• 제목/요약/키워드: 재순환 배기

검색결과 239건 처리시간 0.02초

디메틸에테르 연료를 사용하는 3.3리터 디젤기관의 배기성능 개선 (Improvement of Emission Performance in a 3.3 Liter DI Diesel Engine by Using Dimethyl Ether Fuel)

  • 표영덕;이영재;김문헌
    • 한국자동차공학회논문집
    • /
    • 제15권4호
    • /
    • pp.178-185
    • /
    • 2007
  • A study is improvement of power and emission in a inline-pump Dr diesel engine by using Dimethyl ether Fuel. Dimethyl ether (DME) is an oxygenated fuel with a cetane number higher than that of diesel oil. It meets the ULEV emission regulation and reduces the smoke to almost zero when used in a diesel engine. But NOx emission is almost same and CO, THC emissions are lower than that of diesel engine. The emissions aren't satisfied the stronger emission regulation in the further. Generally DOC (Diesel Oxidation Catalyst) is used to reduce CO & THC emissions and EGR (Exhaust Gas Recirculation) system is used to reduce NOx emission. Test results showed that the torque and the power with DME were almost same as those of pure diesel oil, but the brake thermal efficiency increased a little. also the BSEC (Brake Specific Energy Consumption) with DME was similar that of diesel. The test results showed that the DOC was the vary effective method to reduce the CO emission in case of Dimethyl Ether Fuel in diesel engine. But, THC emission is showed a little reduction rates. Also EGR system was the very effective method to reduce the NOx emission in case of Dimethyl Ether Fuel in diesel engine.

과급에 의한 디젤 및 바이오디젤의 저온연소 운전영역 확장에 관한 연구 (Extension of Low Temperature Combustion Regime by Turbocharging Using Diesel and Biodiesel Fuels)

  • 장재훈;오승묵;이용규;이선엽
    • 대한기계학회논문집B
    • /
    • 제36권11호
    • /
    • pp.1065-1072
    • /
    • 2012
  • 바이오디젤 연료는 그 안에 포함된 산소성분으로 인해 압축착화엔진에 사용했을 때 일반디젤 연료보다 더 적은 입자상 물질을 배출한다. 따라서 이 연료를 저온연소 기법에 적용하는 경우 보다 효과적으로 $NO_x$-PM을 동시 저감할 수 있고 그로부터 저온연소 운전영역의 확장을 기대할 수 있다. 이번 연구에서는 일반디젤과 대두유 기반의 바이오디젤 연료를 이용하여 산소농도 5~7%의 Dilution controlled regime에서 저온연소 운전을 구현하고 성능 및 배기 특성을 조사하였다. 엔진 실험 결과로부터 바이오디젤 연료의 경우 디젤에 비해 약 14% 낮은 발열량에도 불구하고 높은 세탄가 및 함산소 성질로 인한 연소효율 증가로 동일 연료량 분사 시 이보다 더 낮은 약 10~12% 정도의 출력이 감소함을 볼 수 있었다. 배기 측면에서도 바이오디젤 내 산소원자가 입자상물질의 산화반응을 촉진하여 최대 90%의 smoke 저감이 가능함을 관찰하였다. 또한 엔진 과급 실험으로부터 과급을 사용하여 저온연소 및 바이오디젤 사용으로 인한 출력 저하를 개선할 수 있음을 확인하였으며 과급과 바이오디젤 연료의 동시 적용을 통해 산소농도 11~12%의 EGR 가스 투입으로도 저온연소에 상응하는 PM-$NO_x$ 동시 저감이 가능함을 보여주었다. 이런 결과는 결국 이와 같은 과급 및 바이오디젤 연료의 적절한 조합으로부터 엔진 출력 향상과 배기특성 개선이 동시에 달성할 수 있고 이로부터 운전영역의 확대가 가능함을 의미한다.

수소-천연가스 혼합연료 엔진의 삼원촉매 전환효율 특성 연구 (A Study on the Characteristic of Conversion Efficiency for Three-way Catalyst in Hydrogen-Natural Gas Blend Fueled Engine)

  • 박철웅;이의형;김창기;이장희
    • 한국가스학회지
    • /
    • 제20권6호
    • /
    • pp.23-30
    • /
    • 2016
  • 천연가스를 이용한 기존 엔진들은 효율이 우수한 희박연소를 구현하였지만 배기가스의 정화성능이 점차 강화되는 배기규제에 대응하기 위해, 이론공연비 연소 방식으로 관심이 옮겨지고 있다. 이론공연비 연소 방식은 유해 배출가스의 정화효율이 높은 삼원촉매를 사용할 수 있는 장점이 있지만, 높은 연소열 발생에 따른 열 내구성 문제와 연비가 해결과제로 남아 있다. 천연가스에 수소를 혼합한 수소-천연가스 혼합연료(HCNG))는 수소의 빠른 연소속도에 의한 영향으로 연소속도가 증가하고, 희박한계가 증가하여 배기가스재순환(Exhaust gas recirculation; EGR) 률의 공급을 증가할 수 있다. EGR률 상승은 연소온도를 낮추게 되어 엔진 열 내구성에 긍정적인 영향을 줄 수 있고, 압축비를 더욱 증가 시킬 수 있어서 효율적인 연소조건을 형성하도록 도움을 줄 수 있다. 본 연구에서는 기존 대형 가스엔진을 이용하여 개발한 이론공연비 연소 방식의 HCNG 엔진의 배출가스 저감을 최소화하기 위해, 삼원촉매를 개발 및 적용하여 배기가스 특성을 평가하고 분석하고자 하였다. 현재 상용화된 시내버스용 삼원촉매와 HCNG용으로 개발 중인 시제 삼원촉매를 각각 설치하여 정상상태 운전조건 및 과도운전조건에서 실험을 진행하고 모드실험 결과를 비교하였다.

EGR Cooler 내부 형상에 따른 Fouling이 냉각 성능에 미치는 영향 (The Effect of Cooling Efficiency on Fouling by EGR Cooler Internal Shape)

  • 남연우;오광철;이천환;이춘범;이원남
    • 한국자동차공학회논문집
    • /
    • 제19권1호
    • /
    • pp.101-108
    • /
    • 2011
  • Understanding the exhaust gas recirculation (EGR) cooler fouling in diesel engine is important factor in the durability characteristic of a EGR system. We develope a test rig and PM feeder using carbon black to examine the effect of fouling on EGR cooler devices those were consisted of flat and shell & tube type. The EGR cooler fouling process is a complex interaction involving heat exchanger shape, boundary condition, constitutes, chemistry and operating mode. As the soot deposited to EGR cooler, these formed a thin deposit layer that was less heat exchange than the fresh status of tube enclosing the exhaust gas, resulting in lower heat exchange effectiveness in both type coolers. But these deposits caused different results in pressure drop, it is increased in flat type, but decreased in Shell & tube type of EGR cooler. A cause was estimated from a change of the flow structure and a decrease of contact area as the EGR cooler fouling.

디젤 예혼합 압축착화 엔진에서 EGR 및 수소농후가스의 영향 (The Effects of EGR and Hydrogen Enriched Gas on Diesel HCCI Engine)

  • 박철웅;조준호;오승묵
    • 한국자동차공학회논문집
    • /
    • 제19권1호
    • /
    • pp.1-8
    • /
    • 2011
  • In recent years, there has been an interest in early-injection diesel engines as it has the potential of achieving a more homogeneous and leaner mixture close to TDC compared to standard diesel engine. The more homogeneous mixture may result in reduced NOx and soot emissions and higher efficiency in homogeneous charge compression ignition engines. While earlier studies have shown that a reduction in NOx emissions from HCCI engine is possible, there are some significant problems including the control of ignition timing and combustion rate. In order to investigate the effect of EGR and hydrogen enriched gas on combustion characteristics and emissions, an experiments with single cylinder CRDi engine were carried out concerning the formation of various premixed charge, which can achieved by early injection, EGR and hydrogen enriched gas. EGR was not effective to further reduce NOx and PM emissions. It was found that NOx emissions were decreased with an introduction of hydrogen enriched gas and an adequate diesel fuel amount.

고온공기를 이용한 제트확산화염의 연소특성에 관한 실험 (Experiment on the Characteristics of Jet Diffusion Flames with High Temperature Air Combustion)

  • 조은성;대야건;소림수소;정석호
    • 대한기계학회논문집B
    • /
    • 제28권3호
    • /
    • pp.359-364
    • /
    • 2004
  • For the development of high efficiency and low emission combustion systems, high temperature air combustion technology has been tested by utilizing preheated air over 1100 K and exhaust gas recirculation. In this system, combustion air is diluted with large amount of recirculated exhaust gases, such that the oxygen concentration is relatively low in the reaction zone, leading to low flame temperature. Since, the temperature fluctuations and sound emissions from the flame are small and flame luminosity is low, the combustion mode is expected to be flameless or mild combustion. Experiment was performed to investigate the turbulent flame structure and NO$_x$ emission characteristics in the high temperature air combustion focused on coflowing jet diffusion flames which has a fundamental structure of many practical combustion systems. The effect of turbulence has also been evaluated by installing perforated plate in the oxidizer inlet nozzle. LPG was used as a fuel. Results showed that even though NO$_x$ emission is sensitive to the combustion air temperature, the present high temperature air combustion system produce low NO$_x$ emission because it is operated in low oxygen concentration condition by the high exhaust gas recirculation.

후처리 시스템을 장착한 디젤엔진의 EGR 밸브 작동에 따른 성능 분석 (Analysis of Performance Characteristics on Diesel Engine with Aftertreatment and EGR System)

  • 박철웅;최영;임기훈
    • 한국자동차공학회논문집
    • /
    • 제18권5호
    • /
    • pp.124-129
    • /
    • 2010
  • The direct injection (DI) diesel engine has become a prime candidate for future transportation needs because of its high thermal efficiency. However, nitrogen oxides (NOx) increase in the local high temperature regions and particulate matter (PM) increases in the diffusion flame region within diesel combustion. Therefore, the demand for developing hybrid system consist of exhaust gas recirculation (EGR) and aftertreatment system as well as diesel particulate filter (DPF) or lean NOx trap (LNT) should be applied. The variation of EGR rate due to the malfunction of EGR valve can affect not only the combustion stability of engine but also the performance of aftertreatment system. In this research, 2.0 liter 4-cylinder turbocharged diesel engine was used to investigate the combustion and emission characteristics for various operating conditions with EGR. While the fuel consumption was increased with increase of EGR rate, NOx emission was improved by maximum 90% at low speed, low load operating condition. To achieve combustion stability and reliability of aftertrearment system with minimum penalty in fuel consumption and emissions, the fault diagnosis of EGR malfunction must be employed.

가솔린 엔진에서 합성가스 첨가량에 따른 EGR 효과에 대한 연구 (A Study on the Effects of EGR with Syngas Addition in a Gasoline Engine)

  • 윤영준;최영;강건용
    • 한국자동차공학회논문집
    • /
    • 제15권6호
    • /
    • pp.159-164
    • /
    • 2007
  • The purpose of this study is to reduce harmful emission gases in the range of stable combustion without loss of a thermal efficiency. Therefore, effects of both exhaust gas recirculation(EGR) and synthetic gas addition on engine performance and emission were investigated in a gasoline engine. Synthetic gas(syngas), which is in general prepared from reforming gasoline, was utilized in order to promote stable combustion. The major components of syngas are H2, CO and $N_2$ gases. The percentage of syngas addition was changed from 0 to 30% in energy fraction and EGR rate was varied up to 30%. As a result, $COV_{IMEP}$ as a parameter of combustion stability was decreased and THC/$NO_X$ emissions were reduced with the increase of syngas addition. And $COV_{IMEP}$ was increased with the increase of EGR but $NO_X$ emission was greatly reduced. In addition, under the region where the EGR rate is around 20%, thermal efficiency was improved.

부분부하에서 커먼레일 과급 디젤엔진의 VGT와 EGR 제어가 배출물에 미치는 영향 (The Effect of Control of the VGT and EGR in a Turbocharged Common-Rail Diesel Engine on Emissions under Partial Loads Conditions)

  • 정수진;정재우;강정호;강우
    • 한국자동차공학회논문집
    • /
    • 제15권6호
    • /
    • pp.151-158
    • /
    • 2007
  • The static and dynamic behaviour of VGT and EGR systems has a significant impact on overall engine performance, fuel economy and exhaust emissions. This is because they define the state and composition of the air charge entering the engine. This work focused on the effect of the aperture ratio of VGT and EGR on the emission and flow characteristics under partial loads conditions. The investigation carried out using 2 liter PCCI 4 cylinder diesel engine with VGT and EGR. The result of this study shows that smoke increases with increasing EGR rate and NOx decreases with increasing EGR rate. It was also found that the residual gas contents greatly impact on soot emission under partial load condition. Finally, it can be concluded that VGT and EGR aperture ratio can greatly impact not only on soot and NOx but also air charging.

HCCI 엔진에서 엔진성능 및 배출에 미치는 EGR의 영향 (A Study on the Effects of EGR on Engine Performance and Emissions of a HCCI(Homogeneous Charge Compression Ignition) Engine)

  • 한성빈;장용훈
    • 대한기계학회논문집B
    • /
    • 제27권11호
    • /
    • pp.1630-1636
    • /
    • 2003
  • Automobile companies and research institutions in leading automobile-manufacturing nations have recently been very active with research regarding the HCCI engine for use in future vehicles. Because HCCI engines take advantage of high compression ratio and heat release rate, they exhibit high efficiency found in compression ignition engines. HCCI engines also utilize a lean air/fuel ratio resulting in low emissions of NO$_{x}$ and PM (particulate matter). The objective of this research is to determine the effects of EGR rate on the combustion processes of HCCI. for this purpose, a 4-cylinder, compression ignition engine was converted into a HCCI engine, and a heating device was installed to raise the temperature of the intake air and also to make it more consistent. In addition, a pressure sensor was inserted into each of the cylinders to investigate the differences in characteristics among the cylinders. The experimental study of the effects of EGR rate on various gas emissions, engine performance, etc. should prove to be a valuable source of information for the development of the HCCI engine.e.