• Korean Journal of Plant Resources
• /
• v.14 no.2
• /
• pp.102-107
• /
• 2001

This study was carried out to explore for the possibility of recycling the pine wood sawdusts for the substrate for enokitake (Flammulina velutipes) cultivation. The wood species of sawdusts cultivated for enokitake mushroom were identified mostly as hard pine (Pinus spp.). Distribution of enokitake hyphae was restricted to ray parenchymas and tracheids exposed to fungi. Nevertheless, degree of cell wall degradation by enokitake was slight. Light microscopic observation showed the thinning of secondary cell wall in some tracheids. Under polarized microscopy the 1()ss of birefringence was observed only in a few latewood tracheids. All the middle lamella remained intact. The present work showed clearly that pine sawdusts used as substrate for enokitake cultivation held enough cell wall materials for mushroom cultivation. The relative resistance of softwood cell walls against enokitake fungus was also discussed.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.10-20
• /
• 2008

In order to study the behaviors of inorganic fillers in recycling of the waste agricultural plastic films, the washed PE fluffs from Shihwa and Jungeup Plant belonging to ENVICO were used respectively. First of all, the test pellets were manufactured by adding of inorganic fillers suchlike calcium carbonate and calpet by certain portions to PE fluffs and then the tested sheets were formed. The mechanical and thermal properties of the samples were measured and compared with others. The items measured were tensile, flexural, Izod impact, HDT, MFT, and so on. Morphologies were also investigated for various samples using the SEM. Finally, optimum ratios between recycled PE and inorganic additives were found out for the best products in physical condition as well as in economic point of view.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.254-259
• /
• 2009

DC transit system has been adopted in the metropolitan area, Korea since 1974. Electric multiple (EMU) in this system always reiterates that acceleration and retardation. When EMU decelerates using electric breaking, regenerative power occurs. Regenerative power can be consumed in vicinity EMU on the same line or in resistor. If DC transit system has inverter for reusing regenerative power, Energy efficiency in DC transit system and the replacement cycle of brake shoe in EMU will be increased and dust due to mechanical braking decreased. This paper present the developed inverter for regenerative power and its test equipment. Test for developed inverter is performed at test equipment and is divided into three items, which are regeneration mode, active filter mode, and system link test.

• Resources Recycling
• /
• v.15 no.6 s.74
• /
• pp.48-55
• /
• 2006

This study was carried out for establishing the physical recycling technique for commercializing process on household batteries. The procedure involves shape separator, crushing, magnetic separation, classification and eddy current separation in sequence. The separation capacity was 400-600 unit cell/hr with shape separation system. The impurities such as manganese and zinc in the magnetic product were below 0.1% respectively, the concentration of iron was above 99% in spent carbon zinc battery. Also non-magnetic products are composed of 22-30% En, 16-22% Mn, 1-3% Fe in the case oi spent zinc carbon battery. The amounts of other components such as carbon rod, plastics and separator were about 37-50%. From the eddy current separation of nonferrous products, the plate-type zinc components were separated up to 96% with 2,250-2,750 meter/min of the conveyor speed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.21-29
• /
• 2024

In this study, EMC(Epoxy molding compound) waste from the semiconductor molding process is recycled and synthesized into silica nanoparticles, which are then applied as abrasive materials contains CMP(Chemical mechanical polishing) slurry. Specifically, silanol precursor is extracted from EMC waste according to the ultra-sonication method, which provides heat and energy, using ammonia solution as an etchant. By employing as-extracted silanol via a facile sol-gel process, uniform silica nanoparticles(e-SiO₂, experimentally synthesized SiO₂) with a size of ca. 100nm are successfully synthesized. Through physical and chemical analysis, it was confirmed that e-SiO₂ has similar properties compared to commercially available SiO₂(c-SiO₂, commercially SiO₂). For practical CMP applications, CMP slurry is prepared using e-SiO₂ as an abrasive and tested by polishing a semiconductor chip. As a result, the scratches that are roughly on the surface of the chip are successfully removed and turned into a smooth surface. Hence, the results present a recycling method of EMC waste into silica nanoparticles and the application to high-quality CMP slurry for the polishing process in semiconductor packaging.

• 기계와재료
• /
• v.24 no.1
• /
• pp.82-91
• /
• 2012

이제 더 이상 지구 온난화는 나만 혹은 우리를 제외한 남의 일이 아닌 것이다. 거의 매일 우리는 지구 온난화로 인한 난처한 현상들을 보고 듣거나 직접 느끼고 있는 중이다. 지구 온난화의 주 원인인 이산화탄소 가스의 배출은 비록 다양한 배출 요인들로부터 비롯되고 있다지만 무엇보다도 과다한 생산 제조 활동 때문이라는 것을 모르는 사람은 거의 없을 것이다. 과다한 생산 제조 활동의 증가 추세가 둔화되지 않는 것을 지속적인 신규 생산 제조 활동으로부터 비롯되는 것이라 생각할 수 있다. 이를 막을 수 있는 방안은 말이 쉽긴 하나 재활용 더 나아가 재사용하는 길 뿐이다. 사실상 재활용 역시 상대적으로나 적은 범위의 국한된 생산 제조 활동일 뿐이지 이산화탄소 가스의 배출은 역시 원천적으로 차단하기가 거의 곤란하다. 결국은 재사용의 선택만이 효과적으로 이를 최대한 억제할 수 있는 바른 길이 될 수 있을 것이다. 한편, 최근에 들어서 이른 바 눈에 보이지 않는 자원 전쟁의 분위기가 전세계적으로 고조되고 있는 실정이다. 희귀 금속 자원을 보유하고 있지 않는 국내의 경우는 전반적으로 산업 분야에 걸친 생산 제조 활동에서 요구되고 있는 부품 소재용 원천 금속 자원을 매년 막대한 외화를 지불하며 종속적으로 중국 등의 국가들로부터 수입에 의존하고 있다. 이 또한 매년 일정한 수입 량이 보장되지도 않을 뿐만 아니라 해마다 관세가 높아져 여간 골치 아픈 일이 아니다. 따라서 생산 제조 활동을 주로 하여 수출에 많은 기대를 하고 있는 OECD 국가의 일원인 구내의 경우에는 환경적인 측면과 경제적인 측면을 동시에 고려한 이른바 에코지향형 생산 제조 활동을 더욱 심도있게 추구할 당위성이 제기된다. 이 중의 하나가 바로 생산 제조 활동의 주역을 이루는 매개체 중의 일원인 에코융합형 신개념의 절삭 공구라고 할 수 있다.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.37-42
• /
• 2011

Copper chip scrape has been occurred by cutting of copper pipe. The feasibility of copper chip scrape into the copper powder by milling was studied. Two milling type such as rod milling and horizontal balling milling were applied in this research. Copper chip can not fragmented into powder by using rod milling. In contrast to rod milling, copper chip can be changed into powder by horizontal ball milling for above 36 hours. It was found that recycling of copper chip scraps into copper powder by horizontal ball milling is possible and powder fraction percent ($75{\sim}150{\mu}m$) of milled copper chip for 48 hours is 25.3%.

• Clean Technology
• /
• v.12 no.3
• /
• pp.171-174
• /
• 2006

The adsorbent for removal of heavy metal ions is prepared reutilizing the leached sludge generated in process of making the red mud coagulant we have develope. The pellet-type adsorbent is made by heat-treating a mixture of 10g of the leached sludge, 1g of kaolin, and 2 g of sodium silicate solution at $600^{\circ}C$ for 2 hours. In experiments of batch adsorption, the adsorbent shows good performance in adsorption of $Pb^{2+}$ ion.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.138-138
• /
• 2018

선박을 통한 해상수송은 세계 무역의 80% 이상을 차지하고 있으며, 대부분의 선박은 저질중유의 연소로부터 추진력을 발생시키는 디젤 엔진을 원동력으로 사용하고 있다. 이러한 디젤 엔진은 연소의 부산물로 매년 백만 톤 이상의 오염물질을 방출하는데, 그 주성분은 탄소로 이루어져 있고 고온 열분해 또는 압축 점화 엔진의 작동 부산물들이 소량 포함되어 있다. 이에 본 연구에서는 선박으로부터 배출된 폐 수트를 리튬이온전지용 도전재로 활용하기 위한 독특한 방법이 제안되었다. 실험에 사용된 폐 수트는 운항중인 컨테이너선으로부터 수집되었으며, 수집된 폐 수트는 탄소 성분 이외의 불순물을 제거하고 흑연화 정도를 개선시키기 위해 $2,000^{\circ}C$로 열처리되었다. 열처리된 폐 수트의 모폴로지를 확인하기 위해 투과전자현미경을 이용하여 그 형상을 관찰하였으며, 이를 통해 폐 수트의 일차 입자는 지름이 약 70-100 nm 정도인 양파껍질 모양의 탄소(carbon nano-onion)로 형성된다는 것이 확인되었다. 또한, XRD, RAMAN 분광법 및 BET 분석 결과를 통해, 열처리된 폐 수트가 결정성이 있는 흑연으로 재형성되었으며 비표면적은 일반적으로 사용되는 활물질에 비해 약간 더 높다는 것을 확인할 수 있었다. 한편, 이러한 특성은 리튬이온전지용 도전재로 활용될 수 있는 가능성을 보여주었고, 이는 전기화학적 정전류 충전 및 방전 테스트를 통해 그 성능이 확인되었다. 일반적으로 사용되는 도전재의 테스트 결과와 폐 수트를 도전재로 사용한 테스트 결과를 Fig. 1에 나타내었다. 이상의 실험 결과들을 미루어 볼 때, 선박으로부터 배출된 폐 수트가 리튬전지용 음극 활물질 및 도전재로 재활용될 수 있을 것으로 사료된다.

• Resources Recycling
• /
• v.3 no.1
• /
• pp.25-31
• /
• 1994

This paper was focused to optimize hot extrusion condition of Mg machined chips and scraps as fundamental basic research for the recycle of Mg alloy. We have been performed to extrude at $300~380^{\circ}C$ temperature range under the extrusion ratio of 25:1 after cold-pressing AZ91 Mg machined chips and scraps. AZ91 Mg ingots was used as reference materials. Microstructure observation showed that the extruded machined chips were perfectly bonded and extruded materials became fine grain size($20\mu\textrm{m}$) by recrystallization during hot extrusion. The specimens extruded from the machined chips, scraps and Mg ingot indicated tensile strength of 330MPa and the elongation of 10% at room temperature.