• Journal of Korean Association for Spatial Structures
• /
• v.21 no.2
• /
• pp.67-79
• /
• 2021

This paper aims to develop numerical models for seismically-deficient reinforced concrete columns retrofitted using a fiber-reinforced polymer jacketing system under blast loading scenarios. To accomplish the research goal, a coupling model reproducing blast loads was developed and implemented to the column model. The column model was validated with a past experimental study, and the blast responses were compared to the numerical responses produced by past researchers. The validated modeling method was implemented to the non-retrofitted and retrofitted column models to estimate the effectiveness of the retrofit system. Based on the numerical responses, the retrofit system can significantly reduce the peak dynamic responses under a given blast loading scenario.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.615-622
• /
• 2015

As the development of high efficiency and high flux density LEDs, the trend of illumination lamp industry transfers from conventional-lamps to the LED-lamps. For energy efficiencies, LED lamps are superior to the conventional lamps, but they have heat problems. Especially, the heat problems are severe for the high luminance lamps. They degrade the soldering point of the metal PCB, and shorten the life cycle of LEDs. So, the solution of the heat sinking is very important to develop high luminance LED lamps. This study suggested a new method to solve the heat problems for high luminance LED lamps, and developed a LED lamp which has 1200W power. In this study, a water jacket is installed to the LED lamp, and the cooing water is circulated by a water pump.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.8
• /
• pp.969-980
• /
• 2003

The aim of the study is to develop a jean jacket and pants of easy-to-move for schoolgirls of 11 years old. The research was carried out as follows; 1. Using a manufacturer's pattern, a jean jacket and pants were made. 2. Based on the survey of 108 schoolgirls, interviews with 4 designers of children's wear, and wearing test, three trial garments were developed. -Certain areas such as knee, elbow, and hip should be altered to have better extensibility. -The weight of the garment would be better to be reduced. 3. Three trial garments were developed using following techniques, which were found in fashion magazines for kids very often. -Alter the location and the shape of the seam line so that the areas mentioned above can adjust the movement of the body better. -Match stretchable material at the areas which require better extensibility. -Use various trimmings to make the garment more size adaptable and easy-to-move. 4. These garments were tested by 26 schoolgirls, and they answered the questionnaires focused on the design preference and easy-to-move. 5. From the results of the wearing test of three trial garments, more effective techniques were selected. Using these techniques, prototype garment was developed. The prototype garment was approved by the wearing test of 26 schoolgirls.

• Composites Research
• /
• v.14 no.6
• /
• pp.32-37
• /
• 2001

It is known that recoating or protection with glass-tube can prevent FBG sensor from being affected by birefringence. However, the effect on the strain transfer of such treatment has not been verified yet. Three types (uncoated, recoated and glass-tube protection) of FBG sensors are fabricated to verify the effect on the strain transfer of each treatment. The strain from each sensor embedded into a graphite/epoxy composite specimen was compared with that of ESG attached on the surface through the tensile test. And the signal characteristics of each sensor were also compared using the tensile test of a tapered aluminum specimen which was under the state of strain gradient.

• Journal of Fashion Business
• /
• v.6 no.4
• /
• pp.46-61
• /
• 2002

The purpose of this study was to analyze critical needs and demands for the multifunctional traveler's jacket and to develop design prototypes based on the findings from the analysis. A self-report questionnaire with the stimuli was applied. Total 163 travelers were purposively sampled for the survey and the data were analyzed quantitatively as well as qualitatively. The results were as follows: 1. The respondents were divided into three groups - "digital-functionality-needs group", "non-digitalfunctionality-needs group", "no-need group", according to their preference and needs for the multifunctional traveler's jacket. 2. The three groups were analyzed (1) to have meaningful differences in experiencing inconvenience in their traveling, (2) to have statistically significant differences in their needs for the multifunctional traveler's jacket, (3) while some imperative consensus in their needs were found in part. 3. Based on the findings of the analysis mentioned above, three design prototypes were developed and visualized with conclusion.

• Journal of the Korean Society of Costume
• /
• v.64 no.3
• /
• pp.77-92
• /
• 2014

The purpose of this research is to examine the expression methods of Haute Couture designers' high value-added jacket designs, In order to achieve this, the positions and sizes of the design component items of tailored jackets designed by Haute Couture designers from the 1940s to the 1970s were analyzed. The results of the analysis are as follows. First, the silhouette changed while leading the contemporaneous fashions, and such changes could be confirmed by the width and length of the jacket's shoulder, chest, waist, and hem that determine the silhouette. Particularly, the length of the chest changed which signifies that the depth of the armhole was playing an important role in the production of high value-added jackets in relation to the sleeves and the fit of jackets. Second, the position and the size of the dart are the components that can express the fit of a jacket and the designer's creativity, The starting point position of the dart and the position passing by waist, and the position of the end of the dart were placed in the position beyond B.P. depending on the designer's creativity and techniques, deriving the changes of the silhouette and creating high value-added jackets. Third, the tailored collar, which was a three-dimensional component made up of the upper collar, gorge line, lapel, and break line, was an important component that could express high value-added jackets. Changes in the width and the height of the break line position of the sides of the neck were represented as changes in the neck size of the collar, and changes in the vertex locations of the upper collar corner-point, the gorge line (the corner-point of the lapel and V zone) were also represented as diverse tailored collar designs. And the differences in the width and the length of each component of the collar were related to each other and represented as changes in the slope and angle of the collar outline. Fourth, the changes in sleeve designs of the jacket were in such items as the width of the sleeve opening, the width of the sleeve hem, and the length of the sleeve, and were represented as diverse sleeve designs such as widened sleeve opening types, and straight line types.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1991-2001
• /
• 2009

This study provides basic information that is needed to build marketing strategies related to consumer brand-switching, through the investigation of consumer motivations for brand-switching, as determined by the types of fashion products. The study was implemented by a descriptive survey method using a questionnaire. The survey was conducted during the period of May $11^{th}$ through July $5^{th}$ 2008. A total of 184 completed responses were analyzed. All respondents were from the Seoul area and between the ages of 20 and 31. Factor analysis and Cronbach's alpha coefficients, one-way ANOVA and Duncan test were employed for the analysis of data. Significant differences were found in brand-switching motives according to the types of fashion products. For clothing, shift behavior occurred more often in conjunction with the attributes of the products itself, such as design, color, price, size, and fiber content. In general, clothes more than shoes, were likely subject to brand-switching most often on the basis of situational factors. On the other hand, for shoes, more brand-switching activities occurred because of non-product attributes, such as discounts, coupons, desire for a change, and wearing of friends. In light of the results, there is a need to differentiate brand related marketing strategies with respect to clothing and shoes. For clothing, efforts focusing on the improvement of the product attributes will be more effective in minimizing brand-switching. There is also a need to improve instructions for increasing the product understanding of salespersons as well as the ability to give advice in accordance with personal consumer characteristics. With regard to shoes, greater efforts should be given to promotional activities, and the desire of consumers for a change in order to prevent brand-switching of customers.

• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.363-373
• /
• 2016

This study aims to develop an all-fabric integrated smart jacket in order to create a temperature-regulating system based on a user experience design. For this research, previous research technologies of a textile switch interface and a temperature-regulating system were utilized and a unifying technology for the all-fabric integrated smart jacket was developed which can provide the appropriate temperature environments to the human body. A self-heating textile was applied at the areas of the back and hood in the final tested jacket, and an embroidery circuit was developed in the form of a rectangle in the back and in both ears of the hood, taking into account the pattern of the jacket part where it was be applied and the embroidery production method. The textile switch interface was designed in a three-layer structure: an embroidery circuit line in a conductive yarn, an interval material, and a conductive sensing material, and it was made to work with the input and output sensors through the multiple input method. After the all-fabric integrated smart jacket was produced according to the pattern, all of the textile band lines for transmission were gathered and connected with a miniature module for controlling temperature and then integrated into the inside of the left chest pocket of the jacket. After the users put on this jacket, they were asked to assess the wearing satisfaction. Most of them reported a very low level of irritation and discomfort and said that the jacket was as comfortable as everyday clothing.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.926-933
• /
• 2011

The purpose of this research was to develop a smart wear equipped with wearable technologies for women in the age of 50's and 60's and confirm its acceptability. For this, we constructed a casual jacket that has the integration of heating and lighting function, and evaluated the user's satisfaction. The size of the heating device attached at the back of the jacket was 300 mm in width and 120 mm in length and the size of the one attached at the front abdomen was 180 mm in width and 120 mm in length. The power supplier was the unification of the battery and controller which have been waterproofed. The lighting device connected with LED was 26mm in width, 20 mm in length and 1.5 mm in thickness. It has been designed in a waterproofed rectangular shape and was attachable to the jacket. The satisfaction survey of a smart jacket has been conducted with three standards, which were convenience, appearance and practicality. Free physical movement among the standard of convenience had very high scores with the average of 4.7 on a five point-scale. The acceptability of the jacket was 4.6, which proved that it didn't have unique feelings compared to ordinary ones. The evaluation score of the appearance of the jacket was 4.5. Especially inside finishing of the jacket received the highest scores from all ages. According to the evaluation of practicality, there has been no change in the appearance of the jacket and the function of heating device after laundry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.2
• /
• pp.365-381
• /
• 2016

This study compared and analyzed current sleeve head products for men and women to develop sleeve head products for aesthetically-designed sleeves. Men and women's sleeve head products, suitable for sleeve caps, were designed and developed based on the results. The study results are as follows. First, men and women's sleeve heads for aesthetic jacket sleeves were designed with sleeve patterns in the background. Sleeve heads and upper sleeves were additionally designed to make 7-layers for men and 4-layers for women. Second, sleeve head patterns were designed so that men's would have a whole length of 48cm, an angle of $30^{\circ}$ and a width of 4.5-7.5cm; in addition, women's would be 40cm, $30^{\circ}$ and 4-5cm. Third, the same materials were used for men's and women's sleeve head products, and the background was made from 1-layer of soft non-woven fabric. As for the sleeve heads, 2-layers and 1-layer of non-fusible interlinings were used for men's and women's, respectively. In order to provide flexibility, the materials were designed in a bias direction. For upper sleeves, 1-layer of non-woven fabric and felt were used for men's, and 1-layer of felt for women's so that an empty space caused by easing contraction can be supplemented.