• Title/Summary/Keyword: 재생가능률

Search Result 89, Processing Time 0.034 seconds

A Study on The Radar QPE Improvement Technique Using Rapid RHI Volume Scan (RHI 볼륨자료를 이용한 레이더 QPE 정확도 향상 기법 연구)

  • Hwang, Seok Hwan;Oh, Byung Hwa;Cho, Hyo Seob;Lee, Dong Ryul
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.18-18
    • /
    • 2016
  • 최근 지구온난화의 영향으로 수 십분 만에 위험상황에 도달하는 돌발성 도시 집중호우가 빈발하고 이로 인한 피해가 급증하면서 기존 지상우량계 및 대형레이더 기반 도시홍수 관측체계에 대한 보완이 필요하게 되었다. 빠르고 정확한 도시홍수의 예측 및 예보를 위해서는 대형레이더 관측범위 이하의 빠른 저고도 관측이 필수이다. 이의 일환으로 우리나라에서도 소형 이중편파 X밴드 레이더를 도입하기 시작하였고 활용에 대한 연구가 시작단계에 있다. 일반적으로 소형레이더의 경우 빠른 운용이 가능하고 집중호우 관측과 같은 특정 목적에서 운영하기 때문에 도시 돌발홍수 예보를 위한 충분한 시간해상도의 자료 생산이 가능하다. 그러나 소형레이더를 이용하여 관측하더라도 고층 아파트나 빌딩이 밀집되어 있는 우리나라 도심 환경에서 관측반경내 전반에 대한 1km 이하 저고도 관측은 물리적으로 매우 어려운 현실이다. 따라서 본 연구에서는 한국건설기술연구원의 X밴드 이중편파 레이더로 관측된 다수의 연직 관측자료를 활용하여 호우의 연직 분포를 3차원으로 재생성한 후 이의 평균 단면 추세를 이용하여 관측고도 이하의 관측치를 추정하는 기법을 개발하였다. 기법의 적합성 평가를 위해 2013년, 2014년 주요 호우 사상에 대해 적용하였고, 검토결과 본 방법을 적용한 경우의 QPE가 기존 관측고도각을 이용한 QPE에 비해 정확도가 향상되는 것으로 나타났다.

  • PDF

Identification of Regenerable Cells in MesophyII Protoplast Cultures (엽조직에서 나출된 원형질체의 재생 가능 세포판별)

  • 소인섭;유장걸
    • Korean Journal of Plant Tissue Culture
    • /
    • v.21 no.1
    • /
    • pp.23-28
    • /
    • 1994
  • This study was rimed out to examine the difference in the cell vitality between mesophyII protoplast (MP) and paraveinal mesophyII protoplast (PVMP) of Nicotiana tabaccum 'Xanti', Petunia hybrida 'Blue Star' and Chrysanthemum morifolium 'Baeckwang' by using urea permeability technique. The effects of various enzyme solutions and incubation time, NAA and thidiazron on plant regeneration from isolated protoplasts were also investigated. The vibratome technique was used for protoplast isolation and urea permeability test because the fresh living, thin tissue stripes (50 ${\mu}{\textrm}{m}$ of thickness) could be obtained with minimal damage with the vibratome. For the three plants examined, the urea permeability on the tested tissue stripes was relatively higher in PVMP than in MP by about Ks = 2.0 $\times$ 10$^{-5}$ cm/sec. The treatment of an enzyme mixture of 1.5% cellulase R-10, 1% Driselase, 0.5% Macerozyme R-10, and 0.5% Pectinase for 4 to 8 h was effective on the isolation of PVMP. The highest frequency of callus formation and plant regeneration from the isolated protoplasts was obtained with NAA 2 mg/L and thidiazuron 0.01 mg/L. Furthermore, the results demonstrated that cell devision and plantlet regeneration was more frequent in the PVMP than in the MP of the same leaf or plant We, therefore, conclude that UM is an excellent experimental material for the callus formation and regeneration from isolated protoplasts.

  • PDF

Energy Consumption of Biodiesel Production Process by Supercritical and Immobilized Lipase Method (초임계와 Lipase 고정화에 의한 바이오디젤 생산 공정의 에너지소비량)

  • Min, Eung-Jae;Lee, Euy-Soo
    • Korean Chemical Engineering Research
    • /
    • v.50 no.2
    • /
    • pp.257-263
    • /
    • 2012
  • Biodiesel is a renewable energy which is nontoxic and acting as a replacement for conventional diesel which derived from fossil fuel. Classified biodiesel producing way such as acid, base, supercritical and enzyme methods, this study focused on eco-friendly production of biodiesel using supercritical and immobilized enzyme process. Assuming a plant with a production rate of 10,000 tons a year, a PRO II simulator program was used to simulate the product conversion rate and total energy consumption. The product conversion in supercritical process and immobilized enzyme was found to be 91.17% (including 0.9% glycerol) and 93.18% (including 1.0% glycerol) respectively. The result shows that the efficiency of immobilized enzyme process is higher compared to supercritical process but having lower end product purity. From the energy consumption point of view, supercritical process consume about 8.9 MW while immobilized enzyme process consume much lower energy which is 3.9 MW. Consequently, this study certifies that energy consumption of supercritical process is 2.3 times higher than immobilized enzyme process.

Biogas production using organic waste (유기성 폐기물을 이용한 바이오가스 생산)

  • Yoo, Eunsil;Hong, Soonhyouk;Kim, Daeyoung;Jun, Haks
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2011.11a
    • /
    • pp.110.2-110.2
    • /
    • 2011
  • 바이오가스 생산은 현재 정부에서 추진하고 있는 저탄소 녹색성장으로 인해 더욱 그 가치의 중요성이 부각되고 있다. 스웨덴 Scandinavian Biogas Fuel AB(SBF) 사의 바이오 가스 생산 기술을 이용함으로 소화효율을 개선하고 바이오가스 발생량을 극대화하였다. 전국 403개 공공하수처리시설 중 소화조가 설치된 처리시설은 65 개소이며 이중 57 개소에서 총 64개 소화조를 운영 중이다. 하지만 국내 소화조의 효율은 유입수질 저하, 운영, 관리 미숙으로 인해 전진국의 1/4 수준으로 에너지 이용률이 미미한 편이다. 환경부는 2010년부터 에너지 이용, 생산사용 확대, 추진을 위해 하수처리시설별 이용 가능한 에너지 잠재력의 종류, 양, 지역 내 수요자, 공급자 의 현황 규모 등을 정리해 2012년부터 에너지 이용사업 확대를 추진한다. SBF의 기술을 바탕으로 하수처리시설에서 들어오는 하루 슬러지 $1370m^3$와 음식물쓰레기 180t을 함께 처리하며 바이오가스 생산량을 더욱 늘렸다. 각 $7,000m^3$의 달걀모양(egg shape) 소화조 2개를 운영하며 생 슬러지와 음식물 쓰레기 처리 후 바로 소화조로 투입, 혐기 소화하는 방식이며 슬러지 최종처분방법은 탈수 후 소각된다. 반입되는 생 슬러지의 평균 TS 1.7%, VS 63% 이며 농축 후에는 평균 TS 9%, VS 75% 이다. 또 소화조로 들어가는 음식물 쓰레기는 평균 TS 8%, VS 85% 이며 소화 후 평균 TS 3.6% VS 59% 이다. 그리고 소화조의 pH는 7.3~7.8,유기산의 농도는 150mg/L~350mg/L, 가스발생량은 하루 평균 $26,500Nm^3$이며 소화효율은 평균 67%이다. 혐기성소화는 산소가 없는 무 산소 상태 에서 분해 가능한 유기물을 분해시켜 메탄으로 전환시키고 우리는 현재 이 가스를 소화조 가온에 사용하고, 판매하고 있다. 소화효율을 높이기 위하여 가온과 교반이 행해지는데 가온방식은 직접가온방식(증기주입식)과 간접가온방식(열교환방식)이 있다. 그중 우리는 간접가온방식을 채택하여 소화효율을 높였고 일반중온 혐기소화온도보다 약간 높은 $38^{\circ}C$로 운전한다. 그리고 일반적으로 알려진 교반방식인 가스교반, 기계교반, 이 둘은 병행한 교반이 아닌 독자적인 방법을 이용, 소화조 내의 슬러지가 정체되어 교반되지 않는 부분을 최소화 하였다. 이때 미생물이 투입되기 힘든 소화조 아래 쪽 으로도 고루분포 되어 슬러지를 이용 하게 되고 소화조 상하부의 온도차가 $1^{\circ}C$ 이하로 거의 완벽한 교반상태를 보여 줌 으로써 소화효율을 최대한으로 한다. 더욱이 소화일수 부족으로 인한 전반적 소화효율 저하가 발생하지 않도록 input과 output 조절을 통한 적정소화일수 20~25일을 최대한 맞추어 운전하여 소화조 설계용량의 평균 90%를 활용하고 있다.

  • PDF

The Economic and Environmental Impact of the Small Hydropower Development in Korea: A CGE Analysis (소수력 발전 확대의 경제.환경적 효과: 연산일반균형모형 분석)

  • Kim, Jae-Joon;Park, Sung-Je
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.106-106
    • /
    • 2011
  • 소수력은 온실가스 배출량이 적은 친환경 청정에너지원이면서 지역의 분산전원에 기여할 수 있는 유용한 자원으로 평가되고 있다. 이러한 여건은 소수력발전 사업이 전력의 smart grid 구축 효과로 인해 가장 큰 효율성을 달성할 수 있을 것으로 기대된다. 국내 소수력발전은 1500Mw의 부존량을 가진 것으로 평가되고 있으나 계절적 편중으로 인한 가동률 부족, 경제성 부족 등으로 활발한 보급이 이루어지지 않고 있다. 특히 신재생에너지 확대 전략에도 불구하고 지원금 등 경제적 인센티브 부족으로 인해 민간부문의 참여는 상당히 저조하다. 그럼에도 불구하고 수력에너지는 환경친화적이고 잠재성이 큰 신재생에너지로 온실가스 저감과 에너지 확보에 기여할 수 있다. 특히 수력에너지는 민간투자의 어려움이 존재하므로 정부의 장기적인 기술개발투자 및 효율성 확대 정책이 중요하다. 본 연구에서는 소수력 확대의 경제 환경적 효과를 평가해보기 위해 연산일반균형모형 (CGE :Computable General Equilibrium Model)을 구축한다. 본 연구는 다음과 같이 수행되었다. 첫째, 수력발전부문과 수도사업을 구분하고 사회회계행렬을 작성하였으며, 전력부문에서 수력발전을 포함한 다단계 생산구조를 가정하였다. 둘째, 일반균형모형 방정식 체계를 작성하고 모형의 파라미터 추정 등 보정(Calibration) 작업을 수행하였다. 셋째, 국가 중기 온실가스저감 시나리오를 적용한 전망을 수행하고 소수력 확대(투자지원) 시나리오를 구축한다. 본 연구는 저감수단으로 탄소세를 부과하였다. 끝으로, 소수력 발전 보급 확대의 경제적, 환경적 파급효과를 계산하였다. 분석결과, 소수력 발전 잠재 성장을 반영한 수력에너지 비중은 약 2020년에 약 4.5% 까지 증가하는 것으로 나타났다. 이로 인한 온실가스 저감 기여분은 약 3%에 이르는 것으로 계산 되었다. 또한 수도사업과 비에너지 제조업의 산업비중은 증가하였다. 이러한 결과는 소수력 발전 확대가 화석연료 대체를 통한 지속가능한 에너지 수요에 기여하고 지역개발과 물산업 발전 등 경제적 파급효과 등을 유발할 수 있음을 시사한다. 또한 본 연구에서 고려하지 못한 소수력 기술 개발은 에너지 대체 촉진으로 인한 온실가스 저감과 녹색성장에 기여할 것이다.

  • PDF

Harmonic mode locking of 'Figure-of-Eight' fiber soliton laser using regenerative phase modulation (재생형 위상 변조에 의한 '8'자 구조 광섬유 솔리톤 레이저의 고차 조화 모드록킹)

  • 윤승철;박희갑
    • Korean Journal of Optics and Photonics
    • /
    • v.10 no.2
    • /
    • pp.146-151
    • /
    • 1999
  • We demonstrated a harmonic mode locking scheme that used regeneratie phase modulation to get a high and stable repetition rate in a figure-of-eight fiber soliton laser. From the detected beat spectra of the laser output, a sinusoidal clock freguency tone of 400 MHz, the 96th harmonics of the fundamental mode locking frequency, was extracted with a high Q filter and was used to drive the phase modulator, resulting in stable output of soliton pulse train synchronized with the modulation signal. Generated soliton pulses had FWHM pulsewidth of 930 fs and 3.1 nm linewidth, yielding pulsewidth-bandwidth product of 0.359 that was close to the transform limit. As the modulation frequency always followed the beat frequency of laser modes, stable harmonic mode locking was achieved without the adjustment of the cavity length, which has been commonly required in actively mode-locked lasers.

  • PDF

A New Coding Technique for Scalable Video Service of Digital Hologram (디지털 홀로그램의 적응적 비디오 서비스를 위한 코딩 기법)

  • Seo, Young-Ho;Bea, Yoon-Jin;Lee, Yoon-Hyuk;Choi, Hyun-Jun;Yoo, Ji-Sang;Kim, Dong-Wook
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.49 no.9
    • /
    • pp.92-103
    • /
    • 2012
  • In this paper, we discuss and propose a new algorithm of coding technique for scalably servicing holographic video in various decoding environment. The proposed algorithm consists of the hologram-based resolution scalable coding (HRS) and the light source-based SNR scalable coding (LSS). They are classified by the method generating and capturing hologram. HRS is a scalable coding technique for the optically captured hologram and LSS is one for the light source before generating hologram. HRS can provide the scalable service of 8 steps with the compression ratio from 1:1 to 100:1 for a $1,024{\times}1,024$ hologram. LSS can also provide the various service depending on the number of the light source division using lossless compression. The proposed techniques showed the scalable holographic video service according to the display with the various resolutions, computational power of the receiving equipment, and the network bandwidth.

Cold Tolerance of Ground Cover Plants for Use as Green Roofs and Walls (옥상 및 벽면녹화용 지피식물의 내한성 비교)

  • Ryu, Ju Hyun;Lee, Hyo Beom;Kim, Cheol Min;Jung, Hyun Hwan;Kim, Ki Sun
    • Horticultural Science & Technology
    • /
    • v.32 no.5
    • /
    • pp.590-599
    • /
    • 2014
  • This study was conducted to compare the cold tolerance of seven ground cover species, Orostachys japonica, Sedum oryzifolium, S. kamtschaticum 'SG1', S. reflexum, S. rupestre 'Blue Spruce', S. spurium 'Green Mental', and S. takesimense, which have been used for green roof and wall systems in Korea. Plants were grown in 10-cm pots and 1 g of tissues at stem-end and crown of each species were kept under either light or dark condition, respectively. For cold tolerance tests, plants were initially left at $4^{\circ}C$ and linearly cooled to 0, -4, -8, -12, -16, and $-20^{\circ}C$ at $-2^{\circ}C{\cdot}h^{-1}$ rate. Low temperature injury and regrowth rates were visually evaluated and assessed by image analysis, respectively. The lethal temperature ($LT_{50}$) of plant species was determined using electrolyte leakage measurements. S. reflexum was the most cold tolerant, showing the most survival at $-16^{\circ}C$, whereas S. oryzifolium and S. takesimense showed low temperature injury at $-8^{\circ}C$. Similar results were found with electrolyte leakage measurements at the stem end. For each species, the crown (Mean $LT_{50}:\;-12.15^{\circ}C$) was more cold tolerant than the stem end (Mean $LT_{50}:\;-10.47^{\circ}C$). In conclusion, S. reflexum and S. rupestre 'Blue Spruce' are recommended for planting in the central region of Korea during late fall and early winter, as they were more cold tolerant and showed more vigorous regrowth than the other tested plant species.

Investigation on Material Flow Diagram for PVC(poly vinyl Chloride) Profile Based Production, Generation, Recycling and Treatment (PVC재질 프로파일의 생산, 발생 및 재활용, 처리에 기반한 물질흐름도 검토)

  • Phae, Chae-Gun;Jung, Oh-Jin
    • Elastomers and Composites
    • /
    • v.47 no.2
    • /
    • pp.129-140
    • /
    • 2012
  • The objective of this study was to estimate the practical recycling rate of plastic products, so that the study was conducted to build material flow diagram for PVC profile. For this objective, product generation, waste generation and recycling status were investigated. Using collected and analyzed status data, analysis of material flow by product and building material flow diagram were conducted. As result of estimating the recycling rate by product, The sum of domestic demand was 525,448 ton and waste generation was 105,853ton in PVC flooring and profile. The sum of generation of recycling product and raw material was investigated to be 76,004ton(14.46%), which is higher compared to recycling obligation(8.5%) in 2009. To build the material flow diagram in the years(5~20years) ahead, prediction of future demand was based on the assumption that there will be no difference in annual generation of current and future. As the recycling rate of flooring and profile increases, it is estimated to reach 20% in 2013 according to the material flow diagram.

Constant Quality Motion Compensated Temporal Filtering Video Compression using Multi-block size Motion Estimation and SPECK (다중 블록 크기의 움직임 예측과 SPECK을 이용한 고정 화질 움직임 보상 시간영역 필터링 동영상 압축)

  • Park Sang-Ju
    • Journal of Broadcast Engineering
    • /
    • v.11 no.2 s.31
    • /
    • pp.153-163
    • /
    • 2006
  • We propose a new video compression method based on MCTF(motion compensated temporal filtering) with constant quality. SPECK is an efficient image compression coding method of encoding DWT coefficients. Especially SPECK method is very efficient for coding the motion compensated residual image which usually has larger amounts of high frequency components than the natural images. And proposed multi block size hierarchical motion estimation technique is more efficient than classical block matching algorithm with fixed block size both in estimation precision and operation costs. Proposed video method based on MCTF video compression can also support multi-frame rate decoding with reasonable complexity. Simulation results showed that proposed method outperforms H.263 video compression standard.