• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1026-1031
• /
• 2001

In this paper. the dynamic characteristics of a super high-speed tilting-pad air bearing(TPGB) used in a turbo expander with high expansion ratio are analyzed. The dynamic behavior and stability of a rotary system supported by two journal air bearings are investigated numerically. The transient response of the shaft is obtained by simultaneously solving the equation of motion of the shaft and the dynamic Reynolds equation. The stiffness and damping coefficients of the bearing are calculated from the loading coefficients of the bearing are calculated from the loading capacity. shaft velocity and displacement by using a curve fitting method. The natural frequencies of the 1st and 2nd rigid modes can be calculated from these coefficients. The theoretical method of a rigid rotor system is verified by experimentsut.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.2
• /
• pp.79-86
• /
• 2014

This paper describes an integrity evaluation method for emergency diesel generator(EDG) and rotor part of EDG. EDG is a very important equipment in the nuclear power plant(NPP). EDG supplies electricity to the safety-related equipments for the safety shut down of NPP in an emergency situation of earthquake. The safety of the rotor part of EDG is also important during seismic impact from earthquake. The finite element modelling of the EDG including rotor part was constructed. The modal analysis of EDG was firstly performed. The first natural frequency was calculated and revealed higher than the cutoff frequency of seismic spectrum. Then the stress analysis was done to compare with the allowable stress. The safety of the rotor part was investigated by the finite element analysis of the rotor and journal bearing interaction to find film thickness and critical speed. The seismic load was applied to rotor part in a manner that the load was a weighted static load. Analysis results showed that the maximum stress was within the range of allowable stress and the film thickness is larger than the permissible minimum thickness, and the critical speed was out of the operating speed. Hence, the structural and dynamic integrity of EDG could be confirmed by the numerical analysis method used in this paper. However, dynamic analysis of a rotating rotor and supporting bearing with the seismic impact needs to be investigated in a more rigorous method since the seismic load to the rotating part complicates the behavior of rotating system.

• Tribology and Lubricants
• /
• v.2 no.2
• /
• pp.32-43
• /
• 1986

The mobility method is used for optimizing dynamically-loaded journal bearings. Connecting -rod bearings in both diesel and gasoline engines are optimized by parametric studies of bearing span and clearance. The inertia effect of the connecting-rod is also included in this study. Minimum film thickness, maximum film pressure, and friction loss are calculated to satisfy the design conditions in both engines.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.1-9
• /
• 1982

자동차에서 윤활을 필요로 하는 부분으로서는 엔진과, 차체 그리고 변속 및 주형장치로 대별되며 엔진만의 윤활을 위해서는 엔진유가 필요하고 차체나 변속 주형장치는 그리이스 및 기어유가 사용된다. 특히 자동차윤활에서 가장 가혹한 조건으로 윤활되고 또한윤활문제로 고심하는 엔진 윤활은 엔진의 구조나 윤활방식 또는 사용연료등엥 따라 윤활상태가 크게 달라질 수도 있으나 윤활이 기본원리와 목적은 대동소이하다. 자동차엔진, 특히 가솔린엔진에서 윤활을 필요로 하는 부분은 베어링, 실린더 및 캠부분등으로 나눌 수가 있으며 이런 부분의 윤활은 극히 가혹한 상태에 놓이게 된다. 따라서 이와 같은 문제들을 고려하면서 가솔린엔진윤활의 제문제점과 엔 진유에 요구되는 성능에 대하여 고찰하여 보고자 한다.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.10-17
• /
• 1982

이글에서는 1. 마찰손실의 사고방식 2. 마찰손실의 내역과 제인자의 영향 1) 기계마찰에 대한 기관각부의 비율 2) 실린더 내압, 회전속도, 부하의 영향 3)윤활유점도의 영향 4) 행정/안지름비의 영향 5) 베어링축 및 오일클리어런스의 영향 6) 기관치수의 영향 7) 모우터링시와 발화운전시의 마찰손실의 비교 3. 마찰에 의한 경제적 손실 등에 관하여 알아보았다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.241-245
• /
• 1998

The traditional approach is to characterize the behavior and performance of fluid film hydrodynamic journal bearings by means of linearized bearing analysis. The objective of this paper is to examine the nonlinear characteristics of the journal bearing when an external sinusoidal shock is given to the system. The oil film force is obtained by solving the finite width Reynolds equation at each time step by the solution of the column method. Frequency response functions obtained from both linear and nonlinear bearing simulations are compared with each other.

• Journal of the KSME
• /
• v.27 no.2
• /
• pp.109-112
• /
• 1987

산업이 고도화 되면서 기계장비의 중량화와 고속화가 가속되어지고 있으며, 이로 인하여 과다한 진동과 소음을 유발시키고 있다. 특히 교통량이 많은 도로변의 건물 및 주택가에 소음공해가 심하며, 고속도로 및 철도연변의 건물 및 주택가는 비록 차음벽을 설치하여 많은 소음을 차단해 주지만 미흡한 상태다. 또한 철도 진동이 주위 건물 기초로 전파하여 건물의 진동을 유발하여 건물벽체가 갈라짐의 원인이 될 수 있다. 따라서, 교통 소음이 심한 장소에서는 차음율이 높은 재료를 사용하여 공기음을 차단하며, 건물의 유리창은 가능한 한 2겹유리(pair glass)를 사용한다. 또한 철도 연변의 건물기초는 베어링 페드를 사용하여 지반으로 전파되는 진동을 차단하여 줌으로써 안락한 주거환경 및 근무환경을 조성하리라 생각한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.400-403
• /
• 2004

This paper presents an optimum design of journal bearings using a hybrid method to find the solutions of optimization problem. The present hybrid algorithm, namely Enhanced Artificial Life Algorithm(EALA), is a synthesis of an artificial life algorithm(ALA) and the random tabu search(R-tabu) method. EALA is applied to the optimum design of journal bearings supporting simple rotor. The applicability of EALA to optimum design of rotor-bearing system is exemplified through this study.

• Tribology and Lubricants
• /
• v.5 no.1
• /
• pp.69-75
• /
• 1989

The mobility method of dynamically loaded journal bearings was applied to optimize the lubrication of the main journal bearing of the crank press. The effects of oil viscosity, temperature bearing clearance, length, the existence of the circumferential groove, peak press force, and crank rpm were examined. From the results of the minimum film thickness and the maximum film pressure, some of the factors could be optimized, and the degrees of the beneficial and detrimental effects of the others could be estimated.

• Tribology and Lubricants
• /
• v.31 no.1
• /
• pp.1-5
• /
• 2015

In this study, we apply an ultrasonic nanocrystal surface modification (UNSM) technique to radial journal bearings (JBs) and disks made of SUJ2 and SCM440, respectively. We investigate frictional properties of untreated and UNSM-treated specimens using a ball-on-disk tester. We construct the Stribeck curve at the boundary, under mixed and full hydrodynamic lubrication conditions for the specimens using friction data obtained from JB tests. The friction at the boundary lubrication condition and the transition period to mixed lubrication condition on the UNSM-treated specimens is reduced, which improves the service life of JBs. The major effects of this reduction in the three lubrication regimes can be explained in the terms of improved mechanical properties and the presence of micro dimples. Moreover, we estimate the friction and fatigue properties of SCM440 specimens using a ball-on-disk specimen under dry and oil-lubricated conditions. Friction test results reveal that the UNSM-treated specimens show lower friction coefficient than the untreated specimens under both dry and oil-lubricated conditions. We evaluate the fatigue properties of SCM440 specimens by calculating the Hertzian stress with respect to the failure cycles. Fatigue tests results also reveal that the UNSM-treated specimens possess a longer fatigue life than the untreated specimens. The improved properties are effective in increasing the energy efficiency of bearings.