• Title/Summary/Keyword: 재킷 개발

Search Result 56, Processing Time 0.025 seconds

Comparison of brand-name school uniform patterns for middle school boys and the development of school uniform patterns by students' body shape, using 3D virtual clothing simulation (3D virtual clothing simulation을 활용한 남자 중학생의 브랜드교복 패턴비교 및 체형별 교복 패턴개발)

  • Shin, Jang-Hee
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.23 no.1
    • /
    • pp.143-154
    • /
    • 2021
  • This study attempted to develop winter jackets and pants patterns reflecting the latest comfortable and active school uniform trends, using middle school boy avatars having various body shapes. Jacket and pants pattern-drawing methods and margins differed. Based on the results, research prototypes were prepared. Then, virtual wear prospective drawings, clothing pressure, and appearance were assessed according to body shape. Jackets were assessed using 25 factors, while pants were assessed using 19. Then, correlations between the jackets and pants were analyzed. According to the analysis, the reason why the dart & tuck position and margin were rated low was confirmed. In a virtual wear assessment on jacket patterns by body shape, a significant difference was found in all categories, except for fit and shape at the front bottom, sleeve length on the side, and the center back line. The virtual wear assessment on the pants patterns by body shape also revealed a significant difference in all categories, except for pants length. In jackets, a significant influence was observed around the shoulders and waist in Type 1 and around the belly in Type 2. On the contrary, for pants, a significant influence was found around the hip and waist in Type 1 and around back crotch in Type 2. Therefore, they should be considered when making of jackets and pants. The above results suggested that jacket and pants patterns should vary depending on body shape. It is anticipated that there should be further studies comparing brand-name school uniforms for middle school girls and school uniforms by body shape.

The study of developing the freezing seal isolation method for the pre insulated heat transfer pipe (이중보온 열수송관에 대한 동결차수공법개발에 관한 연구)

  • You, Byounghee;Ahn, Changkoo;Kim, Woocheol;Shin, Ikho
    • Journal of Energy Engineering
    • /
    • v.26 no.3
    • /
    • pp.105-112
    • /
    • 2017
  • A lot of piping systems have been used from nuclear power systems to water supply systems. The maintenance of the piping systems is needed to ensure proper operation of the piping systems. Failure of the large pipe systems especially such as KDHC(Korea District Heating Corporation) can be a matter directly related to the enterprise productivity and profitability. It can also lead to very important issues in promoting public safety and convenience. Therefore a method of quick and safety repairs have been emerged as the most important problem. In this study, freezing seal isolation method using liquid nitrogen cryogenic refrigerant was developed for the maintenance of a pre insulated heat transport pipe of KDHC with a diameter of 300 mm. In this study, by employing computational analysis techniques we performed the flow and heat transfer analysis for the targeted pre insulated heat transfer pipe and freezing seal jacket(ice-Plug) and have selected for optimal system. The detailed design model based on the results of the computational analysis finally was produced. A laboratory-scale test apparatus were designed and the freezing seal isolation self-test carried out. Also the performance assessment tests in the test bed of KDHC were carried out for on-site application.

Future of Stereoscopic 3D through the Analysis of Realistic Media Art (실감미디어 아트 분석을 통한 3D 입체영상의 미래 조망)

  • Kim, Hee-Young;Shin, Chang-Ok
    • The Journal of the Korea Contents Association
    • /
    • v.12 no.1
    • /
    • pp.91-102
    • /
    • 2012
  • Generally today's culture and the arts industry has been focusing more on economic value than the arts. Therefore this paper will elucidate the meaning of the culture and the arts can be a break though which can only include commercial and economic values but transcend its values ultimately. First of all, this paper will suggest an advanced 3D stereoscopic images by analysis of examples and environments of realistic media arts. Looking into the changes of related technologies and market environments, the motion-recognition technology, as seem in SF film "Minority report", has become a feasible technology. In the past, 3D stereoscopic images were shown in the theme park theatre and exhibition halls for group viewing. but recent 3D TV and display devices have changed those environments to personal. Since domestic researches of realistic media art has been little, this paper will analyze them respecting to three broad classifications. The results are : Firstly, in CAVE method, more impact capabilities of spectators are expected that they can manipulate interactive interfaces freely and the physical movements of spectators can operate interactively. Secondly, inter-network communications and expansion of viewers' perceptions are predicted by way of HMD method, sensor suites and communication equipments. Thirdly, combinations of HMD and motion tracking utilization is foreseen. With the convergent usages of these three features, we can prospect the possibilities of interactive 4D that spectators wearing 3D stereoscopic display devices can experience and make their own 3D stereoscopic images actively at the point of their views.

Usability Evaluation and Development of Design Prototyping for MP3 Smart Clothing Product (MP3 스마트웨어 제품 상용화를 위한 디자인 프로토타입 개발 및 사용성 평가 연구)

  • Chea, Heang-Suk;Hong, Ji-Young;Kim, Jun-Hee;Kim, Jin-Hyung;Han, Kwang-Hee;Lee, Joo-Hyeon
    • Science of Emotion and Sensibility
    • /
    • v.10 no.3
    • /
    • pp.331-342
    • /
    • 2007
  • This study focused on developing MP3 smart clothing products and usability evaluation. MP3 smart clothing which was developed in this study contains e-textile keypad and a kit. The kit consists of MP3 Player, remote controller module and ear phone, and are easy to assemble and dismantle. And usability evaluation about MP3 smart Clothing which was developed in this study contains e-textile keypad and a kit. For making the MP3 Smart clothing, e-textile signal line and keypad was developed and a metal connection ring also was manufactured to adhere closely e-textile signal line to keypad. The last products are two kinds of MP3 smart clothing, jacket style of MP3-YSJ(Yonsei Smart Jacket) and safari style of MP3-YSS(Yonsei Smart Safari). Then usability evaluation conducted two times about MP3 smart clothing developed. Usability evaluation is classified by a module evaluation and an item evaluation. The module evaluation measured external appearance, material, a music controller, an ear phone(or a mini speaker) and connector. The item evaluation measured social acceptance, feeling of wearing, utility, easiness of maintenance and safety. The module evaluation described totally positive results in the first usability evaluation about MP3-YSJ 1.0 and MP3-YSS 1.0. The item evaluation shows a lower score in the social acceptance, especially the easiness of connector maintenance and the social acceptance of music-controller in MP3-YSJ 1.0 and MP3-YSS 1.0. The second usability evaluation conducted with improved products by the first usability test results. Results from second item evaluation indicated needs to improve the easiness of connector & music-controller maintenance and the social acceptance of music-controller in MP3-YSJ 2.0. In MP3-YSS 2.0, the easiness of material management and the social acceptance of music controller & connector needed to improvement. In particular, users felt inconvenience in the social acceptance because of e-textile keypad arrangement. To outweigh this disadvantage, further study is needed about keypad interface of the music controller.

  • PDF

A Study on Epidemiology of Drowning Accidents associated with Recreational Aquatic Activity (여가 수중활동과 관련된 익사사고의 역학 분석 연구)

  • Son, Jae-Young;Ko, Wi-Sug;Cho, Byung-Jun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.11
    • /
    • pp.5060-5065
    • /
    • 2012
  • The purpose of this study was to report the incidence of drowning accident in order to prevent and decrease the accidents of drowning. Data were obtained on all accidents of drowning accidents occurred from January to December 2007 were identified by using the Emergency Activity Daily Report Data from the National Emergency Management Agency (NEMA). The age, weather, date, location, time and case of the drowning accident were examined. The Chi-square test was used to compare each group. All comparisons were made at the p<0.05 level of significance. The result show that the age of drowning accidents for victims aged 20-29 was 27.9%, and for victims aged 30-39 years, 18.7%. In reguard to the age group, drowning accidents during recreational aquatic activity was age 20-39; 51(44.8%). In reguard to the locations, the number of drowning accidents in a lake or reservoir during recreational aquatic activity was 62(53.4%). The number of drowning accidents in a lake or reservoir during etc was 51(58%). In reguard to the days, the number of drowning accidents on Saturday during recreational aquatic activity was 30(25.8%), on Sunday 32(27.6%). The weather of drowning accidents during recreational aquatic activity was sunny 60(51.8%), rainy 40(34.4%), cloudy 16(13.8%). The season of drowning accidents during recreational aquatic activity was summer 53(45.7%). In reguard to season, two groups are significantly different. Drowning is a leading cause of injury related accidents. Understanding the characteristics of drowning is the first step to developing prevention strategies that may be beneficial for people of all ages and under nearly all circumstances are increased swimming ability, lifeguard staffing, providing life jackets, and public education activities.

아바타 시스템과 한국의 복식문화 접목을 통한 "디지털 복식 아바타" 개발에 관한 연구

  • 김영삼
    • Proceedings of the Korea Society of Costume Conference
    • /
    • 2003.05a
    • /
    • pp.42-42
    • /
    • 2003
  • 세계적으로 인터넷 이용 인구는 2002년 2월 현재 5억 4천 4백만여명에 이르고 있으며, 우리나라의 인터넷 이용 인구는 2001년 12월말 자료에 의하면 2천4백3십8만여명에 달하는 것으로 보고되고 있다(한국 인터넷정보센터통계보고서, 2002). 또한, 네오위즈는 작년 한 해 아바타 매출 100억원을 돌파, 다모임은 지난해 12월 한달간의 아바타 매출이 3억 6000만원에 달하였으며, 다움(Daum)의 경우 서비스 개시 15일 만에 일일 발생 매출이 1천만원 돌파, 현재 1일 3천500만원의 수익을 올리는 등, 아바타 선두 업체 뿐 아니라 후발 주자들도 큰 수익 창출하고 있다(Economy21- 2002.04.25). 올 한해 아바타 시장규모는 800억원-1000억원으로 예상되고 있으며, 이러한 시장 증대에 따라 기존 캐릭터 업체들이 구축계약 위주에서 서비스 제휴사업으로 아바타모델 제안 및 시장영업이 증대되고 있다. 즉, 아바타 시장은 구축되어 있는 것이 아니라 계속적으로 확대되어 가고 있음. 또한 아바타산업은 인터넷 인프라의 확산과 더불어 아바타의 호응 또한 급격히 상승하고 있으며, 단순히 사이버 세계에서의 분신으로서의 역할에서 벗어나 다양한 부가가치를 구현하는 아바타의 등장으로 아바타의 확산은 계속적인 추세이다. 또한 아바타는 게임, 채팅, 일정관리등 인터넷 전 분야에 걸쳐 Cyber Agent활용도가 확산되고 있으며, 아바타 시장은 초기 일본형 애니메이션 아바타에서 벗어나 아바타와 패션, 아바타와 문화의 접목에 대한 관심이 상승되고 있으며 이로 인한 신규시장이 창출되고 있다 이러한 디지털 시대로의 급격한 발전은 복식문화를 디지털 문화컨텐츠 사업화로의 그 발전방향을 제시하고 있다.2cm 적용하고, 진동두께 계산식은 (B/8-1.5)+2cm를 적용함으로써 진동깊이와 진동두께의 편차가 작아짐으로 인해 소매부위와 진동부위의 맞음새를 향상시켰다. 3) 가슴둘레의 증가에 따라 등길이에 앞길이 치수를 증가시키는 계산식을 설정하여 앞가슴둘레의 맞음새를 향상시켰다. 4) Plus-size여성의 경우 허리부분의 신체적합성을 높이기 위하여 사이드 판넬(side panel)의 재킷원형으로 하였다. 앞 허리와 배 부분의 지방 침착이 크므로 앞 허리둘레 다아트 폭과 앞판 사이드 판넬(side panel) 솔기 다아트 폭을 작게 설정하고, 뒤판 사이드 판넬 솔기 폭을 크게 설정하였다. 5) 어깨끝점 사이길이는 다른 부위의 체지방 침착과 같이 비례적으로 증가하지 않으므로 표준체형에 비해 좁게 설정하였다. 보여주어 우리나라의 선호 질감과는 차이가 있었다. 실제 판매율을 살펴본 결과 주관적 질감 이미지 평가의 선호도와의 비교에서 약간의 차이가 있었는데, 이는 질감 외에 가격이 구매에 영향을 미쳤기 때문으로 분석되었다., 2002; Huun et al, 2001).의 특징이라 할 수 있겠다. 대한 자부심과 국제 사회에서 차별화 할 수 있는 한국 복식 디자인에 독창성과 창조성을 표현하는 중요한 영역임을 인식할 수 있었다.와 보호인자를 재확인할 필요가 있다고 보며 본 연구의 결과는 지역민의 대장직장암 예방을 위한 영양교육 자료로서 활용될 수 있다고 본다. 관여도에 영향을 미치고 있음을 알 수 있었다. 유지되어 쾌적역이 향상된 것으로 사려된다.하였으며, 효율적인 색채 정보로서 활용될 수 있는 패션 색채 팔레트를 제시하였다는데 의의가 있다.′, aesthetic of ′unity in multiplicity′, a

  • PDF