• Journal of the Korean Electrochemical Society
• /
• v.21 no.2
• /
• pp.39-46
• /
• 2018

Many studies on the electrochemical performance of Li secondary batteries have been obtained using coin-type cells due to the ease of assembly, low cost and ensuring reproducibility. The coin-type cell consists of a case, a gasket, a spacer disk, and a wave spring. These structural features require a greater amount of liquid electrolyte to assemble than other types of cells such as laminated cells and cylindrical cells. Nevertheless, little research has been conducted on the effect of excess liquid electrolytes on the electrochemical performances of Li secondary batteries. In this study, we investigate the effect of different amounts of electrolyte on the coin-type cells. The amount of electrolytes is adjusted to 30 and $100mg\;mAh^{-1}$. Cycle performances at room temperature ($25^{\circ}C$) and high temperature ($60^{\circ}C$) and high voltage are performed to investigate the electrochemical properties of the different amount of electrolytes. In the case of the unit cell including the electrolyte of $30mg\;mAh^{-1}$, the discharging capacity retention characteristic is excellent in comparison with the case of $100mg\;mAh^{-1}$ under the high temperature and high voltage condition. The former shows a larger increase in internal resistance than the latter, confirming that the amount of electrolyte significantly influences the discharge capacity retention characteristics of the battery.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.172.2-173
• /
• 2003

단백질, 탄수화물, 유지 등과 같은 생고분자를 소재로하여 제조하는 가식성 또는 생분해성 필름은 식품표면을 코팅하거나, 식품의 내부에 사용하여 식품을 외부의 충격으로부터 보호하고 식품의 저장수명을 증가시키는 동시에 수분, 기체 및 용질의 이동을 방지하는 기능을 한다. 이러한 가식성 필름의 소재 중 하나인 전분은 비교적 저가의 재료이고 기체투과를 방지하는 성질은 우수하지만, 탄력성이 적은 단점을 가지고 있다. 생고분자필름의 물리적 강도를 증진시키고 수증기의 투과성을 낮추는 방법으로 단백질과 탄수화물을 복합적으로 사용한다 본 실험에서는 분리 대두 단백질(SPI)과 옥수수 전분을 혼합하여 가식성의 생분해성 필름을 제조하고 이들의 이화학적 특성에 대해 연구하였다. SPI 필름은 SPI 5g에 증류수 100$m\ell$을 가해 glycerol 2g을 첨가해 제조하였으며, 옥수수 전분필름은 옥수수 전분 6g에 증류수 100$m\ell$을 가해 glycerol 1.2g을 첨가해 제조하였다. SPI와 옥수수 전분의 혼합필름은 SPI와 옥수수 전분의 양을 1：1 비율로 혼합하여 제조하였다. SPI 필름, 옥수수 전분 및 SPI와 옥수수 전분 용액의 혼합필름의 각각의 수증기 투과도는 7.49$\times$$10^{-11}$, 2.69$\times$$10^{-11}$, 4.24$\times$$10^{-11}$ g.m/m$^2$.s.Pa이었다. 본 실험으로 SPI의 단일재료로만 필름을 제조하였을 때보다 SPI 용액에 옥수수 전분용액을 혼합해 필름을 제조하면 탄력성을 유지하면서 수증기 투과도를 낮출 수 있다는 결과를 얻을 수 있었다.현미밥의 유리아미노산 분석 결과 필수아미노산을 포함한 다량의 아미노산이 존재하였으며 혈압강하 기능성 성분인 GABA(${\gamma}$ -amino butyric acid) 함량은 현미가 4.7 mg/100 g, 발아현미 20.8 mg/100 g이었으며, 동결건조 후 분석한 발아현미밥의 GABA 함량은 5.7 mg/100 g이었다. 발아현미밥의 관능검사 결과는 색, 윤기, 맛, 부착성, 응집성, 탄력성이 A가 유의적으로 높았으며, 외관의 경우도 A가 더 높은 평가를 받았다. 또한 전반적으로 A가 B에 비해 유의적인 차이를 나타내진 않았지만 더 나은 선호도를 나타내었다.좋게 평가되었다.＊값은 63-68사이로, a＊값은 0.13에서 -0.89사이를 b＊값은 2-5값 사이에서 변화하여 제조한 죽의 색이 옅은 황색임을 알 수 있었다. 고형분 함량, 퍼짐성과 pH에 대한 $R^2$은 각각 0.4280, 0.5433과 0.2406임을 볼 때 버섯, 당근, 대파의 비율에 따라 제조한 쇠고기 야채 쌀죽의 고형분 함량, 퍼짐성과 pH는 설정된 범위내에서 그 유의성이 인정되지 않아 큰 영향을 미치지 않음을 알 수 있었다. 관능검사 결과, 색과 향에 대한 반응표면 회귀식의 $R^2$은 각각0.6000과 0.7825이고 P-value는 각각 0.4290과 0.0942로서 5% 수준에서 유의한 상관성이 없음을 확인할 수 있었다. 맛과 점성에 대한 $R^2$은 0.8717과 0.8068이고 P-value는 각각 0.0195 (p ＜0.05)와 0.0612로서 야채의 배합비에 따라 맛에 있어서 유의확률 5%수준에서 그 유의성이 인정되었으며, 전체적인 기호도에 대한 유의성은 $R^2$이 0.8463이고 P-value는 0.034

• Korean Journal of Heritage: History & Science
• /
• v.50 no.3
• /
• pp.88-109
• /
• 2017

As the technique to remove Paraloid B-72, which is known as an irreversible material, the method using organic solvent and heating, though the ways vary depending on the kind of material to be removed, has been usually used, but it has yet to apply to mud mural because of the technical limit in processing and the potential risk of damage and, moreover, the removal efficiency which also remains unproven. Thus, in a bid to seek the way to safely remove Paraloid B-72 contained in mural, the test was conducted in a way of applying a compress method, which is deemed most efficient. The solvents which are proven to be Paraloid B-72 were applied to the absorbents such as active carbon fiber and methyl cellulose and then were eluted to the surface of mud mural sample which was prepared in the same size and condition for a certain time before evaluating the stability and removal efficiency. Such test was intended to identify the applicability to the mural of Mireukjeon Hall at Geunsansa Temple, which had been treated with Paraloid B-72 for preservation in the past. As a result, the way of mixing the absorbent such as active carbon fiber and Xylene alone or with other quick vaporable solvents proved to be most efficient in removing Paraloid B-72 from mud mural and particularly Acetone:Xylene(1:1wt%) was found to be the most stable among others. Such a test outcome is expected to be a useful data for removing Paraloid B-72 from the mural of Mireukjeon Hall at Geunsansa Temple as well as for restoring other mural cultural assets in the coming days.

• Membrane Journal
• /
• v.32 no.2
• /
• pp.116-125
• /
• 2022

In this experiment, an α-Al₂O₃ ceramic hollow fiber was used as a support, and a hydrogen membrane plated with Pd and Pd-Ag was manufactured through electroless plating. The Pd-Ag membrane was annealed at 500℃ for 10 h to form an alloy of Pd and Ag. It was confirmed that it became a Pd-Ag alloy through EDS (Energy Dispersive X-ray Spectroscopy) analysis. Also, the thickness of the Pd, Pd-Ag plating layer was measured to be about 8.98 and 9.29 ㎛ through SEM (Scanning Electron Microscope) analysis respectively. Hydrogen permeation experiment was performed using the H₂ gas and mixed gas (H₂ and N₂) in the range of 350~450℃ and 1-4 bar using the prepared hydrogen membrane. Under the H₂ gas condition, the Pd and Pd-Ag membrane has a flux of up to 21.85 and 13.76 mL/cm²·min and also separation factors of 1216 and 361 were obtained in the mixed gas at 450℃ and 4 bar conditions respectively.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.456-464
• /
• 2022

Hydrogen permeation performance was analyzed by manufacturing Pd and Pd-Cu membranes through electroless plating. As a support for the Pd and Pd-Cu membranes, α-Al₂O₃ ceramic hollow fiber were used. Pd-Cu membrane was manufactured through sequential electroless plating, and then annealing was performed at 500°C, for 18 h in a hydrogen atmosphere to make Pd and Cu alloy. After annealing, the Pd-Cu membrane confirmed that the alloy was formed through EDS (Energy Dispersive X-ray Spectroscopy) and XRD (X-ray Diffraction) analysis. In addition, the thickness of the Pd and Pd-Cu plating layers were measured to be about 3.21 and 3.72 µm, respectively, through SEM (Scanning Electron Microscope) analysis. Hydrogen permeation performance was tested for hydrogen permeation in the range of 350~450°C and 1~4 bar in hydrogen single gas and mixed gas (H₂, N₂). In a single hydrogen gas, Pd and Pd-Cu membranes have flux of up to 54.42 and 67.17 ml/cm²⋅ min at 450 °C and 4 bar. In the mixed gas, it was confirmed that the separation factors of 1308 and 453 were obtained under the conditions of 450 °C and 4 bar.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.204-212
• /
• 2022

Purpose: The aim of this study was to compare changes of bite force, occlusal contact area, and dynamic functional occlusion analysis after occlusal stabilization splint therapy during sleep for one month in a patient with bruxism. Materials and Methods: From October 2021 to July 2022, sleep bruxism of 30 patients who visited the Department of Oral Medicine at Yonsei University College of Dentistry Hospital were recruited. The participants were divided into two groups: using an occlusal stabilization splint during sleep (treatment; n = 15) and not using an occlusal stabilization splint (control; n = 15). Before using the occlusal stabilization splint and one month after, bite force, occlusal contact area and dynamic functional occlusion analysis (ratio of left/right bite forces, average bite forces, maximum bite forces, and maximum contact areas during lateral and anterior and posterior mandibular movements) were performed. Results: There was no difference in bite force and occlusal contact area between the treatment group using the occlusal stabilization splint and the control group not using the occlusal stabilization splint during sleep for one month. However, there were significant differences in the average bite force and maximum bite force in the lateral and anterior and posterior mandibular movements and the maximum contact areas in the anterior and posterior mandibular movements. Conclusion: The occlusal stabilization splint is helpful for sleep bruxism patients who lateral and anterior and posterior mandibular movements. In addition, further studies are needed a double-blind study with a large population.

• Membrane Journal
• /
• v.34 no.2
• /
• pp.146-153
• /
• 2024

In this experiment, a Ti-based flat hydrogen separation membrane was designed and manufactured. In order to find a Ti-based hydrogen separation membrane of a new composition, the correlation between the physical-chemical properties and hydrogen permeability of various alloys was investigated. Based on this, two types of new alloy films (Ti_14.2Zr_66.4Ni_12.6Cu_6.8 (70 ㎛), Ti_17.3Zr_62.7Ni₂₀ (80 ㎛)) was designed and manufactured. The manufactured flat hydrogen separation membrane was tested for hydrogen permeation using mixed gas (H₂, N₂) and sweep gas (Ar) at 300~500℃ and 1~4 bar. The Ti_14.2Zr_66.4Ni_12.6Cu_6.8 alloy film has a maximum flux of 16.35 mL/cm² min at 500℃ and 4 bar, and the Ti_17.3Zr_62.7Ni₂₀ alloy film has a maximum flux of 10.28 mL/cm² min at 450℃ and 4 bar.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.335-342
• /
• 2008

Purpose of study: To compare on bone formation between ovariectomized rats and normal rats after graft of alloplastic bone material. Material and methods: Twenty female rats were used in this study. They were divided into two groups by each ten rats. One group was ovariectomized and grafted alloplastic bone material. Other group was non-ovariectomized and grafted alloplastic bone material. After a healing time of 4 weeks, the animals were sacrificed and decalcified preparations were routinely processed for histologic evaluations. Results: Ovariectomy group was significantly lesser bone formation compared with non-ovariectomy group. Conclusions: Ovariectomy acts as a negative factor in new bone formation.

• The Journal of Engineering Geology
• /
• v.23 no.2
• /
• pp.161-170
• /
• 2013

We analyzed the effect of changing water level and turbidity on plants that serve to maintain slope stability on levees. In this experiment, soil collected from upstream of Imha Dam was placed in a water tank and planted with river plants of the Salix species: Salix gracilistyla, S. koreensis, and S. glanduosa. Plant regrowth was analyzed stage-by-stage during a recovery period. In addition, we assessed the tolerance of the plants to concentrated torrential rainfall and examined their recovery rates. The results indicate that in the case of these three Salix species, which are the most prevalent river plants in Korea, stem growth is arrested following serious damage and high turbidity. The possibility of regrowth was very low during the 20-day non-submerged recovery period. Although the number of leaves initially decreased during this period, subsequent regrowth was reasonably high: recovery in S. gracilistyla, S. koreensis, and S. glanduosa was up to 59.3%, 251.3%, and 148.4% respectively, compared with the initial condition.

• Korean Journal of Agricultural Science
• /
• v.30 no.2
• /
• pp.148-153
• /
• 2003

Vegetable soybeans were blanched at 80, 90 and $100^{\circ}C$ for 30, 20 and 10min, respectively. NaCl(3%) was also used to measure the protective effect of soybean color. The color of vegetable soybeans was measured by colorimeter, -a value (greenness) was highest at $100^{\circ}C$-10min. However, the chlorophyll contents was highest at $80^{\circ}C$-30min. NaCl (3%) decreased the loss of chlorophyll in blanched vegetable soybeans. The reaction rate constant for the thermal degradation of chlorophyll and greenness doubled per $10^{\circ}C$. The activation energy chlorophyll a of pod for thermal degradation of chlorophyll a in pods were 138.02 (unsalted), 146.63 (salted) Kcal/mol, respectively.