• The monthly packaging world
• /
• s.161
• /
• pp.124-147
• /
• 2006

환경부는 폐기물관리정책의 방향을 종전의 안전처리 및 단순 재활용에서 발생억제와 자원화 확대로 전환하고자 제명을「자원순환사회형성과 재활용촉진에 관한 법률」로 변경했다.법 전반에 걸쳐 자원순환의 개념과 원칙의 반영을 강화하고, 제품 및 개발사업의 자원 순환성 평가∙사업장 폐기물의 감량화∙부품 등의 재사용 촉진∙순환자원을 이용한 에너지회수시설의 설치 및 운영∙폐기물 전처리시설의 설치 및 운영 등을 새로 규정하거나 강화하여 자원순환사회를 조기에 정착하고, 현행제도의 운영과정에서 나타난 일부 미비점을 개선∙보완하기 위해 다음과 같이 법률을 개정했다.본 고에서는 주요 내용을 살펴본다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.69-71
• /
• 1994

섬유폐수는 합성유기물인 염료와 발호공정에서의 호제가 다량으로 함유되어 있어 기존의 생물학적 처리법에 의한 처리가 용이하지 않다. 게다가 섬유산업은 여타산업에 비해 다량의 물을 소비하는 산업이다. 그동안의 산업의 고도 발전에 따라 앞으로는 물부족현상이 심해질 전망이며, 환경보전 및 보호에 대한 의식이 고취됨에 따라 이러한 섬유폐수의 처리도 이제까지와는 다른 새로운 방법으로 그 효율을 극대화할 필요성을 느끼게 되었다. 이에 따라 본 연구에서는 막분리 공정으로서 한외여과, 역삼투 공정을 이용하여 염색$\cdot$제직폐수를 고도처리하여 재활용이 가능토록 하였으며, 이를 바탕으로 염색$\cdot$제직폐수의 고도처리를 통한 재활용 시스템을 설계하였다.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.99-103
• /
• 2005

Nowadays, large amount of waste pottery and porcelain annually are produced. It is needed that they are used as recycled materials in order to prevent environmental pollution and gain economic profits. Therefore, the purpose of this study is to present the method of utilizing the recycled aggregates that are obtained from waste pottery and porcelain as the concrete aggregate. The qualities of the recycled aggregate were compared with those of the crushed aggregate through measuring their physical properties. The test results showed that the replacement of crushed aggregate by recycled aggregate at the levels $10\%,\;20\%$, and $30\%$ had little effect on the compressive strength of the concretes, but higher levels of replacement reduced the compressive strength. Increment of the replacement of recycled aggregate caused increase in absorption ratio. As a conclusion, norman strength recycled aggregate concretes can be produced using less than $30\%$ of recycled aggregate.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.712-715
• /
• 2008

The construction wastes rapidly increase because of redevelopment, the development of new urbanization of large-scale land development, the expansion of social infrastructure. As one of the ways to recycle construction waste to be recycled directly. This case, recycling of materials uses up most of recycled aggregate can be secured reliably. As a result, a decrease in the amount of materials brought in or taken out of the site, the cost of transportation, carbon dioxide emission, and traffic can be reduced. Economic, social and environmental effects can be expected. Therefore, this study of the construction waste "Site-Recycling" to enable the construction waste from the occurrence of "site-recycling" that can be processed in batches to apply the "Site-Recycling Simulation Program" is to develop the algorithms.

• Resources Recycling
• /
• v.24 no.4
• /
• pp.38-49
• /
• 2015

The importance of recycling came to the fore by increasing of waste electrical and electronic equipment(WEEE) generation. Small WEEE recycling in particular represents a big challenge in Korea because it has various items and components. Main materials of small WEEE are typically well known for metals (copper, iron, aluminum, etc.), PCBs and plastics. Not only Korea but also overseas, the laws for small WEEE were in effect in order to recycle effectively, but the technology is not catched up with the regulation which has to recycle an allocated account of WEEE. In addition, recycling technologies and processes for small WEEE are not developed enough to recycling center properly. In that sense, if we develope the recycling process, have not only technology competitiveness but also resource conservation, improving the environment and economic profits. Therefore, through the analysis of economic value of recycled small WEEE, and current technologies both domestically and internationally, we design conceptual recycling process of small WEEE, and consider the way forward.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.1
• /
• pp.19-26
• /
• 2015

The carton for liquid products are divided into 'gable top carton' and 'aseptic carton'. Currently, these packages are being recycled in the toilet tissue manufacturing process. The recycling of the carton aluminium laminate is the most important problem facing the recycling procedure of the carton packages due to the reduction in quality of recycled materials. The polymer structure with synthetic resins being used mainly in beverage packaging is also one of the important factors for the procedure for its recycling. The objective of this study was to investigate the package material and structure of the carton for liquid products through marketing research and suggest the supplementation in the work processes of production, use, and recycling. The results represent to improve the recycling profit and the quality of recycled materials when a laminated aluminium of carton for liquid products is replaced to the transparent polymer film. The improvement of the sorting and recycling process may help their recycling efficiencies. In addition, the limited use of synthetic resin molded packaging and increase of wood-pulp collection rate will provide the improvement of the recycling profit and the quality of recycled materials.

• Composites Research
• /
• v.26 no.5
• /
• pp.303-308
• /
• 2013

Carbon fiber (CF) reinforced polypropylene (PP) compositeis was increased to amount consumed. In this study, recycle of composites by recycle times. CF was containing 20%. Mechanical and interfacial propertis of CF/PP was evaluation for number of recycle time. Mechanical assessment of CF/PP was tension, bending, fatigue tension test and izod test method. Interfacial assessment of CF/PP was wettability test and FE-SEM of fracture surface method. Fiber and matrix was changed to recycle time. The more recycle of CF/PP, the more interfacial bonding was decreased. Because fiber and matrix was damaged to thermal damage. And then reinforced CF was shorter than original shape.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.23-27
• /
• 2004

In this study, experimental work was performed to mold tensile specimens by using the injection molding machine. Melt temperature, mold temperature and the mixed ratio of recycled resin were selected as processing parameters for studying the effect of those conditions on the shrinkage, weight, absorption, and tensile strength of molded parts. As a result, the shrinkage was increased according to the higher mold and melt temperature and it was more sensitive to the change of mold temperature. On the other hand, the weight of molded parts was decreased due to the increment of mold and melt temperature. Tensile strength was increased with mold and melt temperature, and it was also easy to change by mold temperature.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.739-740
• /
• 2023

코로나19 의 여파로 생활 폐기물은 급속도로 늘어나는 반면 재활용 사업장의 여건은 개선되지 않고 있어 재활용 산업의 인력난 해결의 필요성이 떠오르고 있다. 이를 위해 본 논문에서는 딥러닝 모델을 활용하여 재활용 폐기물을 분류하는 방법을 제시한다. 딥러닝 모델은 최신 객체 탐지 모델인 YOLOv5를 사용하고, 객체 탐지 성능을 향상시키기 위해 실제 환경에서 수집된 학습용 데이터를 직접 라벨링하여 사용한다. 실험 결과 종류별 평균 0.69의 mAP50 스코어를 기록하였으며 이를 통해 딥러닝 모델을 활용하여 재활용 폐기물을 효율적으로 분류하는 것이 가능함을 확인하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.117-118
• /
• 2004

국내 TRIGA Mark II&III 및 우라늄 변환시설 해체시 다량의 금속폐기물 발생이 예상되며, 현재 이러한 저준위 방사성 금속폐기물을 처리, 재활용하는 기술들에 대한 연구가 국$\cdot$내외적으로 활발히 수행 중에 있다. 이에 본 연구에서는 해체시 발생하는 금속폐기물의 효율적인 감용 및 재활용에 관한 국내외 처리 기술을 검토하여 국내 TRIGA Mark II&III 및 우라늄 변환시설에서 발생하는 해체 금속폐기물의 처리 방안을 수립하기 위한 정보를 제공하고자 한다.