patterns of RSC loss on to tubing walls, when compared on the basis of the least reactive material S1, exhibited that the extent of RSC loss varied dynamically. It was found that Teflon is highly stable. However, other materials tend to exhibit contrasting patterns of loss. S2 and B show significant loss of light RSC $(H_2S\;and\;CH_3SH)$, while S3 and T2 experience notable loss of heavy RSC (DMS and DMDS).

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.244-252
• /
• 2010

The objective of this study is to assess feasibility of simultaneous analysis for trace multi-components odorous and volatile organic compounds using a Triple-bed adsorbent tube with a thermal desorber and GC-MS. Triple-bed adsorbent tube is 3 bed packed Tenax-TA with small amount of Carbopack B and Carbosieve SIII in order of adsorption strength in a tube. The operating conditions of GC-MS was possibly able to and effectively detect high volatile and low molecular weight compounds at the mass range of 20~350 m/z using a below impurity 1ppm of Helium carrier gas, of which quantitatively analyzed by target ion extracts. According to the experiment, $C_1{\sim}C_5$ of 14 components; sulfur containing compounds(2), ketones(2), alcohols(4) and aldehydes(6) were simultaneously analyzed with recoveries of 99%, and good repeatability and linearity. High volatile and low molecular weight compounds such as methyl alcohol and acetaldehyde can be safely quantified with high recovery at a condition of 50mL/min of flow rate, below 2L of adsorption volume, and 45% of relative humidity. Target ion extract can also simultaneously quantify multicomponents with odorous and volatile organic compounds in an occasion of piled up two peaks.

• Journal of Life Science
• /
• v.30 no.12
• /
• pp.1128-1139
• /
• 2020

Over recent years, it has become evident that food and agricultural products are easily contaminated by fungi of Aspergillus, Fusarium, and Penicillium due to rapid climate change, which is not only a global food quality concern but also a serious health concern. Owing to consumers' interest in health, resistance to preservatives such as propionic acid and sorbic acid (which have been used in the past) is increasing, so it is necessary to develop a substitute from natural materials. In this review, the role of lactic acid bacteria as a biological method for controlling the growth and toxin production of fungi was examined. According to recent studies, lactic acid bacteria effectively inhibit the growth of fungi through various metabolites such as organic acids with low molecular weight, reuterin, proteinaceous compounds, hydroxy fatty acids, and phenol compounds. Lactic acid bacteria effectively reduced mycotoxin production by fungi via adsorption of mycotoxin with lactic acid bacteria cell surface components, degradation of fungal mycotoxin, and inhibition of mycotoxin production. Lactic acid bacteria could be regarded as a potential anti-fungal and anti-mycotoxigenic material in the prevention of fungal contamination of food and agricultural products because lactic acid bacteria produce various kinds of potent metabolic compounds with anti-fungal activities.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.218.2-218.2
• /
• 2010

저분자량의 가스와 물이 물리적 결합으로 이루어진 가스 하이드레이트는 상대적으로 많은 양의 가스가 포집될 수 있다는 특성을 이용하여 다양한 분야에서 활발한 연구가 진행되고 있다. 본 연구에서는 매립지에서 발생되는 매립가스를 하이드레이트의 원리를 이용하여 효율적으로 저장 및 수송하기위한 공정에 적용하기위해 필요한 매립지 가스 하이드레이트의 상평형에 대한 특성을 분석하고자한다. 일반적으로 매립지 가스에는 메탄이 약 50%, 이산화탄소가 약 35%, 질소가 약 6% 포함되어 있으며 그 밖에 산소, 수분, 암모니아 황화수소 메르캅탄 등 할로겐 계통을 포함한 탄화수소계화합물 수십여종이 포함되어 있다. 이러한 매립지가스를 하이드레이트화 하기위해서는 매립지가스에 포함된 다양한 성분들이 하이드레이트 형성에 미치는 영향을 알아볼 필요가 있다. 특히 황화수소의 경우 독성이 있으며, 실제 플랜트에서 장비의 부식등 악영향을 미치므로 이와 관련한 기초 연구가 필요하다. 따라서 본 연구에서는 메탄, 이산화탄소, 황화수소가 각각 49.9%, 50.05%, 500ppm의 조성으로 이루어진 혼합가스를 이용하여 하이드레이트 생성 및 해리 시 거동을 측정하고 그 상평형 영역을 기존데이터와 비교분석 하였다. 25bar, 36bar에서 측정한 상평형 데이터는 한국해양대학교 에서 측정한 결과와 마찬가지로 실제 상평형 영역이 CSMHYD 프로그램으로 예측한 것보다 하이드레이트의 안정영역이 약 2bar 정도 높게 형성되는 것을 확인하였으며, $CH_4+CO_2+H_2S$ 혼합가스 하이드레이트의 생성 시 mol consumption은 $CH_4+CO_2$ 혼합가스 하이드레이트와 유사하게 나타났다. 이 결과로 유추하건대, 황화수소의 첨가는 하이드레이트의 형성 압력을 높이지만, 하이드레이트 형성률에는 크게 영향을 미치지 않는다고 할 수 있다.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2003

The multi-layered OELDs(organic electroluminescent devices) were prepared on the patterened ITO (indium tin oxide)/glass substrates by the vacuum thermal evaporation method. The $Alq_3$ (tris-(8-hydroxyquinoline)aluminum) low molecule compound was used as the light emission layer. TPD(triphenyl-diamine) and $\alpha-NPD$ were used as the hole transport layer. CuPc (Copper phthalocyanine) was also used as the hole injection layers. In addition, QD2 (quinacridone2) organic material with $10\AA$ thickness was deposited in the $Alq_3$ emission layer to improve the luminance efficiency. The threshold voltage was about 7V for all devices. The luminance and efficiency of devices was improved by substitution the $\alpha-NPD$ for TPD as the hole as the hole transport layer. The luminance efficiency of the OELD sample with QD2 thin film in the $Alq_3$ emission layer was found to be 1.55 lm/W, which is about 8 times larger value compared to the sample without QD2 thin layer.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.878-888
• /
• 1994

In order to investigate the fracture behavior of ABS terpolymer under the tension and impact load, varing the content of rubber, molecular weight of SAN, content and kinds of lubricant, tension speed, the mechanical properties were measured and SEM pictures of fracture area were taken. Under the tension, the tensile strength increased as rubber content and lubricant content decreased, while molecular weight and tension speed increased. The deformation of area near fracture site did not occur as rubber content, tension speed and molecular weight decreased and liquid lubricant was used. And in the shape of fracture seemed phase seperation. Under the impact load, the notched izod impact strength increased as rubber content, molecular weight, ambient temperature and lubricant content increased. In the SEM picture, the strength was high white the fracture surface was small.