• Explosives and Blasting
• /
• v.25 no.2
• /
• pp.23-33
• /
• 2007

It is difficult to measure a blast noise in the vicinity of tunnel blasting works and the effect of lowering noise changes very highly with types of soundproof materials. So, the main interest of this study focuses on the materials of a soundproof facilities and the method of noise forecast in a near distance. 20 types of the soundproof facilities are established and blast noise is generated using firecracker in a Hume concrete pipe. To analyze the variations of magnitudes of noise and frequency with the soundproof materials and types, the noise and frequency is measured in a short distance next to blast area.

• Journal of Conservation Science
• /
• v.32 no.1
• /
• pp.75-88
• /
• 2016

In this study, 5 mural paintings in the Buddhist temples of Joseon era were researched for component analysis on the soil contained in the walls. The results of particle size analysis showed that the ratio of particle contents were different in each layer. In the finishing layer, the distribution of the middle sand fraction is higher than that of the middle layer. The results of XRD analysis showed that quartz, feldspar, and clay mineral are the main components of sand, suggesting similar mineral composition to that of ordinary soil component. It seems weathered rocks were used for construction of the walls. The main chemical components detected from EDX analysis were Si, Al, Fe, and K. Also the SEM images showed sand or clay sized minerals. In conclusion, the walls of the buddhist mural paintings in Joseon Dynasty had been constructed by using the loess, and had been produced by using mixture of clay and sand particles of different sizes for each layer. This study identified the characteristics of the materials and the manufacturing technologies used on the walls of mural paintings of Buddhist temples in Joseon era.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.985-991
• /
• 2008

This paper presents a novel balanced mixer receiver front-end design based on a metamaterial structure applicable to differential-/common-mode excitation. This metamaterial structure functions as a leaky-wave antenna and provides in-trinsic common-mode suppression. Low LO leakage and high RF to LO isolation are achieved without additional filters for LO and RF paths. The metamaterial is based on a unit-cell which under a differential-mode excitation behaves like a composite right/left-handed(CRLH) metamaterial. In contrast, the metamaterial unit-cell is below cut-off under a common-mode excitation. Experimental results are used to verify the proposed metamaterial's differential-/common-mode characteristics. The metamaterial is integrated with a balanced mixer design resulting in an operation frequency range of $1.96{\sim}2.40$ GHz with an optimum mixer conversion loss of 21.1 dB at 2,4 GHz.

• The monthly packaging world
• /
• s.263
• /
• pp.109-119
• /
• 2015

환경부는 '제품의 특성상 낱개로 포장'이 필요한 경우에 Tea-bag, 색깔구분이 필요한 점토류 완구에 대한 개별포장을 포함하여 현재 포장기술에 부합하는 제도로 개선하고자 "제품의 포장재질 및 포장방법에 대한 간이측정방법" 고시 일부 개정안을 발표했다. 본 고에서는 주요 개정 내용과 함께 측정방법에 대해 자세히 살펴보도록 한다.

• Computational Structural Engineering
• /
• v.8 no.3
• /
• pp.79-89
• /
• 1995

Two-element plate concept is incorporated into the buckling problem in order to simplify the nonlinear distribution of stress through the thickness of plate. Finite element formulations and programs based upon the Reissner functional and the modified Reissner functional using two-element plate concept are developed for buckling analysis of plates under axial compression. The two programs have been applied to obtain the linear elastic buckling behavior of axially compressed flat plates. Excellent agreement of linear elastic-solution results with exact or approximate solutions of other authors for the same boundary conditions proves the validity of the finite element method using two-element plate theory.

• Journal of the KSME
• /
• v.32 no.4
• /
• pp.371-378
• /
• 1992

발전용 터빈 부품중 회전체인 로터의 수명평가를 간단히 소개하고 수명평가시 고려되는 주요 재질특성에 대하여는 간단한 설명과 데이터를 이용하는 방법을 기술했다. 정확한 수명평가를 위해서는 금속학적인 고찰을 병행하여 경년열화와 효과를 고려하고, 실제 가동 조건과 동일시할 수 있는 각종 데이터를 적용해야 하나 본문에서와 같이 실험에 따르는 제약이 많아 추정 또는 가공된 데이터를 이용한다. 신뢰성 높은 수명평가를 위해선 각종 데이터 확보를 위한 실험장치의 개선과 실험방법의 개발이 매우 중요하다고 본다. 또한 현존하는 재료제조 기술상 초기부터 일 정한 허용결함을 인정하면서 설계, 제조, 가동되고 있는 각종 설비에 경제성을 극대화시키면서 동시에 안전을 확보하는 것은 매우 어렵지만 피할 수 없는 당면과제라 생각한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.384-389
• /
• 1997

고분자 촉매 담체인 스티렌-디비닐벤젠의 제조시 중합반응 개시제의 함량에 따른 영향과 반응기의 재질에 따른 영향을 수소흡착실험을 통하여 확인하였다. 담체의 중합반응시 제조조건이 동일하다 할지라도 개시제의 함량에 따라서 담체의 기공 특성이 달라지므로 개시제의 함량은 모노머 양의 1%를 사용한 시료가 수소흡착능이 가장 좋은 것으로 나타났다. 반응기의 재질은 teflon으로 직접 제조한 것보다는 teflon으로 코팅 처리한 것이 더 수소흡착능이 좋은 것으로 확인되었다.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.32-37
• /
• 2003

For the reduction of electromagnetic biological effects from cellular phones, the electrical field radiation from cellular phone antenna is reduced by using partial ferrite material added on the phone case as ground plane. On the given properties (permittivity, permeability and conductivity) of ferrite material, the characteristics of monopole antenna is analysed depending on the variation of ferrite added configuration(thickness and shape). According to this analysis, the design method and direction to minimize the biological effects to human head is proposed in 1.7 GHz band PCS phones. For the exact analysis involving the permittivity, per-meability and conductivity of ferrite material, FDTD numerical method is used.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.747-752
• /
• 2009

This research was performed by means of several different virgin granular activated carbons (GAC) made of each coal, coconut and wood, and the GACs were investigated for an adsorption performance of bromate in a continuous adsorption column. Breakthrough behavior was investigated that the breakthrough points of the virgin two coals-, coconut- and wood-based GACs were observed as 9252 bed volume (BV), 6821 BV, 5291 BV and 2431 BV, respectively. The experimental results of adsorption capacity (X/M) for bromate showed that two coal- based GACs were highest (1334.5 and 798.2 ${\mu}g$/g), the coconut-based GAC was intermediate (668.6 ${\mu}g$/g) and the wood-based GAC was lowest (156.8 ${\mu}g$/g). The X/M of the coal-based GACs was 2~8.5 times higher than the X/M of the coconut-based and wood-based GACs. The results of carbon usage rates (CURs) for the virgin two coal-, coconut- and wood-based GACs were shown as 0.19, 0.25, 0.33 and 0.71 g/day respectively. The adsorption capacity, k values, were also investigated by means of the GACs for bromate. The k values of two coal-, coconut- and wood- based GACs for bromate were found to be 121.3, 76.7, 43.3 and 14.6 respectively. This results suggested that using the virgin GAC made of coal was the best selection for removal of bromate in the water treatment for an advanced treatment.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.33-41
• /
• 2010

The archival objects are tangible evidence reflecting public work as forming archives which are administrative, historic, symbolic, cultural and artistic value. They are produced from the various countries so that they have different material and manufacture techniques. However there are difficulties in conservation and management because the material investigation and conservation management system are not established. Therefore this research presents fundamental data for the efficient conservation management by material investigation and condition check metal archival objects. Among the public official presents made of metal, 12 pieces which are discoloration, oxidation, loss or crack are chosen for this research. In order to examine extensive condition of metal archival objects, the condition check card used from the domestic museum and the national museum in Japan are collected and then the new check card is produced. X-ray is used to know the making technique, binding means between different material. Portable-XRF is also used for the chemical composition analysis of metal archival objects, and then classifying respectively according to their material. As a result of condition check, it is possible to investgate the appearance character, deteriorated parts and weak parts of structure. Also P-XRF could find out the composition of metal archival objects which is different from existing condition check card. Therefore the research results can be used as fundamental data for further conservation and management as well as long-term conservation.