• Journal of Internet of Things and Convergence
• /
• v.8 no.1
• /
• pp.53-58
• /
• 2022

Smoothing is a transmission plan that converts video data stored at a variable bit rate into a constant bit rate. In the study of [6-7], when a data rate increase is required, the frame with the smallest increase is set as the start frame of the next transmission rate section, when a data tate decrease is required. the frame with the largest decrease is set as the start frame of the next transmission rate section, And the smoothing algorithm was proposed and performance was evaluated in an environment where network traffic is not considered. In this paper, the smoothing algorithm of [6-7] evaluates the adaptive CBA algorithm and performance with minimum frame rate, average frame rate, and frame rate variation from 512KB to 32MB with E.T 90 video data in an environment that considers network traffic. As a result of comparison, the smoothing algorithm of [6-7] showed superiority in the comparison of the minimum refresh rate.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.176-182
• /
• 2023

Plant regeneration protocols for adventitious shoot organogenesis from apple (Malus domestica 'Fuji') leaf explants were developed in the present study. The effects of dark incubation periods in the early stages of culture, pre-treatment methods, the number of explants per culture container, the type of culture containers, and the orientation of the explants on culture media were evaluated to determine the optimal shoot regeneration conditions for 'Fuji' apple leaf explants. Light incubation of explants produced minimal response. However, dark incubation of explants for 4 weeks during the initial culture period enhanced shoot regeneration frequency. Comparing the number of explants per container, a higher percentage of shoot regeneration was obtained with nine explants per container compared with four explants per container. Pre-treatment, before culture, by dipping explants in a liquid regeneration medium containing 40 g/L of sorbitol for 2 hours produced the highest shoot formation rate, and the time of shoot formation was accelerated. The percentage of shoot regeneration and number of shoots per regenerating explant reached a maximum of 87.5% and 4.7, respectively. The regenerated shoots were elongated and rooted on a rooting medium of 1/4 MS with 0.2 mg/L IBA. The plantlets were successfully acclimatized, and the regenerated plants produced normal phenotypes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.83-86
• /
• 2008

정부는 2006년 8월 기존의 발전차액 지원제도를 개정하여 발전차액 기준가격 지원대상 확대, 적용기간의 15년 단일화, 수력, 바이오에너지는 고정요금과 변동요금 중에서 선택할 수 있는 선택권 부여, 기술발전에 따라 태양광, 풍력, 연료전지는2-3년간의 유예기간 이후 매년 감소율을 적용하여 기준가격을 낮추는 등 많은 제도개선 내용을 반영하였다. 2006년 10월부터 개정된 발전차액 지원제도가 시행된 이후 태양광, 풍력의 신규진입이 대폭 증가하였고 수력, LFG, 바이오가스는 대부분 변동요금을 신청하였으며 2007년 집행된 신재생에너지 발전차액 기반기금의 55% 이상이 태양광발전에 지급되는 편중현상의 영향이 나타났다. 따라서 변동요금 설계시보다 SMP 평균이 22원 이상 높아져 변동요금의 재설계, 태양광 발전의 기반기금규모가 55% 이상을 점유하고 있으며 향후 더욱 심화될 예정이므로 특정전원의 기반기금 점유비중 제한 및 최근 수년간 준공된 신재생에너지의 운영실적을 분석하고 법적요건을 상세히 검토하여 투자비, 운영비, 이용률등을 재조정하여 기준가격을 합리적으로 개정하여 제2의 신재생에너지 도약기를 마련해야 할 것이다.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.116-128
• /
• 2022

Purpose: The paper aims to: 1) identify the reasons for the low usage of recycled paper in domestic workplaces and the premature state of recycled paper industry; 2) assess the environmental effects of replacing domestically consumed copy papers with recycled papers; and 3) suggest ways in which the recycled paper industry can expand in South Korea. Method: Questionnaire survey with cluster sampling is used to identify the attitudes and behavior with respect to recycled copy paper, the results of which are analyzed using SPSS. The environmental effect of replacing copy papers with recycled paper is assessed through the Life Cycle Assessment approach and Paper Calculator V4.0. Result: While the respondent's experience in using recycled copy paper was relatively low, they tend to acknowledge the need for its use and show relatively high satisfaction with the quality of the recycled paper. The environmental benefits of replacing ordinary copy paper with 40%+ recycled paper under the 10% market share increase scenario amounts to 60,000 tons of CO₂ emissions reductions. Conclusion: The results from the attitude survey and market research, five approaches to improving the recycled copy paper market are suggested.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.453-465
• /
• 2000

The purpose of this study was to investigate the change of mechanical properties, surface topography and frictional force of various nickel titanium wires after recycling. Three types of nickel-titanium wires and one type of stainless steel wire were divided to three groups: as-received condition(T0:control group), treated in artificial saliva for four weeks(T1) and autoclaved after being treated in artificial saliva(T2). Some changes were observed for the selected mechanical properties in tensile test, surface topography by means of SEM and 3D profilogram, and frictional coefficient. The findings suggest that: 1. Nickel-titanium wires demonstrated no statistically significant differences in maximum tensile strength, elongation rate and modulus of elasticity, but stainless steel wire demonstrated statistically significant differences in maximum tensile strength, elongation rate and modulus of elasticity between the groups(p<0.05). 2. NiTi, Optimalloy, Stainless Steel wires demonstrated increased pitting and corrosion in SEM finding. 3. Recycled NiTi, Optimalloy and stainless steel wires demonstrated significantly greater surface roughness(Ra and Rq) through 3D profilogram when compared with the control wires(p<0.05), but Sentalloy didn't demonstrate significant difference. 4. Recycled NiTi, Optimalloy and stainless steel wires demonstrated significantly greater maximum frictional coefficient when compared with the control wires(p<0.05), but Sentalloy didn't demonstrate significant difference The changes of surface roughness and frictional coefficient in NiTi and Optimalloy had no clinical implication. Consequently recycled nickel titanium wires demonstrated no clinical problem in tensile properties, surface topography and frictional coefficient.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.108-108
• /
• 2011

공동주택에서 2025년 정부가 추진하고 있는 Zero Energy 건축물 구현과 친환경에 대한 탄소배출 저감 문제로 재생에너지 생산시스템의 추가 적용은 반드시 필요하다. 따라서 공동주택 적용 및 활용성을 높일 수 있는 BIPV시스템 개발을 통하여 설치면적 확보와 세대 활용성을 높일 수 있도록 하는 것이 필요하다. 특히 거실 창호의 경우 주방향이 남향, 남동 또는 남서향으로 배치되어 태양광을 적용하기에 적합한 특성을 가지고 있다. 그러나 창호는 건물외피의 역할과 재실자가 조망과 정보취득을 얻을 수 있는 중요한 통로가 되기 때문에 단열 문제나 시야 차폐의 문제는 발생하지는 않도록 하는 것이 필요하다. 본 연구에서는 a-si타입 모듈 2개를 10% 투과율로 Bsck Coating 색상을 달리한 모듈과 c-si BIPV 모듈을 커튼월 창호시스템으로 개발, 일반 2중 창호시스템과 비교 평가를 위해 실제 Test bed 건물에 시공하여 시환경 및 실내 창측면 온도변화 측정 분석을 진행하였다. 현재 국내외 출시되고 있는 a-si see through 모듈은 10~30%의 투과율로 창 마감재로 대체가 가능하나 건축 환경(시환경,열환경)에 대한 분석은 전무한 상태이다. 본 연구에서는 시환경과 창유리면의 열 부하, 자외선, 적외선 차폐 및 가시광선의 투과율에 대한 평가와 Back Coating에 따른 색온도 평가를 통해서 a-si BIPV의 공동주택 세대 발코니 창호 적합성에 대한 검토를 진행하였다. 연구결과는 아래와 같다. ${\bullet}$ 실내조도는 청천공 정오기준 가시성 확보 모듈의 경우 2,300 ~ 3,500lx를 나타내고 있어 대비 현상이나 창측의 급격한 조도 변화가 적은 시환경 구축이 가능 ${\bullet}$ 12시경 휘도는 창측면, 실내 벽체, 코너 바닥면을 대상으로 a-si BIPV 모듈을 적용한 경우 휘도비가 12:1로 KS나 IESNA의 광원과 근접면의 비 20:1 범위에 모두 존재, 적합한 것으로 분석되었으나 c-si의 경우는 그림자로 인한 대비 현상이 발생, 작업 시환경 문제 발생. ${\bullet}$ 이중시스템 창호와 비교하여 단열 성능 떨어짐. 발전시간대 창유리 면 온도 상승 으로 하절기 냉방부하 증가. ${\bullet}$ 자외선은 100% 가까이 차단, 적외선은 13~42%만 투과되고 가시광선은 13% 투과율을 나타내어 일반 창에 칼라 코팅을 적용하는 것과 유사한 경향을 나타냄.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.574-581
• /
• 2008

The optimum regeneration conditions for the regeneration of three way spent catalysts (TWCs), which were taken from automobiles with different driving conditions, were investigated to evaluate the suitability as alternative catalysts for removing VOCs. The spent catalysts were washed with five different acids ($HNO_3$, $H_2SO_4$, $C_2H_2O_4$, $C_6H_8O_7$, and $H_3PO_4$) to remove contaminants and examine the optimum conditions for recovering the catalytic activity. The physicochemical properties of spent and its regenerated TWCs were evaluated by using nitrogen adsorption-desorption isotherms, XRD, and ICP. The relative atomic ratios of contaminants and platinum group metals (PGMs) of the spent TWCs were greatly dependent on the placed positions. The main contaminants formed were lubricant oil additives and metallic components. Also, the regeneration treatment increased the PGMs ratio, BET surface area, and average pore diameter of TWCs. The catalytic activity results indicated that the spent TWCs have the possibility for removing VOCs. Moreover, the employed acid treatments greatly enhanced the catalytic activity of the spent TWCs. Especially, nitric and oxalic acids provided the most improvement in the catalytic behavior. The catalytic activities of the regenerated TWCs were significantly influenced by the containing platinum ratios rather than the removal ratios of contaminants and the changes in the structural properties offered by the acid treatments.

• Korean Journal of Weed Science
• /
• v.14 no.3
• /
• pp.171-175
• /
• 1994

Physiological changes in Eleocharis kuroguwai Ohwi as affected by bensulfuron-methyl {Methyl 2-[[[[[(4, 6-dimethoxy-2-pyrimidinyl)amino]carbonyl]amino] sulfonyl]methyl]benzoate} was determined to relate the characteristics with regrowth behavior. There were no changes in relative growth rate(RGR) during the period of growth cessation after application of bensulfuron-methyl. RGR's of the growth ceseased plants caused at 39 and 51 g/ha began to increase in between 25 and 30 days after application (DAA) and between 30 and 35 DAA, respectively. In untreated plant tuber carbohydrate rapidly decreased right after emergence and almost consumed within 40 days. There was no carbohydrate consumption during the period of growth cessation in bensulfuron-methyl-applied plant, but the content started to rapidly decrease with regrowth. Tuber viability lasted for 30 days in untreated plant, while tubers were viable for 60 and 70 days after application of bensulfuron-methyl at 39 and 51 g/ha, respectively. During the period of growth cessation the plants kept minimum respiration and photosynthesis, but with regrowth respiration and photosynthesis were resumed and rapidly increased.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.106.1-106.1
• /
• 2010

본 연구는 팜 부산물로부터 바이오 에탄올을 생산하는 전처리-당화-발효 공정의 첫 번째 단계인 전처리 공정에서 팜 부산물을 NaOH를 이용하여 효율적으로 전처리하고자 하였다. 암모니아 침지법과 NaOH 침출법을 비교한 결과 팜 부산물에 대해서는 암모니아 침지에 의한 탈리그닌 효과가 적으며 NaOH 전처리가 적합한 방법임을 알 수 있었다. 40-100 mesh 크기의 팜 부산물을 이용하여 반응온도(110, 130, $150^{\circ}C$), 반응시간(20, 40, 60분) 및 NaOH 농도(5%, 11%)의 변화에 따른 팜 부산물의 탈리그닌율과 글루코스 및 자일로스 회수율 간의 상호관계를 확인하였다. $150^{\circ}C$까지의 온도 조건에서 온도에 의한 자일로스의 분해는 일어나지 않는 것으로 확인되었다. 팜 부산물의 탈리그닌율은 시간이 증가할수록 증가하였으며, 높은 NaOH 농도에서 더 높은 것으로 나타났다. 그러나 글루코스 및 자일로스의 회수율은 높은 농도에서 낮게 나타났으며, 시간이 지날수록 감소하여 손실이 많은 것으로 나타났다. 따라서 NaOH 농도가 낮을수록 당 회수율은 높게 나타나지만, 탈리그닌율이 낮아 당화 효율이 떨어지므로 효소 당화 후에 최종 당 회수율이 높은 NaOH 농도 조건을 결정하여야 하겠다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1241-1248
• /
• 1998

The multicast scheme can improve the efficiency of multimedia retrieval service system, assuming that video transmission speed is faster than the playback rate and the store-and-play scheme. To best exploit the multicast benefits under bandwidth heterogeneous environment, we develop a multicast scheduling algorithm called MTS(Maximum Throughput Scheduling) which tries to maximize the amount of information transferred at each scheduling with subgrouping method. The MTS method compromises the multiple unicast method and the multicast method with lowest transmission rate. we compare the performance of MTS with that of MMS(Most Multicasting Scheduling) and EDS(Earliest Deadine Scheduling) via computer simulation. The performance results show that the MTS requires less number of service handlers to service the same number of subscribers.