• 제목/요약/키워드: 재생수지

검색결과 121건 처리시간 0.034초

에폭시/Graphite계 Bipolar Plate의 전기적, 물리적 성질에 미치는 Carbon Fiber의 영향 (Effect of Carbon Fiber on Electrical and Mechanical Properties of Epoxy/Graphite Bipolar Plate)

  • 최범철;이재영;이지정;박윤경;이홍기
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 춘계학술대회 초록집
    • /
    • pp.92.1-92.1
    • /
    • 2011
  • 고분자 전해질 연료전지 (PEMFC)의 핵심 부품 중의 하나인 Bipolar Plate (분리판)을 제조하기 위해서 고분자/그라파이트 복합재료를 사용하였다. 고분자 매트릭스로는 경화시 뛰어난 화학적, 기계적 특성을 갖는 에폭시를 채택하였고, 전기 전도성을 부여하기 위해 그라파이트를 도입하였으며, 에폭시 수지의 내충격성을 향상시키기 위해서 Carbon Fiber를 채택하였다. 에폭시 분말과 그라파이트 분말, 그리고 1cm 정도의 길이를 갖는 Carbon Fiber을 믹서에 넣고 균일하게 혼합하였다. 이 혼합물을 이형제 처리된 몰드에 주입하고, Hot Press를 사용하여 가열, 가압 ($150^{\circ}C$, 4 ton/$cm^2$, 2시간)하면서 경화시켰다. 일정 비율로 고정된 에폭시/그라파이트 계에 Carbon Filber의 혼합 비율을 변화시키면서 전기적, 물리적 성질의 변화를 연구하였다.

  • PDF

불포화폴리에스터 수지와 재생골재를 이용한 재생 폴리머 콘크리트의 강도 및 내구 특성 (Strength and Durability Properties of Recycled Polymer Concrete Using Unsaturated Polyester Resin and Recycled Aggregates)

  • 김영익;성찬용
    • 한국농공학회논문집
    • /
    • 제51권6호
    • /
    • pp.97-103
    • /
    • 2009
  • This study was performed to evaluate the strength and durability properties of recycled polymer concrete using unsaturated polyester resin and recycled aggregates. Unsaturated polyester resin, natural and recycled aggregates and fly ash were used. The mix proportions were determined to satisfy the requirement for the workability and slump according to aggregate sizes (5-10 and 5-25 mm) and unit binder contents (10% and 12%). Tests for the compressive and flexural strength, freezing and thawing and durability for 20% sulfuric solution were performed. The compressive and flexural strength of recycled polymer concrete were in the range of 85~97 MPa and 17.9~20.8 MPa, respectively. The strengths of recycled polymer concrete using recycled aggregate have similar or slightly decreased compared to polymer concrete using natural aggregate. After 300 cycles of freezing and thawing, weight decrease ratio and durability factor of recycled polymer concrete were in the range of 0.13~1.42% and 94~99, respectively.

화학적 박리방법과 ESPI에 의한 재생된 폴리올레핀 범퍼수지의 물성평가 (Characterization of Polyolefin Bumper Recycled by Chemical Removal Method using Electronic Speckle Pattern Interferometry)

  • 김현경;강기수;김경석;홍진후
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.295-298
    • /
    • 1997
  • Recycl ing of PP/EPR based bumper coated with polyester urethane paint has been per formed by chemical decoating method. Electronic Speckle Pattern Interferometry (ESP11 has been applied to characterize the deformation of polyolef in based bumper. In additon, physical properties and processability of recycled materials have been investigated by dynamic mechanical thermal analysis, impact test and melt flower index measurement. The results show that the deformation ratio of recycled material is higher than that of virgin one. The morphological change of EPR, degree of distribution and dispersion during the recycling process seem to be the most important factor for the deformation and the mechanical properties of recycled materials. The experimental results obtained show that ESPI is very powerful technique to study the thermal mechanical property of polyolefin bumper system.

  • PDF

고분자 전해질 연료전지용 복합수지 분리판 개발 (Development of Composite Bipolar Plate for PEMFC)

  • 강현민;한인수;임찬
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 추계학술대회 논문집
    • /
    • pp.5-7
    • /
    • 2007
  • Graphite/polymer composite bipolar plates for PEMFC are successfully developed, and their typical properties are superior to commercially available ones. Thermal property of the developed bipolar plate was evaluated by dynamic mechanical analyzer, and the results were compared to commercial ones. The specimens were immersed into the deionized water bath at $80^{\circ}C$ for 1500hrs to evaluate dimensional stability and durability. Dimension, weight of the specimens as well as extraction conductivity was measured as each 500hrs. Fully molded bipolar plates without any machining or milling were also prepared using a specially developed mold, and they were applied to the fuel cell performance test. Results were compared to the machined commercial bipolar plate.

  • PDF

폐목재파티클을 이용한 재생보드의 제조특성 (Manufacturing Characteristics of Boards Recycling Waste Wood Particle)

  • 김외정;서진석;한태형;박종영
    • 한국건설순환자원학회논문집
    • /
    • 제2권1호
    • /
    • pp.120-127
    • /
    • 2006
  • 폐목질원료로서, 제재, 합판, PB, MDF와 폐침목 등의 해머밀에 의한 파쇄특성과 재생파티클 종류와 혼합비율에 따른 재생보드의 물성을 구명함으로써, 보드원료로서 재자원화 하는 방안을 모색해 보고자 하였다. 그 결과, 재생보드의 휨성질은 목질원료의 입자형태 및 입도분포에 크게 영향을 받으며, 파티클, 섬유와 같은 element가 압축고화된 상태의 판넬(PB, MDF)로부터 재생한 파티클은 물성저하를 초래하였다. 그러나, 재생파티클에 이미 도포 경화된 수지에 의해 재생보드의 치수안정성이 향상되는 효과가 있다. 따라서, 보드원료로서의 적합한 요건은 건전폐목재(제재, 합판)와 저급폐목재(PB, MDF)의 적정한 혼용에 있다고 할 수 있다. 본 연구에서는 건전폐목재 재생파티클과 재생 PB파티클의 혼용시험에서 제재파티클이 휨성질(MOR, MOE)과 박리강도에 기여하고, 합판파티클은 치수안정성에 더욱 기여하는 경향을 나타냈다. 또한 보드의 중층용 원료로 재생PB파티클의 혼합비율을 증가함에 따라서 보드의 휨성능이 감소되는 경향을 나타냈지만 혼합률 40%까지는 유의차가 없이 보드 15형(MOR : $153kgf/cm^2$, MOE : $27.5tonf/cm^2$) 수준의 성능이 구비되었다. 향후 생활폐목재(폐가구 등)와 같은 저급폐목재의 활용방안이 강구된다면 보드원료의 수급에 한층 기여할 수 있을 것이다.

  • PDF

PE/PP Blend형 fiber/Filler 보강 복합 성형체

  • 강영구;조명호
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 2002년도 추계 학술논문발표회 논문집
    • /
    • pp.166-171
    • /
    • 2002
  • 폐자원의 재활용은 현재 미래산업을 발전시키는데 중요한 변수로 작용하고 있으며, 폐플라스틱의 경우 통신 케이블 덕트, 고속전철용 케이블 덕트, 선박용 구조체등 고부가가치 제품으로의 기술개발이 활발히 진행되고 있다. 폐 Polyolefin 계열의 수지는 성형가공이 적절한 MFI(Melt flow index)와 뛰어난 기계적 물성, 가공 성형성 등으로 인해 다양한 형태와 용도로 recycling되고 있으나, 재생시 다수 Grade에 의한 분별, 분리수거의 어려움, 상용성결여, 난연성 부재 그리고 70% 대의 기계적 물성 회복율로 인해 그 용도가 제한되고 있는 실정이다.(중략)

  • PDF

2005 전남대학교 줄기세포 심포지움 개최 후기

  • 한호재
    • 대한수의사회지
    • /
    • 제41권10호
    • /
    • pp.918-928
    • /
    • 2005
  • 체세포 핵이식을 통한 정상인과 환자 체세포 유래의 다능성 인간배아 줄기세포주 확립 및 응용 - 체세포 핵이식을 통한 다능성 인간 배아 줄기세포주 확립의 기술적 측면 - 인간배아줄기세포의 분화 : 발생생물학적 접근 및 세포치료에 대한 전망 - 마우스 배아줄기세포 기능들의 호르몬 조절 - 간엽줄기세포를 이용한 골조직 공학 - 조혈모세포의 재생 - 제대혈 유래 간엽줄기세포를 이용한 세포치료 - 난치성 혈액종양질환에서 수지상세포를 이용한 세포면역치료법 확립

  • PDF

페암면 재생패널의 제조 및 특성

  • 조명호;강영구
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 2001년도 공동학술대회
    • /
    • pp.343-346
    • /
    • 2001
  • 경량 건축소재는 건축자재의 경량화, 고급화 및 다양화 등의 기능성 건축소재로의 역할을 요구하고 있으며 그 중 대표적인 것으로는 polyurethane foam이 있다. 일반적인 플라스틱 foam의 경량 건축소재는 난연성에 대한 문제점과 첨가제에 의한 중량 증가, 화재발생시 과다연기발생 등의 문제점이 있으며 저밀도 콘크리트 등의 무기소재는 flexibility가 떨어져 충격과 휭강도가 매우 낮은 단점을 가지고 있다./sup 1.2)/ 열경화성 수지인 polyurethane도 난연성과 강도에 대한 단점을 가지고 있어 sodium silicate 혼합에 의한 난연성을 향상시킬 수 있으나/sup 3)/ 국내 난연 3급의 규격에도 미치지 못하는 특성을 가지고 있다.(중략)

  • PDF

특집 : 극한환경재료기술 - 극저온에서의 고분자 복합재료 기술 현황

  • 엄문광;이진우;이원오
    • 기계와재료
    • /
    • 제21권4호
    • /
    • pp.48-55
    • /
    • 2010
  • 극저온에서 고분자 복합재료는 열전도도가 낮아 단열 특성이 탁월하고 전기절연성이 뛰어나 에너지 산업, 전기 및 전자산업, 생물공학, 의료분야, 수송산업, 우주 항공 산업 등 응용 범위가 매우 광범위하고, 산업 규모 또한 지속적으로 성장하고 있다. 향후 신재생 에너지의 저장 및 수송용으로 열전도도가 낮은 고분자 복합재에 대한 수요가 크게 증가할 것으로 예상된다. 따라서 본 고에서는 고분자 복합재료의 극저온 응용에 관한 국내외 기술동향과 수지 및 복합재 물성, 극저온에서의 특성 평가 기술 등에 대하여 소개하였다.

  • PDF

고려 수지침 요법의 항바이라스 및 세포재생 효과에 대한 탐색 (Exploration of Antiviral and Cell Regeneration Effects of the Korean Hand Acupuncture(Koryo Sooji Chim) Therapy)

  • 이형환
    • 한국자연치유학회지
    • /
    • 제12권1호
    • /
    • pp.31-34
    • /
    • 2023
  • 배경: 고려수지침을 이용한 항바이러스성 치료에 관한 연구는 전혀 없는 상태이다. 목적: Herpesvirus-2에 감염된 환자에 대한 수지침 자극에 대한 효과를 관찰하는 것이 목적이었다. 방법: 환자에 대한 수지침의 자극은 압봉 1호와 지압봉을 이용하여 수지 혈 자리에 부착하고, 5일간을 지나서 환부의 변화를 관찰하였다. 결과: 대상자 3명에 수지침혈 자리에 자극하면서 매일 관찰한 결과 20대의 환자는 3일째, 50대는 4일째, 그리고 70대는 5일째에 완치가 되었다. 결론: 수지침 자극으로 바이러스 감염으로 파괴된 세포가 재생되었고, 세포 내의 바이러스의 증식도 사라졌다. 수지침을 이용한 항바이러스성 치료가 유효하다는 것을 의미한다.