• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.87-91
• /
• 2006

Polysaccharides extracted from mushroom have been most commonly used to enhance the immune system. Also polysaccharides maintaining the moisture extent on epidermal tissue have an effect on the removal of necrotic tissue and the restoration of epidermal tissue through enhancing the immune system at skin layers. In this work, polysaccharides were from Schizophyllum commune studied about the burn and wound healing activity in the epidermal tissue on rats through in vivo experiment and hematological values. And antibacterial activities were examined using pathogenic microorganisms causing the secondary inflammation.

• Journal of the Korean Society of Radiology
• /
• v.10 no.1
• /
• pp.59-64
• /
• 2016

The purpose of this study intend to develop the automatic voice system for language communicating over foreign patients in testing of magnetic resonance imaging. Used sentences for the automatic voice system was selected with twelve sentences and five foreign languages in hospital in use. These translated texts were provided free of charge from Oddcast's website, which is recorded each language-specific voice as Wav files, The recorded audio file were produced by the two types of a power-point show of MS-office 2013(extension; ppsx) form and Web-enabled system using the PHP program to be applied in the mobile phone environment. It is considered to relieve the stress about an language barrier to medical technician and the voice system designed with the variable language will be enhanced the diagnostic information on foreign patients. Because automatic voice system designed for this study can enhance the understanding of test in between korean medical technician and foreign patients, It will be expected to utilize more usefully in clinical practice.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.180-189
• /
• 2012

This study was carried out to suggest an experiment based for selecting Sedum, which can adapt well with heat tolerance in extensive green roof system. The heat tolerance of Sedum subject to laboratory high temperature treatment and heat processing time were evaluated using electrolyte leakage, chlorophyll content and regrowth test, and the relation between soil water content and heat tolerance were researched. Logistic model of nonlinear regression analysis was used to evaluate the lethal temperatures that were predicted with the range of $45.0{\sim}48.1^{\circ}C$(soil water content 5%), $47.5{\sim}49.3^{\circ}C$(10%), $48.6{\sim}52.8^{\circ}C$(15%) in 6-hours high-temperature treatment. The higher the soil water content, the stronger the heat resistance property of Sedum. there is. The higher the treatment temperature, the lower the chlorophyll content, and the less the soil water content, the faster the chlorophyll decomposition. The order of hot-temperature resistance was S. reflexum>S. takevimense>S. middendorffianum>S. album>S. sieboldii>S. spurium when soil water content was 5%. The order of hot-temperature resistance was S. album>S. reflexum>S. spurium>S. takevimense>S. middendorffianum>S. sieboldii when soil water content was 15%. The more of soil water content, S. album, S. reflexum, S. spurium had stronger tolerant of hot temperature. These results were consistent with those from the regrowth test and the heat tolerance tested by electrolyte leakage evaluation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2001

To protect combustion chamber from high temperature combustion gas, regenerative cooling is used for most liquid rocket engine. Although regenerative cooling is the most effective way to protect the chamber from high heat flux, realization of this system requires detail analysis, manufacturing technique and high cost. To demonstrate the possibility of applying regenerative cooling to a real rocket engine, the hot fire test has been carried out for the sub-scale liquid rocket with the water cooling system. The main purpose of the test is to identify the problem area of design, safety and cost effective manufacturing technique. The coolant passage was 3 mm in width and wall thickness was 1 mm with stainless steel. Maximum combustion time and pressure were 60 seconds and 400 psi, respectively. The flow rate of coolant was reduced gradually from 2 kg/s to 0.12 kg/s throughout firing test, combustion chamber was visually examined and no dwfect was observed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.112-117
• /
• 2003

The brazing of copper alloys and duplex stainless steels is an indispensable manufacturing technology for thrust chambers with regenerative cooling. For setting up the optimized brazing conditions, C18200 copper alloy plate with machined cooling channels and S31803 stainless steel plate are brazed with AMS4764 filler metals of which thickness is 50${\mu}m$ and 80${\mu}m$ They are tested by X-ray radiography, strength/leakage and fracture tests, and fracture surface inspection. The results obtained by the suggested conditions are that the specimen brazed with filler metal thickness of 50${\mu}m$ has good strength properties and brazed zone. However, the specimen with filler metal thickness of 80${\mu}m$ has the brazed zone with cooling channel obstruction and enlargement.

• Journal of the Korean Arthroscopy Society
• /
• v.17 no.1
• /
• pp.6-10
• /
• 2013

Purpose: This study intends to verify the usefulness of magnetic resonance imaging (MRI) for estimate recovery after arthroscopic pull-out repair at root tears of medial meniscus. Materials and Methods: We performed 17 patients who examined MRI and arthroscopy among patients who had received repair of medial meniscus from November, 2007 to June, 2011. To determine restoration meniscus, we performed arthroscopy and MRI. Results: Lysholm knee scores before and after operation were average 56.4 and 79.0 and visual analogue scale (VAS) score was improved from 8 points to 3 points. From secondary look arthroscopy performed after operation, 17 cases showed stabilization after regeneration. However, In MRI, cleft sign implying root tears of medial meniscus was observed in all cases before and after operation, ghost sign was observed in 10 cases and 9 cases respectively, radial linear defect was showed 17 cases and 15 cases respectively. Conclusion: It was not useful that MRI after medial meniscus repair in non-anatomical site, to consider restoration of medial meniscus. To evaluate for recovery medial meniscus after repair more exactly, secondary arthroscopy would be required.

• Journal of Periodontal and Implant Science
• /
• v.35 no.4
• /
• pp.949-959
• /
• 2005

이 연구는 임플란트를 식립하기를 원하는 전신건강상태가 양호하며 구강위생상태가 좋은 14명 환자(남자:8명, 여자:6명, 평균나이 : 44세)의 20개의 발치와 내에 흡수성 차폐막(BioMesh. Sam Yang Corporation, Korea)과 함께 탈회냉동 건조동종 골(dem-ineralized freezedried bone allografts, $250-500{\mu}m$. Pacific Coast Tissue Bank, U.S.A.)과 이종골(Bovine-Bone, Bio-Oss 0.25-1.0 mm, Geistlich, Biomaterials and Osteohealth, Switzerland)을 1:1(부피)로 혼합하여 이식한 후 그 치유양상을 관찰하고자 조직학적 및 면역조직화학적으로 평가하였다. 이직재가 탈락되는 것을 방지하기 위하여 발치한 후 1개윌이 경과된 후에 이식재와 차폐막을 위치시켰다. 표본제작을 위하여 이식술을 시행한 지 약 6개윌 후에 임플란트를 식립하기 직전 식립부위에서 trephine bur로 골을 채취하였는데, 20증례 중 7증례에서 임플란트를 식립하기 전에 차폐막이 노출되었다. 차폐막이 노출되지 않은 것을 대조군으로, 노출된 것을 실험군으로 설정하였다. 조직학적인 관찰을 위하여 통상적인 방법에 따라 탈회 표본을 제작하였고, alkaline phosphotase(ALP)틀 이용하여 면역조직화학적 염색을 시행한 후 골 형성 상태를 평가하여 다음과 같은 결과를 얻었다. 본 연구에서는 발치와내에서 골유도재생술 후 나타나는 치유 형태를 5가지 형태로 분류할 수 있었다. Type I, II와 III는 새로운 골 형성을 나타내지 않았고, 면역조직화학적 검사 시 ALP 음성 소견을 나타내었다. Type V는 새로운 골 형성과 ALP 양성 소견을 나타내었으나 염증, 괴사, 결합조직의 증식 등은 없었다. Type IV와 Type V의 차이는 결합조직의 증식여부로 구분되었다. 막이 노출되지않은 증례들 중 7 증례에서는 Type V의 치유 형태를, 2증례에서는 Type IV의 치유 형태를 나타내었다. 막이 노출되었던 증례에서는 Type I, II, III의 다양한 치유 형태를 나타내었다. 본 연구결과, 발치와 내에 골유도재생술을 시행한 후 차폐막의 노출 여부가 신생골 형성에 중요한 영향을 미칠 것으로 사료되며, 본 연구에서 분류한 치유 형태가 향후 골유도재생술 후의 결과 분석에 활용될 수 있을 것으로 사료된다.

• Journal of Chest Surgery
• /
• v.29 no.11
• /
• pp.1182-1190
• /
• 1996

The best treatment of congenital or acquired tracheal stenosis is resection and end to end anastomosis. Various prosthetic material and tissue graft replacement can be considered when the stenotic segment is too long, but their uses are still limited due to many serious complications. The present study examined the effect of immunosuppression and cryopreserved allograft trachea after intraperitoneal omental implantation for evaluation of the possibility of tracheal transplantation. Thirty tracheal segments were harvested from fifteen donor Wistar rats. Among them eighteen segments were implanted immediately(group I, II, III) and twelve segments were used for cryopreservation(group IV, V). Heterotopical intraperitoneal implantation was performed in five groups of rats(n=6); Group I was Wistar syngeneic controls and received no immunosuppression. Group II and III were those of Sprague-Dawley recipients, the former receiving no immunosuppression and the latter receiving immunosuppression(Cyclosporin A 15mg/kg/day, Methylprednisolone 2mg/kg/day). Group IV and V were groups of Sprague-Dawley recipients, the former receiving immunosuppression and the latter receiving no Immunosuppression. After 28 days, rats were sacrificed and the tracheal segments were histologically evaluated. Epithelial thickness was significantly decreased in group II, IV. Epithelial regeneration score was also significantly decreased in II. All rats maintained well their round tracheal contour. In conclusion; I) trachea could be preserved for a long time with cryo method, 2) epithelium could regenerate fully with omentopexy in cryopreserved trachea, 3) immunosuppresion was not necessary with cryopreserved trachea.

• Journal of Chest Surgery
• /
• v.41 no.2
• /
• pp.160-169
• /
• 2008

Bakcground: To treat anastomosis site stenosis and occlusion of the artificial vessels used in vascular surgery, tissue-engineered artificial vessels using autologous cells have been constructed. We developed artificial vessels using a polymer scaffold and autologous bone marrow cells and performed an in vivo evaluation. Material and Method: We manufactured a vascular scaffold using biodegradable PLCL (poly lactide-co-${\varepsilon}$-caprolactone) and PGA (poly glycolic acid) fibers. Then we seeded autologous bone marrow cells onto the scaffold. After implantation of the artificial vessel into the abdominal aorta, we performed an angiography 3 weeks after surgery. After the dogs were euthanized we retrieved the artificial vessels and performed histological analysis. Result: Among the six dogs, 2 dogs died of massive bleeding due to a crack in the vascular scaffold 10 days after the operation. The remaining four dogs lived for 3 weeks after the operation. In these dogs. the angiography revealed no stenosis or occlusion at 3 weeks after the operation. Gross examination revealed small thrombi on the inner surface of the vessels and the histological analysis showed three layers of vessel structure similar to the native vessel. Immunohistochemical analysis demonstrated regeneration of the endothelial and smooth muscle cell layers. Conclusion: A tissue engineered vascular graft was manufactured using a polymer scaffold and autologous bone marrow cells that had a structure similar to that of the native artery. Further research is needed to determine how to accommodate the aortic pressure.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.1074-1082
• /
• 1998

In one VTR(Video Tape Recorder), two or more heads are used to record or reproduce video signals. To obtain a uniform quality of a VTR, video heads should have similar characteristics such as geometrical shapes and electro-magnetic performances. This research is aimed to develop a visual inspection system measuring four geometrical parameters;H0,H1,Tw and CW. To obtain a high reliable results, image processing algorithms were developed. A series of experiments was performed for one thousands of video heads. From observation of the experimental results, the system is found to show excellent performance for inspection of video heads.