• 제목/요약/키워드: 저마

검색결과 28건 처리시간 0.026초

저마하수 예조건화 기법을 이용한 비행선의 돌풍 응답 해석 (Analysis of Airship Gust Response Using Low Mach Number Preconditioning)

  • 김주성;남화진;권오준;염찬홍
    • 한국항공우주학회지
    • /
    • 제32권5호
    • /
    • pp.30-40
    • /
    • 2004
  • 본 연구에서는 비정렬 격자계에서 비행선 돌풍 해석을 위한 해석 프로그램을 개발하였다. 지배방정식으로는 Euler 방정식이 사용되었으며, 비행선의 저마하수 운행 영역에서의 정확하고 효율적인 해석을 위해 저마하수 예조건화 기법을 적용하였다. 돌풍 모형으로는 sharp-edged gust가 사용되었다. 해석 기법의 검증을 위해서는 선형 방정식에 대해서 유도된 해석해와 비교하였으며, 잘 일치하는 것을 알 수 있었다. 실제적인 비행선 형상에 대해서 돌풍의 영향을 받을 때 양력 계수는 매우 큰 변화를 일으키는 반면에 모멘트는 상대적으로 작은 변화를 일으키는 것을 볼 수 있었다. 또한 제어면의 사용으로 인해 더욱 강하게 정적으로 안정하게 되는 것을 알 수 있었다.

비행선의 동적 감쇠계수 계산 방법에 관한 연구 (A Study of Computation Methods for Dynamic Damping Coefficients of an Airship)

  • 박수형;장병희;김유진;권장혁
    • 한국항공우주학회지
    • /
    • 제31권5호
    • /
    • pp.10-17
    • /
    • 2003
  • 정적으로 불안정한 비행선의 안전성을 확보하기 위해서는 동적 안정성이 필수적으로 요구된다. 본 연구에서는 강제진동 풍동시험을 보완하고 검증하기 위한 수치해석이 수행되었다. 비행선의 저속 유동장 해석을 위해 저마하수 예조건화된 수치기법이 적용되었다. 동적 감쇠계수의 변화를 두 가지 계산방법을 적용해 살펴보았다. 계산결과, 비행선은 각 방향의 모멘트에 대해 동적으로 안정되고, 힘에 대해서는 불안정하게 나타났다. 또한, 감쇠계수는 받음각과 각속도의 크기에 대한 영향보다 회전방향에 대한 영향이 더 큼을 확인하였다.

저마하수 예조건화 기법을 위한 다중격자 DADI 기법 (Multigrid DADI Method For Low Mach Number Preconditioning Method)

  • 성춘호;권장혁;최윤호;이승수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2001년도 추계 학술대회논문집
    • /
    • pp.20-30
    • /
    • 2001
  • A multigrid DADI method for low Mach number preconditioning method is presented. The eigenvalues of governing equations are modified by A low Mach number preconditioner developed by Choi & Merkle, and it results in an accurate solution and fast convergence In the low Mach number region. The convergence of numerical method is further accelerated by multigrid method. The efficient and accuracy of present method is shown by comparison with conventional solution method for the compressible flows.

  • PDF

친환경을 위한 마직물(아마, 저마, 대마)의 쪽 천연염색에 관한 연구 (Eco-friendly, natural dyeing of linen, ramie, and hemp fabrics using Polygonum tinctoria)

  • 김미경
    • 복식문화연구
    • /
    • 제31권2호
    • /
    • pp.161-172
    • /
    • 2023
  • In this study, natural dyeing using Polygonum tinctoria was performed with linen, ramie, and hemp, which are biodegradable cellulose fibers, considering environmental aspects. In particular, the impacts of alkali NaOH and reducing agent Na2S2O4 were examined, and the possibilities of minimizing the use and reusing the dye were explored. The surface dye concentrations were found to be in the following order: hemp>linen>ramie. With the increase in all additives, the L* value decreased, and the ⊿E and K/S values increased gradually. When Na2S2O4 was 1g/L, the surface color of the dye appeared uniformly from the NaOH concentration of 0.4g/L (pH 10.84). When NaOH was 0.4g/L, the K/S values of linen and ramie increased rapidly after 0.4g/L of Na2S2O4, and hemp maintained a stable color from 0.6g/L of Na2S2O4. With the increase in the dye concentration from 1 to 6g/L, all the fibers were dyed uniformly. The K/S value increased or higher doubled upon repeated dyeing six times for 5 min than when dyed only once for 30 min. Therefore, the linen, ramie, and hemp fibers dyed repeatedly exhibited good washing, rubbing, and colorfastness to perspiration, which was rated between 4 and 4-5, and that to light was rated as 5. Moreover, no discoloration due to sunlight was observed. Finally, linen exhibited a bacterial reduction of 99.9%, thereby indicating its excellent antibacterial property.

식물에서 추출한 살충.살균제가 문화재 재질에 미치는 영향 - 견직물, 면직물, 저마직물, 한지, 안료분말, 채색편 - (The Effects of Various Vegatable Pesticides on Materials of Cultural Property - Dyed and Undyed Silk Fabrics, Cotton Fabrics and Korean Papers, Undyed Ramie Fabric, Pigments, Painted Plates -)

  • 오준석
    • 보존과학회지
    • /
    • 제20권
    • /
    • pp.9-22
    • /
    • 2007
  • 문화재의 생물방제를 목적으로 개발되어 시판되고 있는 3종의 식물 추출 천연 살충 살균제에 대한 문화재의 재질에 미치는 영향을 평가하였다. 평가 대상 재질은 1) 견직물 : 염색하지 않은 견직물, 황벽, 오배자, 오배자(명반 후매염), 오배자(녹반 후매염), 치자, 울금, 도토리, 도토리(녹반 후매염), 자초, 천근, 천근(명반 후매염), 홍화(홍염색), 소목, 소목(명반 선매염, 후매염) 염색 및 쪽, 쪽과 황벽 복염, 쪽과 소목 복염 견직물 2) 면직물 : 염색하지 않은 면직물, 황벽, 오배자, 오배자(명반 후매염), 치자, 도토리, 도토리(녹반 후매염), 자초, 천근, 천근(명반 후매염), 홍화(홍염색), 소목, 소목(명반선매염, 후매염) 염색 및 쪽, 쪽과 소목 복염 면직물, 3) 염색하지 않은 저마직물 4) 한지 : 염색하지 않은 한지, 소목, 쪽, 치자, 홍화(홍염색), 황벽 염색 한지 5) 안료분말 :석청 석록, 연단, 석간주, 주사, 주, 패각호분, 밀타승,대자, 석황, 쪽, 백토, 연백 남전 5)채색편 : 석청, 석록, 연단, 석간주, 주사, 주, 패각호분, 밀타승, 대자, 석황, 쪽, 백토, 연백, 남전이다. 시험은 시료를 습도 $55{\pm}1%$. 온도 $20{\pm}2^{\circ}C$의 환경에서 약제의 권장 농도의 10배에 9개월간 노출 시킨 후 기준 시료와의 색차와 인장강도를 비교 평가하였다. 약제 노출 후 염색을 하지 않은 견직물 면직물 저마직물 한지는 약제에 의한 색상 변화는 거의 일어나지 않았으나, 염색 견직물 면직물 한지는 도토리나 천근 염색 직물 등이나 치자 염색 한지를 제외하고는 대부분 일반인도 인식이 가능한 뚜렷한 색상차가 발생하였다. 특히 울금 염색 견직물은 가장 색상차가 뚜렷하였다. 그리고 안료분말이나 채색편은 납, 구리, 비소, 수은 함유 안료 및 식물성 안료 등에서 뚜렷한 색상차가 발생하였다. 인장강도는 염색하지 않은 견직물은 약제에 거의 변화가 없으며 면직물은 약간 감소하는 경향을 보이나, 염색을 한 견직물이나 면직물은 강도의 증가나 감소가 뚜렷하였다. 특히 천근 염색 견직물은 10% 이상의 강도 감소가, 쪽 염색 견직물은 10% 이상의 강도 증가가 일어났으며, 천근과 소목(명반 후매염) 염색 면직물은 10% 이상의 강도 감소 현상이 일어났다.

  • PDF

플래핑 날개의 음향 특성에 대한 수치 연구 (Numerical Investigation on the Flapping Wing Sound)

  • 배영민;문영준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.3209-3214
    • /
    • 2007
  • This study numerically investigates the unsteady flow and acoustic characteristics of a flapping wing using a hydrodynamic/acoustic splitting method. The Reynolds number based on the maximum translation velocity of the wing is Re=8800 and Mach number is M=0.0485. The flow around the flapping wing is predicted by solving the two-dimensional incompressible Navier-Stokes equations (INS) and the acoustic field is calculated by the linearized perturbed compressible equations (LPCE), both solved in moving coordinates. Numerical results show that the hovering sound is largely generated by wing translation (transverse and tangential), which have different dipole sources with different mechanisms. As a distinctive feature of the flapping sound, it is also shown that the dominant frequency varies around the wing.

  • PDF

저마하수 난류 끝단 소음 예측 (PREDICTION OF TURBULENCE TRAILING-EDGE NOISE AT LOW MACH NUMBERS)

  • 장강욱;고성룡;서정희;문영준
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2005년도 추계 학술대회논문집
    • /
    • pp.249-253
    • /
    • 2005
  • The turbulence noise generated from blunt trailing-edge is numerically predicted by using the hydrodynamic/acoustic splitting method at the Reynolds number based on thickness of flat plate, $Re_h=1000$, and the freestream Mach number $M_o=0.2$. The turbulent flow field is simulated by incompressible large-eddy simulation and the acoustic field is predicted efficiently with the linearized perturbed compressible equations (LPCE) recently proposed by the authors. The turbulent flow characteristics are validated with the results of the previous experimental study and direct numerical simulation. The acoustic properties predicted from LPCE are compared with the solutions of analytical formulations.

  • PDF